mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 06:12:58 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
206 lines
5.2 KiB
C
206 lines
5.2 KiB
C
/*
|
|
* (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Andreas Heppel <aheppel@sysgo.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/*
|
|
* Initialisation of the PCI-to-ISA bridge and disabling the BIOS
|
|
* write protection (for flash) in function 0 of the chip.
|
|
* Enabling function 1 (IDE controller of the chip.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <config.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <pci.h>
|
|
|
|
#include <w83c553f.h>
|
|
|
|
#define out8(addr,val) do { \
|
|
out_8((u8*) (addr),(val)); udelay(1); \
|
|
} while (0)
|
|
#define out16(addr,val) do { \
|
|
out_be16((u16*) (addr),(val)); udelay(1); \
|
|
} while (0)
|
|
|
|
extern uint ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
|
|
|
|
void initialise_pic(void);
|
|
void initialise_dma(void);
|
|
|
|
void initialise_w83c553f(void)
|
|
{
|
|
pci_dev_t devbusfn;
|
|
unsigned char reg8;
|
|
unsigned short reg16;
|
|
unsigned int reg32;
|
|
|
|
devbusfn = pci_find_device(W83C553F_VID, W83C553F_DID, 0);
|
|
if (devbusfn == -1)
|
|
{
|
|
printf("Error: Cannot find W83C553F controller on any PCI bus.");
|
|
return;
|
|
}
|
|
|
|
pci_read_config_word(devbusfn, PCI_COMMAND, ®16);
|
|
reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
|
|
pci_write_config_word(devbusfn, PCI_COMMAND, reg16);
|
|
|
|
pci_read_config_byte(devbusfn, WINBOND_IPADCR, ®8);
|
|
/* 16 MB ISA memory space */
|
|
reg8 |= (IPADCR_IPATOM4 | IPADCR_IPATOM5 | IPADCR_IPATOM6 | IPADCR_IPATOM7);
|
|
reg8 &= ~IPADCR_MBE512;
|
|
pci_write_config_byte(devbusfn, WINBOND_IPADCR, reg8);
|
|
|
|
pci_read_config_byte(devbusfn, WINBOND_CSCR, ®8);
|
|
/* switch off BIOS write protection */
|
|
reg8 |= CSCR_UBIOSCSE;
|
|
reg8 &= ~CSCR_BIOSWP;
|
|
pci_write_config_byte(devbusfn, WINBOND_CSCR, reg8);
|
|
|
|
/*
|
|
* Interrupt routing:
|
|
* - IDE -> IRQ 9/0
|
|
* - INTA -> IRQ 10
|
|
* - INTB -> IRQ 11
|
|
* - INTC -> IRQ 14
|
|
* - INTD -> IRQ 15
|
|
*/
|
|
pci_write_config_byte(devbusfn, WINBOND_IDEIRCR, 0x90);
|
|
pci_write_config_word(devbusfn, WINBOND_PCIIRCR, 0xABEF);
|
|
|
|
/*
|
|
* Read IDE bus offsets from function 1 device.
|
|
* We must unmask the LSB indicating that ist is an IO address.
|
|
*/
|
|
devbusfn |= PCI_BDF(0,0,1);
|
|
|
|
/*
|
|
* Switch off legacy IRQ for IDE and IDE port 1.
|
|
*/
|
|
pci_write_config_byte(devbusfn, 0x09, 0x8F);
|
|
|
|
pci_read_config_dword(devbusfn, WINDOND_IDECSR, ®32);
|
|
reg32 &= ~(IDECSR_LEGIRQ | IDECSR_P1EN | IDECSR_P1F16);
|
|
pci_write_config_dword(devbusfn, WINDOND_IDECSR, reg32);
|
|
|
|
pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &ide_bus_offset[0]);
|
|
ide_bus_offset[0] &= ~1;
|
|
#if CONFIG_SYS_IDE_MAXBUS > 1
|
|
pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_2, &ide_bus_offset[1]);
|
|
ide_bus_offset[1] &= ~1;
|
|
#endif
|
|
|
|
/*
|
|
* Enable function 1, IDE -> busmastering and IO space access
|
|
*/
|
|
pci_read_config_word(devbusfn, PCI_COMMAND, ®16);
|
|
reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO;
|
|
pci_write_config_word(devbusfn, PCI_COMMAND, reg16);
|
|
|
|
/*
|
|
* Initialise ISA interrupt controller
|
|
*/
|
|
initialise_pic();
|
|
|
|
/*
|
|
* Initialise DMA controller
|
|
*/
|
|
initialise_dma();
|
|
}
|
|
|
|
void initialise_pic(void)
|
|
{
|
|
out8(W83C553F_PIC1_ICW1, 0x11);
|
|
out8(W83C553F_PIC1_ICW2, 0x08);
|
|
out8(W83C553F_PIC1_ICW3, 0x04);
|
|
out8(W83C553F_PIC1_ICW4, 0x01);
|
|
out8(W83C553F_PIC1_OCW1, 0xfb);
|
|
out8(W83C553F_PIC1_ELC, 0x20);
|
|
|
|
out8(W83C553F_PIC2_ICW1, 0x11);
|
|
out8(W83C553F_PIC2_ICW2, 0x08);
|
|
out8(W83C553F_PIC2_ICW3, 0x02);
|
|
out8(W83C553F_PIC2_ICW4, 0x01);
|
|
out8(W83C553F_PIC2_OCW1, 0xff);
|
|
out8(W83C553F_PIC2_ELC, 0xce);
|
|
|
|
out8(W83C553F_TMR1_CMOD, 0x74);
|
|
|
|
out8(W83C553F_PIC2_OCW1, 0x20);
|
|
out8(W83C553F_PIC1_OCW1, 0x20);
|
|
|
|
out8(W83C553F_PIC2_OCW1, 0x2b);
|
|
out8(W83C553F_PIC1_OCW1, 0x2b);
|
|
}
|
|
|
|
void initialise_dma(void)
|
|
{
|
|
unsigned int channel;
|
|
unsigned int rvalue1, rvalue2;
|
|
|
|
/* perform a H/W reset of the devices */
|
|
|
|
out8(W83C553F_DMA1 + W83C553F_DMA1_MC, 0x00);
|
|
out16(W83C553F_DMA2 + W83C553F_DMA2_MC, 0x0000);
|
|
|
|
/* initialise all channels to a sane state */
|
|
|
|
for (channel = 0; channel < 4; channel++) {
|
|
/*
|
|
* dependent upon the channel, setup the specifics:
|
|
*
|
|
* demand
|
|
* address-increment
|
|
* autoinitialize-disable
|
|
* verify-transfer
|
|
*/
|
|
|
|
switch (channel) {
|
|
case 0:
|
|
rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH0SEL|W83C553F_MODE_TT_VERIFY);
|
|
rvalue2 = (W83C553F_MODE_TM_CASCADE|W83C553F_MODE_CH0SEL);
|
|
break;
|
|
case 1:
|
|
rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY);
|
|
rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY);
|
|
break;
|
|
case 2:
|
|
rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY);
|
|
rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY);
|
|
break;
|
|
case 3:
|
|
rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY);
|
|
rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY);
|
|
break;
|
|
default:
|
|
rvalue1 = 0x00;
|
|
rvalue2 = 0x00;
|
|
break;
|
|
}
|
|
|
|
/* write to write mode registers */
|
|
|
|
out8(W83C553F_DMA1 + W83C553F_DMA1_WM, rvalue1 & 0xFF);
|
|
out16(W83C553F_DMA2 + W83C553F_DMA2_WM, rvalue2 & 0x00FF);
|
|
}
|
|
|
|
/* enable all channels */
|
|
|
|
out8(W83C553F_DMA1 + W83C553F_DMA1_CM, 0x00);
|
|
out16(W83C553F_DMA2 + W83C553F_DMA2_CM, 0x0000);
|
|
/*
|
|
* initialize the global DMA configuration
|
|
*
|
|
* DACK# active low
|
|
* DREQ active high
|
|
* fixed priority
|
|
* channel group enable
|
|
*/
|
|
|
|
out8(W83C553F_DMA1 + W83C553F_DMA1_CS, 0x00);
|
|
out16(W83C553F_DMA2 + W83C553F_DMA2_CS, 0x0000);
|
|
}
|