mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
5846ef86f8
The patch fixed by this commit renders ST STM32MP15xx EV1 board and
all DHSOM SoM based boards unbootable from SPI NOR. Fix the damage
by updating -u-boot.dtsi to match the stm32mp15-pinctrl.dtsi update.
Fixes: 08002ffd08 ("ARM: dts: stm32mp: alignment with v6.3")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
366 lines
5.8 KiB
Text
366 lines
5.8 KiB
Text
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
|
|
/*
|
|
* Copyright (C) 2019 Marek Vasut <marex@denx.de>
|
|
*/
|
|
|
|
#include <dt-bindings/clock/stm32mp1-clksrc.h>
|
|
#include "stm32mp15-u-boot.dtsi"
|
|
#include "stm32mp15-ddr3-dhsom-2x1Gb-1066-binG.dtsi"
|
|
#include "stm32mp15-ddr3-dhsom-2x2Gb-1066-binG.dtsi"
|
|
#include "stm32mp15-ddr3-dhsom-2x4Gb-1066-binG.dtsi"
|
|
|
|
/ {
|
|
aliases {
|
|
i2c1 = &i2c2;
|
|
i2c3 = &i2c4;
|
|
i2c4 = &i2c5;
|
|
mmc0 = &sdmmc1;
|
|
mmc1 = &sdmmc2;
|
|
spi0 = &qspi;
|
|
usb0 = &usbotg_hs;
|
|
eeprom0 = &eeprom0;
|
|
};
|
|
|
|
config {
|
|
u-boot,boot-led = "heartbeat";
|
|
u-boot,error-led = "error";
|
|
dh,som-coding-gpios = <&gpiof 12 0>, <&gpiof 13 0>, <&gpiof 15 0>;
|
|
dh,ddr3-coding-gpios = <&gpioz 6 0>, <&gpioz 7 0>;
|
|
};
|
|
};
|
|
|
|
ðernet0 {
|
|
phy-reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
|
|
/delete-property/ st,eth-ref-clk-sel;
|
|
};
|
|
|
|
ðernet0_rmii_pins_a {
|
|
pins1 {
|
|
pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
|
|
<STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */
|
|
<STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
|
|
<STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK */
|
|
<STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */
|
|
<STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */
|
|
};
|
|
};
|
|
|
|
&i2c4 {
|
|
bootph-all;
|
|
bootph-pre-ram;
|
|
|
|
eeprom0: eeprom@50 {
|
|
};
|
|
};
|
|
|
|
&i2c4_pins_a {
|
|
bootph-all;
|
|
pins {
|
|
bootph-all;
|
|
};
|
|
};
|
|
|
|
&phy0 {
|
|
/delete-property/ reset-gpios;
|
|
};
|
|
|
|
&pinctrl {
|
|
mco2_pins_a: mco2-0 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */
|
|
bias-disable;
|
|
drive-push-pull;
|
|
slew-rate = <2>;
|
|
};
|
|
};
|
|
|
|
mco2_sleep_pins_a: mco2-sleep-0 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('G', 2, ANALOG)>; /* MCO2 */
|
|
};
|
|
};
|
|
};
|
|
|
|
&pmic {
|
|
bootph-all;
|
|
bootph-pre-ram;
|
|
|
|
regulators {
|
|
bootph-pre-ram;
|
|
};
|
|
};
|
|
|
|
&flash0 {
|
|
bootph-pre-ram;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "fsbl1";
|
|
reg = <0x00000000 0x00040000>;
|
|
};
|
|
partition@40000 {
|
|
label = "fsbl2";
|
|
reg = <0x00040000 0x00040000>;
|
|
};
|
|
partition@500000 {
|
|
label = "uboot";
|
|
reg = <0x00080000 0x00160000>;
|
|
};
|
|
partition@900000 {
|
|
label = "env1";
|
|
reg = <0x001E0000 0x00010000>;
|
|
};
|
|
partition@980000 {
|
|
label = "env2";
|
|
reg = <0x001F0000 0x00010000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&qspi {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&qspi_clk_pins_a {
|
|
bootph-pre-ram;
|
|
pins {
|
|
bootph-pre-ram;
|
|
};
|
|
};
|
|
|
|
&qspi_bk1_pins_a {
|
|
bootph-pre-ram;
|
|
pins {
|
|
bootph-pre-ram;
|
|
};
|
|
};
|
|
|
|
&qspi_cs1_pins_a {
|
|
bootph-pre-ram;
|
|
pins {
|
|
bootph-pre-ram;
|
|
};
|
|
};
|
|
|
|
&rcc {
|
|
/*
|
|
* Reinstate clock names from stm32mp151.dtsi, the MCO2 trick
|
|
* used in stm32mp15xx-dhcom-som.dtsi is not supported by the
|
|
* U-Boot clock framework.
|
|
*/
|
|
clock-names = "hse", "hsi", "csi", "lse", "lsi";
|
|
clocks = <&clk_hse>, <&clk_hsi>, <&clk_csi>,
|
|
<&clk_lse>, <&clk_lsi>;
|
|
|
|
/* The MCO2 is already configured correctly, remove those. */
|
|
/delete-property/ assigned-clocks;
|
|
/delete-property/ assigned-clock-parents;
|
|
/delete-property/ assigned-clock-rates;
|
|
|
|
st,clksrc = <
|
|
CLK_MPU_PLL1P
|
|
CLK_AXI_PLL2P
|
|
CLK_MCU_PLL3P
|
|
CLK_PLL12_HSE
|
|
CLK_PLL3_HSE
|
|
CLK_PLL4_HSE
|
|
CLK_RTC_LSE
|
|
CLK_MCO1_DISABLED
|
|
CLK_MCO2_PLL4P
|
|
>;
|
|
|
|
st,clkdiv = <
|
|
1 /*MPU*/
|
|
0 /*AXI*/
|
|
0 /*MCU*/
|
|
1 /*APB1*/
|
|
1 /*APB2*/
|
|
1 /*APB3*/
|
|
1 /*APB4*/
|
|
2 /*APB5*/
|
|
23 /*RTC*/
|
|
0 /*MCO1*/
|
|
1 /*MCO2*/
|
|
>;
|
|
|
|
st,pkcs = <
|
|
CLK_CKPER_HSE
|
|
CLK_FMC_ACLK
|
|
CLK_QSPI_ACLK
|
|
CLK_ETH_PLL4P
|
|
CLK_SDMMC12_PLL4P
|
|
CLK_DSI_DSIPLL
|
|
CLK_STGEN_HSE
|
|
CLK_USBPHY_HSE
|
|
CLK_SPI2S1_PLL3Q
|
|
CLK_SPI2S23_PLL3Q
|
|
CLK_SPI45_HSI
|
|
CLK_SPI6_HSI
|
|
CLK_I2C46_HSI
|
|
CLK_SDMMC3_PLL4P
|
|
CLK_USBO_USBPHY
|
|
CLK_ADC_CKPER
|
|
CLK_CEC_LSE
|
|
CLK_I2C12_HSI
|
|
CLK_I2C35_HSI
|
|
CLK_UART1_HSI
|
|
CLK_UART24_HSI
|
|
CLK_UART35_HSI
|
|
CLK_UART6_HSI
|
|
CLK_UART78_HSI
|
|
CLK_SPDIF_PLL4P
|
|
CLK_FDCAN_PLL4R
|
|
CLK_SAI1_PLL3Q
|
|
CLK_SAI2_PLL3Q
|
|
CLK_SAI3_PLL3Q
|
|
CLK_SAI4_PLL3Q
|
|
CLK_RNG1_LSI
|
|
CLK_RNG2_LSI
|
|
CLK_LPTIM1_PCLK1
|
|
CLK_LPTIM23_PCLK3
|
|
CLK_LPTIM45_LSE
|
|
>;
|
|
|
|
/*
|
|
* cfg = < DIVM1 DIVN P Q R PQR(p,q,r) >;
|
|
* frac = < f >;
|
|
*
|
|
* PRQ(p,q,r) ... for p,q,r: 0-output disabled / 1-output enabled
|
|
* DIVN ... actually multiplier, but RCC_PLL1CFGR1 calls the field DIVN
|
|
* m ... for PLL1,2: m=2 ; for PLL3,4: m=1
|
|
* XTAL = 24 MHz
|
|
*
|
|
* VCO = ( XTAL / (DIVM1 + 1) ) * m * ( DIVN + 1 + ( f / 8192 ) )
|
|
* P = VCO / (P + 1)
|
|
* Q = VCO / (Q + 1)
|
|
* R = VCO / (R + 1)
|
|
*/
|
|
|
|
/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
|
|
pll2: st,pll@1 {
|
|
compatible = "st,stm32mp1-pll";
|
|
reg = <1>;
|
|
cfg = < 2 65 1 0 0 PQR(1,1,1) >;
|
|
frac = < 0x1400 >;
|
|
bootph-all;
|
|
};
|
|
|
|
/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
|
|
pll3: st,pll@2 {
|
|
compatible = "st,stm32mp1-pll";
|
|
reg = <2>;
|
|
cfg = < 1 33 1 16 36 PQR(1,1,1) >;
|
|
frac = < 0x1a04 >;
|
|
bootph-all;
|
|
};
|
|
|
|
/* VCO = 600.0 MHz => P = 100, Q = 50, R = 50 */
|
|
pll4: st,pll@3 {
|
|
compatible = "st,stm32mp1-pll";
|
|
reg = <3>;
|
|
cfg = < 1 49 5 11 11 PQR(1,1,1) >;
|
|
bootph-all;
|
|
};
|
|
};
|
|
|
|
&sdmmc1 {
|
|
bootph-pre-ram;
|
|
st,use-ckin;
|
|
st,cmd-gpios = <&gpiod 2 0>;
|
|
st,ck-gpios = <&gpioc 12 0>;
|
|
st,ckin-gpios = <&gpioe 4 0>;
|
|
};
|
|
|
|
&sdmmc1_b4_pins_a {
|
|
bootph-pre-ram;
|
|
pins1 {
|
|
bootph-pre-ram;
|
|
};
|
|
pins2 {
|
|
bootph-pre-ram;
|
|
};
|
|
};
|
|
|
|
&sdmmc1_dir_pins_a {
|
|
bootph-pre-ram;
|
|
pins1 {
|
|
bootph-pre-ram;
|
|
};
|
|
pins2 {
|
|
bootph-pre-ram;
|
|
};
|
|
};
|
|
|
|
&sdmmc2 {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&sdmmc2_b4_pins_a {
|
|
bootph-pre-ram;
|
|
pins {
|
|
bootph-pre-ram;
|
|
};
|
|
};
|
|
|
|
&sdmmc2_d47_pins_a {
|
|
bootph-pre-ram;
|
|
pins {
|
|
bootph-pre-ram;
|
|
};
|
|
};
|
|
|
|
&uart4 {
|
|
bootph-all;
|
|
};
|
|
|
|
&uart4_pins_a {
|
|
bootph-all;
|
|
pins1 {
|
|
bootph-all;
|
|
};
|
|
pins2 {
|
|
bootph-all;
|
|
/* pull-up on rx to avoid floating level */
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
®11 {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
®18 {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&usb33 {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&usbotg_hs_pins_a {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&usbotg_hs {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&usbphyc {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&usbphyc_port0 {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&usbphyc_port1 {
|
|
bootph-pre-ram;
|
|
};
|
|
|
|
&vdd_usb {
|
|
bootph-pre-ram;
|
|
};
|