u-boot/arch/mips/dts/serval2_pcb112.dts
Horatiu Vultur 1141176163 net: mscc: jaguar2: Add ethenet nodes for Jaguar2.
Add ethernet nodes for Jaguar2 SoCs family. There are 3 pcb in this
family: pcb110, pcb111 and pcb112.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
2019-04-12 17:32:51 +02:00

104 lines
1.6 KiB
Text

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 Microsemi Corporation
*/
/dts-v1/;
#include "mscc,jr2.dtsi"
#include <dt-bindings/mscc/jr2_data.h>
/ {
model = "Serval2 NID PCB112 Reference Board";
compatible = "mscc,serval2-pcb110", "mscc,jr2";
aliases {
spi0 = &spi0;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-leds {
compatible = "gpio-leds";
status_green {
label = "pcb110:green:status";
gpios = <&gpio 12 0>;
default-state = "on";
};
status_red {
label = "pcb110:red:status";
gpios = <&gpio 13 0>;
default-state = "off";
};
};
};
&uart0 {
status = "okay";
};
&spi0 {
status = "okay";
spi-flash@0 {
compatible = "spi-flash";
spi-max-frequency = <18000000>; /* input clock */
reg = <0>; /* CS0 */
};
};
&sgpio {
status = "okay";
sgpio-ports = <0x0000ffff>;
};
&sgpio2 {
status = "okay";
sgpio-ports = <0x3fe0ffff>;
};
&mdio0 {
status = "okay";
phy16: ethernet-phy@16 {
reg = <16>;
};
phy17: ethernet-phy@17 {
reg = <17>;
};
phy18: ethernet-phy@18 {
reg = <18>;
};
phy19: ethernet-phy@19 {
reg = <19>;
};
};
&switch {
ethernet-ports {
port0: port@0 {
reg = <24>;
phy-handle = <&phy16>;
phys = <&serdes_hsio 24 SERDES6G(0) PHY_MODE_SGMII>;
};
port1: port@1 {
reg = <25>;
phy-handle = <&phy17>;
phys = <&serdes_hsio 25 SERDES6G(1) PHY_MODE_SGMII>;
};
port2: port@2 {
reg = <26>;
phy-handle = <&phy18>;
phys = <&serdes_hsio 26 SERDES6G(2) PHY_MODE_SGMII>;
};
port3: port@3 {
reg = <27>;
phy-handle = <&phy19>;
phys = <&serdes_hsio 27 SERDES6G(3) PHY_MODE_SGMII>;
};
};
};