Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-07 05:34:28 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/x86/cpu/broadwell/sata.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

268 lines
6.9 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2016 Google, Inc
*
* From coreboot src/soc/intel/broadwell/sata.c
*/
#include <common.h>
#include <dm.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/intel_regs.h>
#include <asm/lpc_common.h>
#include <asm/pch_common.h>
#include <asm/pch_common.h>
#include <asm/arch/pch.h>
struct sata_platdata {
int port_map;
uint port0_gen3_tx;
uint port1_gen3_tx;
uint port0_gen3_dtle;
uint port1_gen3_dtle;
/*
* SATA DEVSLP Mux
* 0 = port 0 DEVSLP on DEVSLP0/GPIO33
* 1 = port 3 DEVSLP on DEVSLP0/GPIO33
*/
int devslp_mux;
/*
* DEVSLP Disable
* 0: DEVSLP is enabled
* 1: DEVSLP is disabled
*/
int devslp_disable;
};
static void broadwell_sata_init(struct udevice *dev)
{
struct sata_platdata *plat = dev_get_platdata(dev);
u32 reg32;
u8 *abar;
u16 reg16;
int port;
debug("SATA: Initializing controller in AHCI mode.\n");
/* Set timings */
dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE);
dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE);
/* for AHCI, Port Enable is managed in memory mapped space */
dm_pci_read_config16(dev, 0x92, &reg16);
reg16 &= ~0xf;
reg16 |= 0x8000 | plat->port_map;
dm_pci_write_config16(dev, 0x92, reg16);
udelay(2);
/* Setup register 98h */
dm_pci_read_config32(dev, 0x98, &reg32);
reg32 &= ~((1 << 31) | (1 << 30));
reg32 |= 1 << 23;
reg32 |= 1 << 24; /* Enable MPHY Dynamic Power Gating */
dm_pci_write_config32(dev, 0x98, reg32);
/* Setup register 9Ch */
reg16 = 0; /* Disable alternate ID */
reg16 = 1 << 5; /* BWG step 12 */
dm_pci_write_config16(dev, 0x9c, reg16);
/* SATA Initialization register */
reg32 = 0x183;
reg32 |= (plat->port_map ^ 0xf) << 24;
reg32 |= (plat->devslp_mux & 1) << 15;
dm_pci_write_config32(dev, 0x94, reg32);
/* Initialize AHCI memory-mapped space */
dm_pci_read_config32(dev, PCI_BASE_ADDRESS_5, &reg32);
abar = (u8 *)reg32;
debug("ABAR: %p\n", abar);
/* CAP (HBA Capabilities) : enable power management */
clrsetbits_le32(abar + 0x00, 0x00020060 /* SXS+EMS+PMS */,
0x0c006000 /* PSC+SSC+SALP+SSS */ |
1 << 18); /* SAM: SATA AHCI MODE ONLY */
/* PI (Ports implemented) */
writel(plat->port_map, abar + 0x0c);
(void) readl(abar + 0x0c); /* Read back 1 */
(void) readl(abar + 0x0c); /* Read back 2 */
/* CAP2 (HBA Capabilities Extended)*/
if (plat->devslp_disable) {
clrbits_le32(abar + 0x24, 1 << 3);
} else {
/* Enable DEVSLP */
setbits_le32(abar + 0x24, 1 << 5 | 1 << 4 | 1 << 3 | 1 << 2);
for (port = 0; port < 4; port++) {
if (!(plat->port_map & (1 << port)))
continue;
/* DEVSLP DSP */
setbits_le32(abar + 0x144 + (0x80 * port), 1 << 1);
}
}
/* Static Power Gating for unused ports */
reg32 = readl(RCB_REG(0x3a84));
/* Port 3 and 2 disabled */
if ((plat->port_map & ((1 << 3)|(1 << 2))) == 0)
reg32 |= (1 << 24) | (1 << 26);
/* Port 1 and 0 disabled */
if ((plat->port_map & ((1 << 1)|(1 << 0))) == 0)
reg32 |= (1 << 20) | (1 << 18);
writel(reg32, RCB_REG(0x3a84));
/* Set Gen3 Transmitter settings if needed */
if (plat->port0_gen3_tx)
pch_iobp_update(SATA_IOBP_SP0_SECRT88,
~(SATA_SECRT88_VADJ_MASK <<
SATA_SECRT88_VADJ_SHIFT),
(plat->port0_gen3_tx &
SATA_SECRT88_VADJ_MASK)
<< SATA_SECRT88_VADJ_SHIFT);
if (plat->port1_gen3_tx)
pch_iobp_update(SATA_IOBP_SP1_SECRT88,
~(SATA_SECRT88_VADJ_MASK <<
SATA_SECRT88_VADJ_SHIFT),
(plat->port1_gen3_tx &
SATA_SECRT88_VADJ_MASK)
<< SATA_SECRT88_VADJ_SHIFT);
/* Set Gen3 DTLE DATA / EDGE registers if needed */
if (plat->port0_gen3_dtle) {
pch_iobp_update(SATA_IOBP_SP0DTLE_DATA,
~(SATA_DTLE_MASK << SATA_DTLE_DATA_SHIFT),
(plat->port0_gen3_dtle & SATA_DTLE_MASK)
<< SATA_DTLE_DATA_SHIFT);
pch_iobp_update(SATA_IOBP_SP0DTLE_EDGE,
~(SATA_DTLE_MASK << SATA_DTLE_EDGE_SHIFT),
(plat->port0_gen3_dtle & SATA_DTLE_MASK)
<< SATA_DTLE_EDGE_SHIFT);
}
if (plat->port1_gen3_dtle) {
pch_iobp_update(SATA_IOBP_SP1DTLE_DATA,
~(SATA_DTLE_MASK << SATA_DTLE_DATA_SHIFT),
(plat->port1_gen3_dtle & SATA_DTLE_MASK)
<< SATA_DTLE_DATA_SHIFT);
pch_iobp_update(SATA_IOBP_SP1DTLE_EDGE,
~(SATA_DTLE_MASK << SATA_DTLE_EDGE_SHIFT),
(plat->port1_gen3_dtle & SATA_DTLE_MASK)
<< SATA_DTLE_EDGE_SHIFT);
}
/*
* Additional Programming Requirements for Power Optimizer
*/
/* Step 1 */
pch_common_sir_write(dev, 0x64, 0x883c9003);
/* Step 2: SIR 68h[15:0] = 880Ah */
reg32 = pch_common_sir_read(dev, 0x68);
reg32 &= 0xffff0000;
reg32 |= 0x880a;
pch_common_sir_write(dev, 0x68, reg32);
/* Step 3: SIR 60h[3] = 1 */
reg32 = pch_common_sir_read(dev, 0x60);
reg32 |= (1 << 3);
pch_common_sir_write(dev, 0x60, reg32);
/* Step 4: SIR 60h[0] = 1 */
reg32 = pch_common_sir_read(dev, 0x60);
reg32 |= (1 << 0);
pch_common_sir_write(dev, 0x60, reg32);
/* Step 5: SIR 60h[1] = 1 */
reg32 = pch_common_sir_read(dev, 0x60);
reg32 |= (1 << 1);
pch_common_sir_write(dev, 0x60, reg32);
/* Clock Gating */
pch_common_sir_write(dev, 0x70, 0x3f00bf1f);
pch_common_sir_write(dev, 0x54, 0xcf000f0f);
pch_common_sir_write(dev, 0x58, 0x00190000);
clrsetbits_le32(RCB_REG(0x333c), 0x00300000, 0x00c00000);
dm_pci_read_config32(dev, 0x300, &reg32);
reg32 |= 1 << 17 | 1 << 16 | 1 << 19;
reg32 |= 1 << 31 | 1 << 30 | 1 << 29;
dm_pci_write_config32(dev, 0x300, reg32);
dm_pci_read_config32(dev, 0x98, &reg32);
reg32 |= 1 << 29;
dm_pci_write_config32(dev, 0x98, reg32);
/* Register Lock */
dm_pci_read_config32(dev, 0x9c, &reg32);
reg32 |= 1 << 31;
dm_pci_write_config32(dev, 0x9c, reg32);
}
static int broadwell_sata_enable(struct udevice *dev)
{
struct sata_platdata *plat = dev_get_platdata(dev);
struct gpio_desc desc;
u16 map;
int ret;
/*
* Set SATA controller mode early so the resource allocator can
* properly assign IO/Memory resources for the controller.
*/
map = 0x0060;
map |= (plat->port_map ^ 0x3f) << 8;
dm_pci_write_config16(dev, 0x90, map);
ret = gpio_request_by_name(dev, "reset-gpio", 0, &desc, GPIOD_IS_OUT);
if (ret)
return ret;
return 0;
}
static int broadwell_sata_ofdata_to_platdata(struct udevice *dev)
{
struct sata_platdata *plat = dev_get_platdata(dev);
const void *blob = gd->fdt_blob;
int node = dev_of_offset(dev);
plat->port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
plat->port0_gen3_tx = fdtdec_get_int(blob, node,
"intel,sata-port0-gen3-tx", 0);
return 0;
}
static int broadwell_sata_probe(struct udevice *dev)
{
if (!(gd->flags & GD_FLG_RELOC))
return broadwell_sata_enable(dev);
else
broadwell_sata_init(dev);
return 0;
}
static const struct udevice_id broadwell_ahci_ids[] = {
{ .compatible = "intel,wildcatpoint-ahci" },
{ }
};
U_BOOT_DRIVER(ahci_broadwell_drv) = {
.name = "ahci_broadwell",
.id = UCLASS_AHCI,
.of_match = broadwell_ahci_ids,
.ofdata_to_platdata = broadwell_sata_ofdata_to_platdata,
.probe = broadwell_sata_probe,
.platdata_auto_alloc_size = sizeof(struct sata_platdata),
};
Reference in a new issue View git blame Copy permalink