u-boot/configs/xilinx_zynqmp_ep_defconfig
Alexander Graf 6a6187efd2 efi_loader: Select bounce buffers for known-bad boards
We know for certain that we have 32bit DMA hardware, but 64bit addresses
on LS2085A and ZynqMP, so let's enable EFI bounce buffers for all defconfigs
on these SoCs.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-05-27 15:39:49 -04:00

67 lines
1.6 KiB
Text

CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_ep"
CONFIG_ARCH_ZYNQMP=y
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_DM_I2C=y
CONFIG_DM_GPIO=y
CONFIG_ZYNQMP_USB=y
CONFIG_SYS_TEXT_BASE=0x8000000
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-ep108"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="ZynqMP> "
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_ENV_EXISTS is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
CONFIG_CMD_DFU=y
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_EMBED=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_SYS_I2C_CADENCE=y
CONFIG_DM_MMC=y
CONFIG_ZYNQ_SDHCI=y
CONFIG_NAND_ARASAN=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_DM_ETH=y
CONFIG_ZYNQ_GEM=y
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_ZYNQ=y
CONFIG_DEBUG_UART_BASE=0xff000000
CONFIG_DEBUG_UART_CLOCK=25000000
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_USB=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GADGET=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_G_DNL_MANUFACTURER="Xilinx"
CONFIG_G_DNL_VENDOR_NUM=0x03fd
CONFIG_G_DNL_PRODUCT_NUM=0x0300
# CONFIG_REGEX is not set
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y