mirror of
https://github.com/AsahiLinux/u-boot
synced 2025-03-01 22:07:21 +00:00
73c7db73e8
PCIe Mini CEM 2.1 spec added support for USB3.0 mode on MiniPCIe cards. USB3.0 and PCIe share same pins and only one function can be active at the same time. PCIe Mini CEM 2.1 spec says that determining function is platform specific and spec does not define any dedicated pin which could say if card is USB3.0-based or PCIe-based. Implement this platform specific decision (USB3.0 vs PCIe) for WWAN MiniPCIe slot on Turris Omnia via U-Boot env variable "omnia_wwan_slot", similarly like is implemented forced mode for MiniPCIe/mSATA slot via "omnia_msata_slot" env variable. Value "usb3" for "omnia_wwan_slot" would mean to set USB3.0 mode and value "pcie" original PCIe mode. A385 SoC on Turris Omnia has configurable fifth SerDes line (exported to MiniPCIe WWAN slot with SIM card) either to USB3.0 or PCIe functionality, so implementation of this new PCIe Mini CEM 2.1 feature is simple, by just configuring SerDes to USB 3.0 mode. Other twos MiniPCIe slots on Turris Omnia do not have this new functionality as their SerDes lines cannot be switched to USB3.0 functionality. Note that A385 SoC does not have too many USB3.0 blocks, so activating USB3.0 in MiniPCIe cause that one external USB3.0 USB-A port would loose USB3.0 functionality and would be downgraded just to USB2.0. By default this MiniPCIe WWAN slot is in PCIe mode, like before. To set this MiniPCIe WWAN slot to USB3.0 mode, call U-Boot commands: => setenv omnia_wwan_slot usb3 => saveenv => reset Signed-off-by: Pali Rohár <pali@kernel.org> |
||
|---|---|---|
| .. | ||
| MAINTAINERS | ||
| Makefile | ||
| turris_omnia.c | ||