u-boot/board/freescale/b4860qds
Shaveta Leekha 652e29b4a0 board/b4qds: VID support
The fuse status register provides the values from on-chip
voltage ID efuses programmed at the factory.
These values define the voltage requirements for
the chip. u-boot reads FUSESR and translates the values
into the appropriate commands to set the voltage output
value of an external voltage regulator.

B4860QDS has a PowerOne ZM7300 programmable digital Power
Manager which is programmed as per the value read from
the fuses.

Reference for this code is taken from t4qds VID implementation.

Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
2014-05-13 08:20:31 -07:00
..
b4_pbi.cfg board/b4860qds:Slow MDC clock to comply IEEE specs in PBI config 2014-04-22 17:58:47 -07:00
b4_rcw.cfg powerpc/b4860/pbl: fix rcw cfg 2014-01-02 14:10:14 -08:00
b4860qds.c board/b4qds: VID support 2014-05-13 08:20:31 -07:00
b4860qds.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
b4860qds_crossbar_con.h board/b4860qds: Add support to make Aurora work on B4860QDS 2014-03-07 14:49:16 -08:00
b4860qds_qixis.h SGMII:fix PHY addresses for QSGMII Riser Card working in SGMII mode 2013-10-16 16:13:11 -07:00
ddr.c board/b4qds:Add support of 2 stage NAND boot-loader 2014-04-22 17:58:51 -07:00
eth_b4860qds.c 85xx/b4860: Alternate serdes protocols for B4860/B4420 2014-03-07 14:50:00 -08:00
law.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
Makefile board/b4qds:Add support of 2 stage NAND boot-loader 2014-04-22 17:58:51 -07:00
pci.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
spl.c board/b4qds:Add support of 2 stage NAND boot-loader 2014-04-22 17:58:51 -07:00
tlb.c board/b4qds:Add support of 2 stage NAND boot-loader 2014-04-22 17:58:51 -07:00