mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-06 13:14:27 +00:00
8177c5c452
This adds the definitions need to use the USB OTG in rv1108 board. This has been tested using USB Mass Storage to export and program a eMMC device. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
581 lines
14 KiB
Text
581 lines
14 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/rv1108-cru.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
compatible = "rockchip,rv1108";
|
|
|
|
interrupt-parent = <&gic>;
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
spi0 = &sfc;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@f00 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0xf00>;
|
|
};
|
|
};
|
|
|
|
arm-pmu {
|
|
compatible = "arm,cortex-a7-pmu";
|
|
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
xin24m: oscillator {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "xin24m";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
amba {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
pdma: pdma@102a0000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x102a0000 0x4000>;
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
|
|
#dma-cells = <1>;
|
|
arm,pl330-broken-no-flushp;
|
|
clocks = <&cru ACLK_DMAC>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
};
|
|
|
|
bus_intmem@10080000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x10080000 0x2000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x10080000 0x2000>;
|
|
};
|
|
|
|
uart2: serial@10210000 {
|
|
compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
|
|
reg = <0x10210000 0x100>;
|
|
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clock-frequency = <24000000>;
|
|
clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2m0_xfer>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@10220000 {
|
|
compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
|
|
reg = <0x10220000 0x100>;
|
|
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clock-frequency = <24000000>;
|
|
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_xfer>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: serial@10230000 {
|
|
compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
|
|
reg = <0x10230000 0x100>;
|
|
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clock-frequency = <24000000>;
|
|
clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
|
|
clock-names = "baudclk", "apb_pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
|
|
status = "disabled";
|
|
};
|
|
|
|
grf: syscon@10300000 {
|
|
compatible = "rockchip,rv1108-grf", "syscon", "simple-mfd";
|
|
reg = <0x10300000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
u2phy: usb2-phy@100 {
|
|
compatible = "rockchip,rv1108-usb2phy";
|
|
reg = <0x100 0x0c>;
|
|
clocks = <&cru SCLK_USBPHY>;
|
|
clock-names = "phyclk";
|
|
#clock-cells = <0>;
|
|
clock-output-names = "usbphy";
|
|
rockchip,usbgrf = <&usbgrf>;
|
|
status = "disabled";
|
|
|
|
u2phy_otg: otg-port {
|
|
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "otg-mux";
|
|
#phy-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
u2phy_host: host-port {
|
|
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "linestate";
|
|
#phy-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
saradc: saradc@1038c000 {
|
|
compatible = "rockchip,rv1108-saradc", "rockchip,rk3399-saradc";
|
|
reg = <0x1038c000 0x100>;
|
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
|
#io-channel-cells = <1>;
|
|
clock-frequency = <1000000>;
|
|
clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
|
|
clock-names = "saradc", "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
pmugrf: syscon@20060000 {
|
|
compatible = "rockchip,rv1108-pmugrf", "syscon";
|
|
reg = <0x20060000 0x1000>;
|
|
};
|
|
|
|
usbgrf: syscon@202a0000 {
|
|
compatible = "rockchip,rv1108-usbgrf", "syscon";
|
|
reg = <0x202a0000 0x1000>;
|
|
};
|
|
|
|
cru: clock-controller@20200000 {
|
|
compatible = "rockchip,rv1108-cru";
|
|
reg = <0x20200000 0x1000>;
|
|
rockchip,grf = <&grf>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
emmc: dwmmc@30110000 {
|
|
compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
|
|
clock-freq-min-max = <400000 150000000>;
|
|
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
|
|
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
|
|
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
|
|
fifo-depth = <0x100>;
|
|
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x30110000 0x4000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdio: dwmmc@30120000 {
|
|
compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
|
|
clock-freq-min-max = <400000 150000000>;
|
|
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
|
|
<&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
|
|
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
|
|
fifo-depth = <0x100>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x30120000 0x4000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdmmc: dwmmc@30130000 {
|
|
compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
|
|
clock-freq-min-max = <400000 100000000>;
|
|
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
|
|
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
|
|
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
|
|
fifo-depth = <0x100>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x30130000 0x4000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb_host_ehci: usb@30140000 {
|
|
compatible = "generic-ehci";
|
|
reg = <0x30140000 0x20000>;
|
|
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb_host_ohci: usb@30160000 {
|
|
compatible = "generic-ohci";
|
|
reg = <0x30160000 0x20000>;
|
|
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb20_otg: usb@30180000 {
|
|
compatible = "rockchip,rv1108-usb", "rockchip,rk3066-usb",
|
|
"snps,dwc2";
|
|
reg = <0x30180000 0x40000>;
|
|
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru HCLK_OTG>;
|
|
clock-names = "otg";
|
|
dr_mode = "otg";
|
|
g-np-tx-fifo-size = <16>;
|
|
g-rx-fifo-size = <280>;
|
|
g-tx-fifo-size = <256 128 128 64 32 16>;
|
|
g-use-dma;
|
|
phys = <&u2phy_otg>;
|
|
phy-names = "usb2-phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
sfc: sfc@301c0000 {
|
|
compatible = "rockchip,sfc";
|
|
reg = <0x301c0000 0x200>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
|
|
clock-names = "clk_sfc", "hclk_sfc";
|
|
pinctrl-0 = <&sfc_pins>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
gmac: ethernet@30200000 {
|
|
compatible = "rockchip,rv1108-gmac";
|
|
reg = <0x30200000 0x10000>;
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "macirq";
|
|
rockchip,grf = <&grf>;
|
|
clocks = <&cru SCLK_MAC>,
|
|
<&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
|
|
<&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
|
|
<&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
|
|
clock-names = "stmmaceth",
|
|
"mac_clk_rx", "mac_clk_tx",
|
|
"clk_mac_ref", "clk_mac_refout",
|
|
"aclk_mac", "pclk_mac";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rmii_pins>;
|
|
phy-mode = "rmii";
|
|
max-speed = <100>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gic: interrupt-controller@32010000 {
|
|
compatible = "arm,gic-400";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <0>;
|
|
|
|
reg = <0x32011000 0x1000>,
|
|
<0x32012000 0x1000>,
|
|
<0x32014000 0x2000>,
|
|
<0x32016000 0x2000>;
|
|
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
};
|
|
|
|
pinctrl: pinctrl {
|
|
compatible = "rockchip,rv1108-pinctrl";
|
|
rockchip,grf = <&grf>;
|
|
rockchip,pmu = <&pmugrf>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
gpio0: gpio0@20030000 {
|
|
compatible = "rockchip,gpio-bank";
|
|
reg = <0x20030000 0x100>;
|
|
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&xin24m>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio1: gpio1@10310000 {
|
|
compatible = "rockchip,gpio-bank";
|
|
reg = <0x10310000 0x100>;
|
|
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&xin24m>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio2@10320000 {
|
|
compatible = "rockchip,gpio-bank";
|
|
reg = <0x10320000 0x100>;
|
|
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&xin24m>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio3: gpio3@10330000 {
|
|
compatible = "rockchip,gpio-bank";
|
|
reg = <0x10330000 0x100>;
|
|
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&xin24m>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
pcfg_pull_up: pcfg-pull-up {
|
|
bias-pull-up;
|
|
};
|
|
|
|
pcfg_pull_down: pcfg-pull-down {
|
|
bias-pull-down;
|
|
};
|
|
|
|
pcfg_pull_none: pcfg-pull-none {
|
|
bias-disable;
|
|
};
|
|
|
|
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
|
|
drive-strength = <8>;
|
|
};
|
|
|
|
pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma {
|
|
drive-strength = <12>;
|
|
};
|
|
|
|
pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
|
|
bias-pull-up;
|
|
drive-strength = <8>;
|
|
};
|
|
|
|
pcfg_pull_none_drv_4ma: pcfg-pull-none-drv-4ma {
|
|
drive-strength = <4>;
|
|
};
|
|
|
|
pcfg_pull_up_drv_4ma: pcfg-pull-up-drv-4ma {
|
|
bias-pull-up;
|
|
drive-strength = <4>;
|
|
};
|
|
|
|
pcfg_output_high: pcfg-output-high {
|
|
output-high;
|
|
};
|
|
|
|
pcfg_output_low: pcfg-output-low {
|
|
output-low;
|
|
};
|
|
|
|
pcfg_input_high: pcfg-input-high {
|
|
bias-pull-up;
|
|
input-enable;
|
|
};
|
|
|
|
gmac {
|
|
rmii_pins: rmii-pins {
|
|
rockchip,pins = <1 RK_PC5 RK_FUNC_2 &pcfg_pull_none>,
|
|
<1 RK_PC3 RK_FUNC_2 &pcfg_pull_none>,
|
|
<1 RK_PC4 RK_FUNC_2 &pcfg_pull_none>,
|
|
<1 RK_PB2 RK_FUNC_3 &pcfg_pull_none_drv_12ma>,
|
|
<1 RK_PB3 RK_FUNC_3 &pcfg_pull_none_drv_12ma>,
|
|
<1 RK_PB4 RK_FUNC_3 &pcfg_pull_none_drv_12ma>,
|
|
<1 RK_PB5 RK_FUNC_3 &pcfg_pull_none>,
|
|
<1 RK_PB6 RK_FUNC_3 &pcfg_pull_none>,
|
|
<1 RK_PB7 RK_FUNC_3 &pcfg_pull_none>,
|
|
<1 RK_PC2 RK_FUNC_3 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
i2c1 {
|
|
i2c1_xfer: i2c1-xfer {
|
|
rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
|
|
<2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
i2c2m1 {
|
|
i2c2m1_xfer: i2c2m1-xfer {
|
|
rockchip,pins = <0 RK_PC2 RK_FUNC_2 &pcfg_pull_none>,
|
|
<0 RK_PC6 RK_FUNC_3 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2c2m1_gpio: i2c2m1-gpio {
|
|
rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,
|
|
<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
i2c2m05v {
|
|
i2c2m05v_xfer: i2c2m05v-xfer {
|
|
rockchip,pins = <1 RK_PD5 RK_FUNC_2 &pcfg_pull_none>,
|
|
<1 RK_PD4 RK_FUNC_2 &pcfg_pull_none>;
|
|
};
|
|
|
|
i2c2m05v_gpio: i2c2m05v-gpio {
|
|
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
|
|
<1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
i2c3 {
|
|
i2c3_xfer: i2c3-xfer {
|
|
rockchip,pins = <0 RK_PB6 RK_FUNC_1 &pcfg_pull_none>,
|
|
<0 RK_PC4 RK_FUNC_2 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
sfc {
|
|
sfc_pins: sfc-pins {
|
|
rockchip,pins = <2 RK_PA3 RK_FUNC_3 &pcfg_pull_none>,
|
|
<2 RK_PA2 RK_FUNC_3 &pcfg_pull_none>,
|
|
<2 RK_PA1 RK_FUNC_3 &pcfg_pull_none>,
|
|
<2 RK_PA0 RK_FUNC_3 &pcfg_pull_none>,
|
|
<2 RK_PB7 RK_FUNC_2 &pcfg_pull_none>,
|
|
<2 RK_PB4 RK_FUNC_3 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
emmc {
|
|
emmc_clk: emmc-clk {
|
|
rockchip,pins = <2 RK_PB6 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
|
|
};
|
|
|
|
emmc_cmd: emmc-cmd {
|
|
rockchip,pins = <2 RK_PB4 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
|
|
};
|
|
|
|
emmc_pwren: emmc-pwren {
|
|
rockchip,pins = <2 RK_PC2 RK_FUNC_2 &pcfg_pull_none>;
|
|
};
|
|
|
|
emmc_bus1: emmc-bus1 {
|
|
rockchip,pins = <2 RK_PA0 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
|
|
};
|
|
|
|
emmc_bus8: emmc-bus8 {
|
|
rockchip,pins = <2 RK_PA0 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
|
|
<2 RK_PA1 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
|
|
<2 RK_PA2 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
|
|
<2 RK_PA3 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
|
|
<2 RK_PA4 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
|
|
<2 RK_PA5 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
|
|
<2 RK_PA6 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
|
|
<2 RK_PA7 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
|
|
};
|
|
};
|
|
|
|
sdmmc {
|
|
sdmmc_clk: sdmmc-clk {
|
|
rockchip,pins = <3 RK_PC4 RK_FUNC_1 &pcfg_pull_none_drv_4ma>;
|
|
};
|
|
|
|
sdmmc_cmd: sdmmc-cmd {
|
|
rockchip,pins = <3 RK_PC5 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
|
|
};
|
|
|
|
sdmmc_cd: sdmmc-cd {
|
|
rockchip,pins = <0 RK_PA1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
|
|
};
|
|
|
|
sdmmc_bus1: sdmmc-bus1 {
|
|
rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
|
|
};
|
|
|
|
sdmmc_bus4: sdmmc-bus4 {
|
|
rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
|
|
<3 RK_PC2 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
|
|
<3 RK_PC1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
|
|
<3 RK_PC0 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
|
|
};
|
|
};
|
|
|
|
uart0 {
|
|
uart0_xfer: uart0-xfer {
|
|
rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>,
|
|
<3 RK_PA5 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
|
|
uart0_cts: uart0-cts {
|
|
rockchip,pins = <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
|
|
uart0_rts: uart0-rts {
|
|
rockchip,pins = <3 RK_PA3 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
|
|
uart0_rts_gpio: uart0-rts-gpio {
|
|
rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
uart1 {
|
|
uart1_xfer: uart1-xfer {
|
|
rockchip,pins = <1 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
|
|
<1 RK_PD2 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
|
|
uart1_cts: uart1-cts {
|
|
rockchip,pins = <1 RK_PD0 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
|
|
uart01rts: uart1-rts {
|
|
rockchip,pins = <1 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
uart2m0 {
|
|
uart2m0_xfer: uart2m0-xfer {
|
|
rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>,
|
|
<2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
uart2m1 {
|
|
uart2m1_xfer: uart2m1-xfer {
|
|
rockchip,pins = <3 RK_PC3 RK_FUNC_2 &pcfg_pull_up>,
|
|
<3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
uart2_5v {
|
|
uart2_5v_cts: uart2_5v-cts {
|
|
rockchip,pins = <1 RK_PD4 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
|
|
uart2_5v_rts: uart2_5v-rts {
|
|
rockchip,pins = <1 RK_PD5 RK_FUNC_1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
};
|