mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 10:30:32 +00:00
2c0d69713c
Users migrating Freescale's PowerPC SoC U-Boot code to their custom board, often overlook the need to execute set_liodns() and setup_portals() being called by platform files. So Move set_liodns() and setup_portals() to common u-boot boot sequence Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
402 lines
8.9 KiB
C
402 lines
8.9 KiB
C
/*
|
|
* Copyright 2014 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <i2c.h>
|
|
#include <netdev.h>
|
|
#include <linux/compiler.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_law.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <asm/fsl_liodn.h>
|
|
#include <fm_eth.h>
|
|
#include <hwconfig.h>
|
|
#include "../common/qixis.h"
|
|
#include "t102xqds.h"
|
|
#include "t102xqds_qixis.h"
|
|
#include "../common/sleep.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int checkboard(void)
|
|
{
|
|
char buf[64];
|
|
struct cpu_type *cpu = gd->arch.cpu;
|
|
static const char *const freq[] = {"100", "125", "156.25", "100.0"};
|
|
int clock;
|
|
u8 sw = QIXIS_READ(arch);
|
|
|
|
printf("Board: %sQDS, ", cpu->name);
|
|
printf("Sys ID: 0x%02x, Board Arch: V%d, ", QIXIS_READ(id), sw >> 4);
|
|
printf("Board Version: %c, boot from ", (sw & 0xf) + 'A' - 1);
|
|
|
|
#ifdef CONFIG_SDCARD
|
|
puts("SD/MMC\n");
|
|
#elif CONFIG_SPIFLASH
|
|
puts("SPI\n");
|
|
#else
|
|
sw = QIXIS_READ(brdcfg[0]);
|
|
sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
|
|
|
|
if (sw < 0x8)
|
|
printf("vBank: %d\n", sw);
|
|
else if (sw == 0x8)
|
|
puts("PromJet\n");
|
|
else if (sw == 0x9)
|
|
puts("NAND\n");
|
|
else if (sw == 0x15)
|
|
printf("IFC Card\n");
|
|
else
|
|
printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
|
|
#endif
|
|
|
|
printf("FPGA: v%d (%s), build %d",
|
|
(int)QIXIS_READ(scver), qixis_read_tag(buf),
|
|
(int)qixis_read_minor());
|
|
/* the timestamp string contains "\n" at the end */
|
|
printf(" on %s", qixis_read_time(buf));
|
|
|
|
puts("SERDES Reference: ");
|
|
sw = QIXIS_READ(brdcfg[2]);
|
|
clock = (sw >> 6) & 3;
|
|
printf("Clock1=%sMHz ", freq[clock]);
|
|
clock = (sw >> 4) & 3;
|
|
printf("Clock2=%sMHz\n", freq[clock]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int select_i2c_ch_pca9547(u8 ch)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
|
|
if (ret) {
|
|
puts("PCA: failed to select proper channel\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int board_mux_lane_to_slot(void)
|
|
{
|
|
ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
u32 srds_prtcl_s1;
|
|
u8 brdcfg9;
|
|
|
|
srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
|
|
FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
|
|
srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
|
|
|
|
|
|
brdcfg9 = QIXIS_READ(brdcfg[9]);
|
|
QIXIS_WRITE(brdcfg[9], brdcfg9 | BRDCFG9_XFI_TX_DISABLE);
|
|
|
|
switch (srds_prtcl_s1) {
|
|
case 0:
|
|
/* SerDes1 is not enabled */
|
|
break;
|
|
case 0xd5:
|
|
case 0x5b:
|
|
case 0x6b:
|
|
case 0x77:
|
|
case 0x6f:
|
|
case 0x7f:
|
|
QIXIS_WRITE(brdcfg[12], 0x8c);
|
|
break;
|
|
case 0x40:
|
|
QIXIS_WRITE(brdcfg[12], 0xfc);
|
|
break;
|
|
case 0xd6:
|
|
case 0x5a:
|
|
case 0x6a:
|
|
case 0x56:
|
|
QIXIS_WRITE(brdcfg[12], 0x88);
|
|
break;
|
|
case 0x47:
|
|
QIXIS_WRITE(brdcfg[12], 0xcc);
|
|
break;
|
|
case 0x46:
|
|
QIXIS_WRITE(brdcfg[12], 0xc8);
|
|
break;
|
|
case 0x95:
|
|
case 0x99:
|
|
brdcfg9 &= ~BRDCFG9_XFI_TX_DISABLE;
|
|
QIXIS_WRITE(brdcfg[9], brdcfg9);
|
|
QIXIS_WRITE(brdcfg[12], 0x8c);
|
|
break;
|
|
case 0x116:
|
|
QIXIS_WRITE(brdcfg[12], 0x00);
|
|
break;
|
|
case 0x115:
|
|
case 0x119:
|
|
case 0x129:
|
|
case 0x12b:
|
|
/* Aurora, PCIe, SGMII, SATA */
|
|
QIXIS_WRITE(brdcfg[12], 0x04);
|
|
break;
|
|
default:
|
|
printf("WARNING: unsupported for SerDes Protocol %d\n",
|
|
srds_prtcl_s1);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PPC_T1024
|
|
static void board_mux_setup(void)
|
|
{
|
|
u8 brdcfg15;
|
|
|
|
brdcfg15 = QIXIS_READ(brdcfg[15]);
|
|
brdcfg15 &= ~BRDCFG15_DIUSEL_MASK;
|
|
|
|
if (hwconfig_arg_cmp("pin_mux", "tdm")) {
|
|
/* Route QE_TDM multiplexed signals to TDM Riser slot */
|
|
QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_TDM);
|
|
QIXIS_WRITE(brdcfg[13], BRDCFG13_TDM_INTERFACE << 2);
|
|
QIXIS_WRITE(brdcfg[5], (QIXIS_READ(brdcfg[5]) &
|
|
~BRDCFG5_SPIRTE_MASK) | BRDCFG5_SPIRTE_TDM);
|
|
} else if (hwconfig_arg_cmp("pin_mux", "ucc")) {
|
|
/* to UCC (ProfiBus) interface */
|
|
QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_UCC);
|
|
} else if (hwconfig_arg_cmp("pin_mux", "hdmi")) {
|
|
/* to DVI (HDMI) encoder */
|
|
QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_HDMI);
|
|
} else if (hwconfig_arg_cmp("pin_mux", "lcd")) {
|
|
/* to DFP (LCD) encoder */
|
|
QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_LCDFM |
|
|
BRDCFG15_LCDPD | BRDCFG15_DIUSEL_LCD);
|
|
}
|
|
|
|
if (hwconfig_arg_cmp("adaptor", "sdxc"))
|
|
/* Route SPI_CS multiplexed signals to SD slot */
|
|
QIXIS_WRITE(brdcfg[5], (QIXIS_READ(brdcfg[5]) &
|
|
~BRDCFG5_SPIRTE_MASK) | BRDCFG5_SPIRTE_SDHC);
|
|
}
|
|
#endif
|
|
|
|
void board_retimer_ds125df111_init(void)
|
|
{
|
|
u8 reg;
|
|
|
|
/* Retimer DS125DF111 is connected to I2C1_CH7_CH5 */
|
|
reg = I2C_MUX_CH7;
|
|
i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, ®, 1);
|
|
reg = I2C_MUX_CH5;
|
|
i2c_write(I2C_MUX_PCA_ADDR_SEC, 0, 1, ®, 1);
|
|
|
|
/* Access to Control/Shared register */
|
|
reg = 0x0;
|
|
i2c_write(I2C_RETIMER_ADDR, 0xff, 1, ®, 1);
|
|
|
|
/* Read device revision and ID */
|
|
i2c_read(I2C_RETIMER_ADDR, 1, 1, ®, 1);
|
|
debug("Retimer version id = 0x%x\n", reg);
|
|
|
|
/* Enable Broadcast */
|
|
reg = 0x0c;
|
|
i2c_write(I2C_RETIMER_ADDR, 0xff, 1, ®, 1);
|
|
|
|
/* Reset Channel Registers */
|
|
i2c_read(I2C_RETIMER_ADDR, 0, 1, ®, 1);
|
|
reg |= 0x4;
|
|
i2c_write(I2C_RETIMER_ADDR, 0, 1, ®, 1);
|
|
|
|
/* Enable override divider select and Enable Override Output Mux */
|
|
i2c_read(I2C_RETIMER_ADDR, 9, 1, ®, 1);
|
|
reg |= 0x24;
|
|
i2c_write(I2C_RETIMER_ADDR, 9, 1, ®, 1);
|
|
|
|
/* Select VCO Divider to full rate (000) */
|
|
i2c_read(I2C_RETIMER_ADDR, 0x18, 1, ®, 1);
|
|
reg &= 0x8f;
|
|
i2c_write(I2C_RETIMER_ADDR, 0x18, 1, ®, 1);
|
|
|
|
/* Select active PFD MUX input as re-timed data (001) */
|
|
i2c_read(I2C_RETIMER_ADDR, 0x1e, 1, ®, 1);
|
|
reg &= 0x3f;
|
|
reg |= 0x20;
|
|
i2c_write(I2C_RETIMER_ADDR, 0x1e, 1, ®, 1);
|
|
|
|
/* Set data rate as 10.3125 Gbps */
|
|
reg = 0x0;
|
|
i2c_write(I2C_RETIMER_ADDR, 0x60, 1, ®, 1);
|
|
reg = 0xb2;
|
|
i2c_write(I2C_RETIMER_ADDR, 0x61, 1, ®, 1);
|
|
reg = 0x90;
|
|
i2c_write(I2C_RETIMER_ADDR, 0x62, 1, ®, 1);
|
|
reg = 0xb3;
|
|
i2c_write(I2C_RETIMER_ADDR, 0x63, 1, ®, 1);
|
|
reg = 0xcd;
|
|
i2c_write(I2C_RETIMER_ADDR, 0x64, 1, ®, 1);
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
#if defined(CONFIG_DEEP_SLEEP)
|
|
if (is_warm_boot())
|
|
fsl_dp_disable_console();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
#ifdef CONFIG_SYS_FLASH_BASE
|
|
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
|
|
int flash_esel = find_tlb_idx((void *)flashbase, 1);
|
|
|
|
/*
|
|
* Remap Boot flash + PROMJET region to caching-inhibited
|
|
* so that flash can be erased properly.
|
|
*/
|
|
|
|
/* Flush d-cache and invalidate i-cache of any FLASH data */
|
|
flush_dcache();
|
|
invalidate_icache();
|
|
|
|
if (flash_esel == -1) {
|
|
/* very unlikely unless something is messed up */
|
|
puts("Error: Could not find TLB for FLASH BASE\n");
|
|
flash_esel = 2; /* give our best effort to continue */
|
|
} else {
|
|
/* invalidate existing TLB entry for flash + promjet */
|
|
disable_tlb(flash_esel);
|
|
}
|
|
|
|
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
|
|
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
|
0, flash_esel, BOOKE_PAGESZ_256M, 1);
|
|
#endif
|
|
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
|
|
board_mux_lane_to_slot();
|
|
board_retimer_ds125df111_init();
|
|
|
|
/* Increase IO drive strength to address FCS error on RGMII */
|
|
out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR, 0xbfdb7800);
|
|
|
|
return 0;
|
|
}
|
|
|
|
unsigned long get_board_sys_clk(void)
|
|
{
|
|
u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
|
|
|
|
switch (sysclk_conf & 0x0F) {
|
|
case QIXIS_SYSCLK_64:
|
|
return 64000000;
|
|
case QIXIS_SYSCLK_83:
|
|
return 83333333;
|
|
case QIXIS_SYSCLK_100:
|
|
return 100000000;
|
|
case QIXIS_SYSCLK_125:
|
|
return 125000000;
|
|
case QIXIS_SYSCLK_133:
|
|
return 133333333;
|
|
case QIXIS_SYSCLK_150:
|
|
return 150000000;
|
|
case QIXIS_SYSCLK_160:
|
|
return 160000000;
|
|
case QIXIS_SYSCLK_166:
|
|
return 166666666;
|
|
}
|
|
return 66666666;
|
|
}
|
|
|
|
unsigned long get_board_ddr_clk(void)
|
|
{
|
|
u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
|
|
|
|
switch ((ddrclk_conf & 0x30) >> 4) {
|
|
case QIXIS_DDRCLK_100:
|
|
return 100000000;
|
|
case QIXIS_DDRCLK_125:
|
|
return 125000000;
|
|
case QIXIS_DDRCLK_133:
|
|
return 133333333;
|
|
}
|
|
return 66666666;
|
|
}
|
|
|
|
#define NUM_SRDS_PLL 2
|
|
int misc_init_r(void)
|
|
{
|
|
#ifdef CONFIG_PPC_T1024
|
|
board_mux_setup();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
void fdt_fixup_spi_mux(void *blob)
|
|
{
|
|
int nodeoff = 0;
|
|
|
|
if (hwconfig_arg_cmp("pin_mux", "tdm")) {
|
|
while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
|
|
"eon,en25s64")) >= 0) {
|
|
fdt_del_node(blob, nodeoff);
|
|
}
|
|
} else {
|
|
/* remove tdm node */
|
|
while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
|
|
"maxim,ds26522")) >= 0) {
|
|
fdt_del_node(blob, nodeoff);
|
|
}
|
|
}
|
|
}
|
|
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
phys_addr_t base;
|
|
phys_size_t size;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
base = getenv_bootm_low();
|
|
size = getenv_bootm_size();
|
|
|
|
fdt_fixup_memory(blob, (u64)base, (u64)size);
|
|
|
|
#ifdef CONFIG_PCI
|
|
pci_of_setup(blob, bd);
|
|
#endif
|
|
|
|
fdt_fixup_liodn(blob);
|
|
|
|
#ifdef CONFIG_HAS_FSL_DR_USB
|
|
fdt_fixup_dr_usb(blob, bd);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_DPAA_FMAN
|
|
fdt_fixup_fman_ethernet(blob);
|
|
fdt_fixup_board_enet(blob);
|
|
#endif
|
|
fdt_fixup_spi_mux(blob);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void qixis_dump_switch(void)
|
|
{
|
|
int i, nr_of_cfgsw;
|
|
|
|
QIXIS_WRITE(cms[0], 0x00);
|
|
nr_of_cfgsw = QIXIS_READ(cms[1]);
|
|
|
|
puts("DIP switch settings dump:\n");
|
|
for (i = 1; i <= nr_of_cfgsw; i++) {
|
|
QIXIS_WRITE(cms[0], i);
|
|
printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
|
|
}
|
|
}
|