u-boot/board/renesas/rsk7203/rsk7203.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

59 lines
1.3 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2008 Nobuhiro Iwamatsu
* Copyright (C) 2008 Renesas Solutions Corp.
*
* u-boot/board/rsk7203/rsk7203.c
*/
#include <common.h>
#include <net.h>
#include <netdev.h>
#include <asm/io.h>
#include <asm/processor.h>
int checkboard(void)
{
puts("BOARD: Renesas Technology RSK7203\n");
return 0;
}
int board_init(void)
{
return 0;
}
void led_set_state(unsigned short value)
{
}
/*
* The RSK board has the SMSC9118 wired up 'incorrectly'.
* Byte-swapping is necessary, and so poor performance is inevitable.
* This problem cannot evade by the swap function of CHIP, this can
* evade by software Byte-swapping.
* And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
* functions necessary to solve this problem.
*/
u32 pkt_data_pull(struct eth_device *dev, u32 addr)
{
volatile u16 *addr_16 = (u16 *)(dev->iobase + addr);
return (u32)((swab16(*addr_16) << 16) & 0xFFFF0000)\
| swab16(*(addr_16 + 1));
}
void pkt_data_push(struct eth_device *dev, u32 addr, u32 val)
{
addr += dev->iobase;
*(volatile u16 *)(addr + 2) = swab16((u16)val);
*(volatile u16 *)(addr) = swab16((u16)(val >> 16));
}
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_SMC911X
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
#endif
return rc;
}