u-boot/board/xilinx/zynqmp/zynqmp.c
Siva Durga Prasad Paladugu 12308b128f lib: fdtdec: Rename routine fdtdec_setup_memory_size()
This patch renames the routine fdtdec_setup_memory_size()
to fdtdec_setup_mem_size_base() as it now fills the
mem base as well along with size.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2018-07-19 10:49:56 +02:00

624 lines
12 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2014 - 2015 Xilinx, Inc.
* Michal Simek <michal.simek@xilinx.com>
*/
#include <common.h>
#include <sata.h>
#include <ahci.h>
#include <scsi.h>
#include <malloc.h>
#include <wdt.h>
#include <asm/arch/clk.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/psu_init_gpl.h>
#include <asm/io.h>
#include <dm/device.h>
#include <dm/uclass.h>
#include <usb.h>
#include <dwc3-uboot.h>
#include <zynqmppl.h>
#include <i2c.h>
#include <g_dnl.h>
DECLARE_GLOBAL_DATA_PTR;
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT)
static struct udevice *watchdog_dev;
#endif
#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
!defined(CONFIG_SPL_BUILD)
static xilinx_desc zynqmppl = XILINX_ZYNQMP_DESC;
static const struct {
u32 id;
u32 ver;
char *name;
bool evexists;
} zynqmp_devices[] = {
{
.id = 0x10,
.name = "3eg",
},
{
.id = 0x10,
.ver = 0x2c,
.name = "3cg",
},
{
.id = 0x11,
.name = "2eg",
},
{
.id = 0x11,
.ver = 0x2c,
.name = "2cg",
},
{
.id = 0x20,
.name = "5ev",
.evexists = 1,
},
{
.id = 0x20,
.ver = 0x100,
.name = "5eg",
.evexists = 1,
},
{
.id = 0x20,
.ver = 0x12c,
.name = "5cg",
},
{
.id = 0x21,
.name = "4ev",
.evexists = 1,
},
{
.id = 0x21,
.ver = 0x100,
.name = "4eg",
.evexists = 1,
},
{
.id = 0x21,
.ver = 0x12c,
.name = "4cg",
},
{
.id = 0x30,
.name = "7ev",
.evexists = 1,
},
{
.id = 0x30,
.ver = 0x100,
.name = "7eg",
.evexists = 1,
},
{
.id = 0x30,
.ver = 0x12c,
.name = "7cg",
},
{
.id = 0x38,
.name = "9eg",
},
{
.id = 0x38,
.ver = 0x2c,
.name = "9cg",
},
{
.id = 0x39,
.name = "6eg",
},
{
.id = 0x39,
.ver = 0x2c,
.name = "6cg",
},
{
.id = 0x40,
.name = "11eg",
},
{ /* For testing purpose only */
.id = 0x50,
.ver = 0x2c,
.name = "15cg",
},
{
.id = 0x50,
.name = "15eg",
},
{
.id = 0x58,
.name = "19eg",
},
{
.id = 0x59,
.name = "17eg",
},
{
.id = 0x61,
.name = "21dr",
},
{
.id = 0x63,
.name = "23dr",
},
{
.id = 0x65,
.name = "25dr",
},
{
.id = 0x64,
.name = "27dr",
},
{
.id = 0x60,
.name = "28dr",
},
{
.id = 0x62,
.name = "29dr",
},
};
#endif
int chip_id(unsigned char id)
{
struct pt_regs regs;
int val = -EINVAL;
if (current_el() != 3) {
regs.regs[0] = ZYNQMP_SIP_SVC_CSU_DMA_CHIPID;
regs.regs[1] = 0;
regs.regs[2] = 0;
regs.regs[3] = 0;
smc_call(&regs);
/*
* SMC returns:
* regs[0][31:0] = status of the operation
* regs[0][63:32] = CSU.IDCODE register
* regs[1][31:0] = CSU.version register
* regs[1][63:32] = CSU.IDCODE2 register
*/
switch (id) {
case IDCODE:
regs.regs[0] = upper_32_bits(regs.regs[0]);
regs.regs[0] &= ZYNQMP_CSU_IDCODE_DEVICE_CODE_MASK |
ZYNQMP_CSU_IDCODE_SVD_MASK;
regs.regs[0] >>= ZYNQMP_CSU_IDCODE_SVD_SHIFT;
val = regs.regs[0];
break;
case VERSION:
regs.regs[1] = lower_32_bits(regs.regs[1]);
regs.regs[1] &= ZYNQMP_CSU_SILICON_VER_MASK;
val = regs.regs[1];
break;
case IDCODE2:
regs.regs[1] = lower_32_bits(regs.regs[1]);
regs.regs[1] >>= ZYNQMP_CSU_VERSION_EMPTY_SHIFT;
val = regs.regs[1];
break;
default:
printf("%s, Invalid Req:0x%x\n", __func__, id);
}
} else {
switch (id) {
case IDCODE:
val = readl(ZYNQMP_CSU_IDCODE_ADDR);
val &= ZYNQMP_CSU_IDCODE_DEVICE_CODE_MASK |
ZYNQMP_CSU_IDCODE_SVD_MASK;
val >>= ZYNQMP_CSU_IDCODE_SVD_SHIFT;
break;
case VERSION:
val = readl(ZYNQMP_CSU_VER_ADDR);
val &= ZYNQMP_CSU_SILICON_VER_MASK;
break;
default:
printf("%s, Invalid Req:0x%x\n", __func__, id);
}
}
return val;
}
#define ZYNQMP_VERSION_SIZE 9
#define ZYNQMP_PL_STATUS_BIT 9
#define ZYNQMP_PL_STATUS_MASK BIT(ZYNQMP_PL_STATUS_BIT)
#define ZYNQMP_CSU_VERSION_MASK ~(ZYNQMP_PL_STATUS_MASK)
#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
!defined(CONFIG_SPL_BUILD)
static char *zynqmp_get_silicon_idcode_name(void)
{
u32 i, id, ver;
char *buf;
static char name[ZYNQMP_VERSION_SIZE];
id = chip_id(IDCODE);
ver = chip_id(IDCODE2);
for (i = 0; i < ARRAY_SIZE(zynqmp_devices); i++) {
if ((zynqmp_devices[i].id == id) &&
(zynqmp_devices[i].ver == (ver &
ZYNQMP_CSU_VERSION_MASK))) {
strncat(name, "zu", 2);
strncat(name, zynqmp_devices[i].name,
ZYNQMP_VERSION_SIZE - 3);
break;
}
}
if (i >= ARRAY_SIZE(zynqmp_devices))
return "unknown";
if (!zynqmp_devices[i].evexists)
return name;
if (ver & ZYNQMP_PL_STATUS_MASK)
return name;
if (strstr(name, "eg") || strstr(name, "ev")) {
buf = strstr(name, "e");
*buf = '\0';
}
return name;
}
#endif
int board_early_init_f(void)
{
int ret = 0;
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_CLK_ZYNQMP)
zynqmp_pmufw_version();
#endif
#if defined(CONFIG_ZYNQMP_PSU_INIT_ENABLED)
ret = psu_init();
#endif
#if defined(CONFIG_WDT) && !defined(CONFIG_SPL_BUILD)
/* bss is not cleared at time when watchdog_reset() is called */
watchdog_dev = NULL;
#endif
return ret;
}
int board_init(void)
{
printf("EL Level:\tEL%d\n", current_el());
#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
!defined(CONFIG_SPL_BUILD) || (defined(CONFIG_SPL_FPGA_SUPPORT) && \
defined(CONFIG_SPL_BUILD))
if (current_el() != 3) {
zynqmppl.name = zynqmp_get_silicon_idcode_name();
printf("Chip ID:\t%s\n", zynqmppl.name);
fpga_init();
fpga_add(fpga_xilinx, &zynqmppl);
}
#endif
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT)
if (uclass_get_device_by_seq(UCLASS_WDT, 0, &watchdog_dev)) {
debug("Watchdog: Not found by seq!\n");
if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) {
puts("Watchdog: Not found!\n");
return 0;
}
}
wdt_start(watchdog_dev, 0, 0);
puts("Watchdog: Started\n");
#endif
return 0;
}
#ifdef CONFIG_WATCHDOG
/* Called by macro WATCHDOG_RESET */
void watchdog_reset(void)
{
# if !defined(CONFIG_SPL_BUILD)
static ulong next_reset;
ulong now;
if (!watchdog_dev)
return;
now = timer_get_us();
/* Do not reset the watchdog too often */
if (now > next_reset) {
wdt_reset(watchdog_dev);
next_reset = now + 1000;
}
# endif
}
#endif
int board_early_init_r(void)
{
u32 val;
if (current_el() != 3)
return 0;
val = readl(&crlapb_base->timestamp_ref_ctrl);
val &= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT;
if (!val) {
val = readl(&crlapb_base->timestamp_ref_ctrl);
val |= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT;
writel(val, &crlapb_base->timestamp_ref_ctrl);
/* Program freq register in System counter */
writel(zynqmp_get_system_timer_freq(),
&iou_scntr_secure->base_frequency_id_register);
/* And enable system counter */
writel(ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN,
&iou_scntr_secure->counter_control_register);
}
return 0;
}
int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
{
#if defined(CONFIG_ZYNQ_GEM_EEPROM_ADDR) && \
defined(CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET) && \
defined(CONFIG_ZYNQ_EEPROM_BUS)
i2c_set_bus_num(CONFIG_ZYNQ_EEPROM_BUS);
if (eeprom_read(CONFIG_ZYNQ_GEM_EEPROM_ADDR,
CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET,
ethaddr, 6))
printf("I2C EEPROM MAC address read failed\n");
#endif
return 0;
}
unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc,
char * const argv[])
{
int ret = 0;
if (current_el() > 1) {
smp_kick_all_cpus();
dcache_disable();
armv8_switch_to_el1(0x0, 0, 0, 0, (unsigned long)entry,
ES_TO_AARCH64);
} else {
printf("FAIL: current EL is not above EL1\n");
ret = EINVAL;
}
return ret;
}
#if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
int dram_init_banksize(void)
{
int ret;
ret = fdtdec_setup_memory_banksize();
if (ret)
return ret;
mem_map_fill();
return 0;
}
int dram_init(void)
{
if (fdtdec_setup_mem_size_base() != 0)
return -EINVAL;
return 0;
}
#else
int dram_init_banksize(void)
{
#if defined(CONFIG_NR_DRAM_BANKS)
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_dram[0].size = get_effective_memsize();
#endif
mem_map_fill();
return 0;
}
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_SYS_SDRAM_SIZE);
return 0;
}
#endif
void reset_cpu(ulong addr)
{
}
static const struct {
u32 bit;
const char *name;
} reset_reasons[] = {
{ RESET_REASON_DEBUG_SYS, "DEBUG" },
{ RESET_REASON_SOFT, "SOFT" },
{ RESET_REASON_SRST, "SRST" },
{ RESET_REASON_PSONLY, "PS-ONLY" },
{ RESET_REASON_PMU, "PMU" },
{ RESET_REASON_INTERNAL, "INTERNAL" },
{ RESET_REASON_EXTERNAL, "EXTERNAL" },
{}
};
static u32 reset_reason(void)
{
u32 ret;
int i;
const char *reason = NULL;
ret = readl(&crlapb_base->reset_reason);
puts("Reset reason:\t");
for (i = 0; i < ARRAY_SIZE(reset_reasons); i++) {
if (ret & reset_reasons[i].bit) {
reason = reset_reasons[i].name;
printf("%s ", reset_reasons[i].name);
break;
}
}
puts("\n");
env_set("reset_reason", reason);
writel(~0, &crlapb_base->reset_reason);
return ret;
}
int board_late_init(void)
{
u32 reg = 0;
u8 bootmode;
struct udevice *dev;
int bootseq = -1;
int bootseq_len = 0;
int env_targets_len = 0;
const char *mode;
char *new_targets;
char *env_targets;
int ret;
if (!(gd->flags & GD_FLG_ENV_DEFAULT)) {
debug("Saved variables - Skipping\n");
return 0;
}
ret = zynqmp_mmio_read((ulong)&crlapb_base->boot_mode, &reg);
if (ret)
return -EINVAL;
if (reg >> BOOT_MODE_ALT_SHIFT)
reg >>= BOOT_MODE_ALT_SHIFT;
bootmode = reg & BOOT_MODES_MASK;
puts("Bootmode: ");
switch (bootmode) {
case USB_MODE:
puts("USB_MODE\n");
mode = "usb";
env_set("modeboot", "usb_dfu_spl");
break;
case JTAG_MODE:
puts("JTAG_MODE\n");
mode = "pxe dhcp";
env_set("modeboot", "jtagboot");
break;
case QSPI_MODE_24BIT:
case QSPI_MODE_32BIT:
mode = "qspi0";
puts("QSPI_MODE\n");
env_set("modeboot", "qspiboot");
break;
case EMMC_MODE:
puts("EMMC_MODE\n");
mode = "mmc0";
env_set("modeboot", "emmcboot");
break;
case SD_MODE:
puts("SD_MODE\n");
if (uclass_get_device_by_name(UCLASS_MMC,
"sdhci@ff160000", &dev)) {
puts("Boot from SD0 but without SD0 enabled!\n");
return -1;
}
debug("mmc0 device found at %p, seq %d\n", dev, dev->seq);
mode = "mmc";
bootseq = dev->seq;
env_set("modeboot", "sdboot");
break;
case SD1_LSHFT_MODE:
puts("LVL_SHFT_");
/* fall through */
case SD_MODE1:
puts("SD_MODE1\n");
if (uclass_get_device_by_name(UCLASS_MMC,
"sdhci@ff170000", &dev)) {
puts("Boot from SD1 but without SD1 enabled!\n");
return -1;
}
debug("mmc1 device found at %p, seq %d\n", dev, dev->seq);
mode = "mmc";
bootseq = dev->seq;
env_set("modeboot", "sdboot");
break;
case NAND_MODE:
puts("NAND_MODE\n");
mode = "nand0";
env_set("modeboot", "nandboot");
break;
default:
mode = "";
printf("Invalid Boot Mode:0x%x\n", bootmode);
break;
}
if (bootseq >= 0) {
bootseq_len = snprintf(NULL, 0, "%i", bootseq);
debug("Bootseq len: %x\n", bootseq_len);
}
/*
* One terminating char + one byte for space between mode
* and default boot_targets
*/
env_targets = env_get("boot_targets");
if (env_targets)
env_targets_len = strlen(env_targets);
new_targets = calloc(1, strlen(mode) + env_targets_len + 2 +
bootseq_len);
if (!new_targets)
return -ENOMEM;
if (bootseq >= 0)
sprintf(new_targets, "%s%x %s", mode, bootseq,
env_targets ? env_targets : "");
else
sprintf(new_targets, "%s %s", mode,
env_targets ? env_targets : "");
env_set("boot_targets", new_targets);
reset_reason();
return 0;
}
int checkboard(void)
{
puts("Board: Xilinx ZynqMP\n");
return 0;
}