mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-16 16:23:14 +00:00
401d1c4f5d
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
822 lines
21 KiB
C
822 lines
21 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <cpu_func.h>
|
|
#include <asm/global_data.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/log2.h>
|
|
#include <asm/arcregs.h>
|
|
#include <asm/arc-bcr.h>
|
|
#include <asm/cache.h>
|
|
|
|
/*
|
|
* [ NOTE 1 ]:
|
|
* Data cache (L1 D$ or SL$) entire invalidate operation or data cache disable
|
|
* operation may result in unexpected behavior and data loss even if we flush
|
|
* data cache right before invalidation. That may happens if we store any context
|
|
* on stack (like we store BLINK register on stack before function call).
|
|
* BLINK register is the register where return address is automatically saved
|
|
* when we do function call with instructions like 'bl'.
|
|
*
|
|
* There is the real example:
|
|
* We may hang in the next code as we store any BLINK register on stack in
|
|
* invalidate_dcache_all() function.
|
|
*
|
|
* void flush_dcache_all() {
|
|
* __dc_entire_op(OP_FLUSH);
|
|
* // Other code //
|
|
* }
|
|
*
|
|
* void invalidate_dcache_all() {
|
|
* __dc_entire_op(OP_INV);
|
|
* // Other code //
|
|
* }
|
|
*
|
|
* void foo(void) {
|
|
* flush_dcache_all();
|
|
* invalidate_dcache_all();
|
|
* }
|
|
*
|
|
* Now let's see what really happens during that code execution:
|
|
*
|
|
* foo()
|
|
* |->> call flush_dcache_all
|
|
* [return address is saved to BLINK register]
|
|
* [push BLINK] (save to stack) ![point 1]
|
|
* |->> call __dc_entire_op(OP_FLUSH)
|
|
* [return address is saved to BLINK register]
|
|
* [flush L1 D$]
|
|
* return [jump to BLINK]
|
|
* <<------
|
|
* [other flush_dcache_all code]
|
|
* [pop BLINK] (get from stack)
|
|
* return [jump to BLINK]
|
|
* <<------
|
|
* |->> call invalidate_dcache_all
|
|
* [return address is saved to BLINK register]
|
|
* [push BLINK] (save to stack) ![point 2]
|
|
* |->> call __dc_entire_op(OP_FLUSH)
|
|
* [return address is saved to BLINK register]
|
|
* [invalidate L1 D$] ![point 3]
|
|
* // Oops!!!
|
|
* // We lose return address from invalidate_dcache_all function:
|
|
* // we save it to stack and invalidate L1 D$ after that!
|
|
* return [jump to BLINK]
|
|
* <<------
|
|
* [other invalidate_dcache_all code]
|
|
* [pop BLINK] (get from stack)
|
|
* // we don't have this data in L1 dcache as we invalidated it in [point 3]
|
|
* // so we get it from next memory level (for example DDR memory)
|
|
* // but in the memory we have value which we save in [point 1], which
|
|
* // is return address from flush_dcache_all function (instead of
|
|
* // address from current invalidate_dcache_all function which we
|
|
* // saved in [point 2] !)
|
|
* return [jump to BLINK]
|
|
* <<------
|
|
* // As BLINK points to invalidate_dcache_all, we call it again and
|
|
* // loop forever.
|
|
*
|
|
* Fortunately we may fix that by using flush & invalidation of D$ with a single
|
|
* one instruction (instead of flush and invalidation instructions pair) and
|
|
* enabling force function inline with '__attribute__((always_inline))' gcc
|
|
* attribute to avoid any function call (and BLINK store) between cache flush
|
|
* and disable.
|
|
*
|
|
*
|
|
* [ NOTE 2 ]:
|
|
* As of today we only support the following cache configurations on ARC.
|
|
* Other configurations may exist in HW but we don't support it in SW.
|
|
* Configuration 1:
|
|
* ______________________
|
|
* | |
|
|
* | ARC CPU |
|
|
* |______________________|
|
|
* ___|___ ___|___
|
|
* | | | |
|
|
* | L1 I$ | | L1 D$ |
|
|
* |_______| |_______|
|
|
* on/off on/off
|
|
* ___|______________|____
|
|
* | |
|
|
* | main memory |
|
|
* |______________________|
|
|
*
|
|
* Configuration 2:
|
|
* ______________________
|
|
* | |
|
|
* | ARC CPU |
|
|
* |______________________|
|
|
* ___|___ ___|___
|
|
* | | | |
|
|
* | L1 I$ | | L1 D$ |
|
|
* |_______| |_______|
|
|
* on/off on/off
|
|
* ___|______________|____
|
|
* | |
|
|
* | L2 (SL$) |
|
|
* |______________________|
|
|
* always on (ARCv2, HS < 3.0)
|
|
* on/off (ARCv2, HS >= 3.0)
|
|
* ___|______________|____
|
|
* | |
|
|
* | main memory |
|
|
* |______________________|
|
|
*
|
|
* Configuration 3:
|
|
* ______________________
|
|
* | |
|
|
* | ARC CPU |
|
|
* |______________________|
|
|
* ___|___ ___|___
|
|
* | | | |
|
|
* | L1 I$ | | L1 D$ |
|
|
* |_______| |_______|
|
|
* on/off must be on
|
|
* ___|______________|____ _______
|
|
* | | | |
|
|
* | L2 (SL$) |-----| IOC |
|
|
* |______________________| |_______|
|
|
* always must be on on/off
|
|
* ___|______________|____
|
|
* | |
|
|
* | main memory |
|
|
* |______________________|
|
|
*/
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* Bit values in IC_CTRL */
|
|
#define IC_CTRL_CACHE_DISABLE BIT(0)
|
|
|
|
/* Bit values in DC_CTRL */
|
|
#define DC_CTRL_CACHE_DISABLE BIT(0)
|
|
#define DC_CTRL_INV_MODE_FLUSH BIT(6)
|
|
#define DC_CTRL_FLUSH_STATUS BIT(8)
|
|
|
|
#define OP_INV BIT(0)
|
|
#define OP_FLUSH BIT(1)
|
|
#define OP_FLUSH_N_INV (OP_FLUSH | OP_INV)
|
|
|
|
/* Bit val in SLC_CONTROL */
|
|
#define SLC_CTRL_DIS 0x001
|
|
#define SLC_CTRL_IM 0x040
|
|
#define SLC_CTRL_BUSY 0x100
|
|
#define SLC_CTRL_RGN_OP_INV 0x200
|
|
|
|
#define CACHE_LINE_MASK (~(gd->arch.l1_line_sz - 1))
|
|
|
|
/*
|
|
* We don't want to use '__always_inline' macro here as it can be redefined
|
|
* to simple 'inline' in some cases which breaks stuff. See [ NOTE 1 ] for more
|
|
* details about the reasons we need to use always_inline functions.
|
|
*/
|
|
#define inlined_cachefunc inline __attribute__((always_inline))
|
|
|
|
static inlined_cachefunc void __ic_entire_invalidate(void);
|
|
static inlined_cachefunc void __dc_entire_op(const int cacheop);
|
|
static inlined_cachefunc void __slc_entire_op(const int op);
|
|
static inlined_cachefunc bool ioc_enabled(void);
|
|
|
|
static inline bool pae_exists(void)
|
|
{
|
|
/* TODO: should we compare mmu version from BCR and from CONFIG? */
|
|
#if (CONFIG_ARC_MMU_VER >= 4)
|
|
union bcr_mmu_4 mmu4;
|
|
|
|
mmu4.word = read_aux_reg(ARC_AUX_MMU_BCR);
|
|
|
|
if (mmu4.fields.pae)
|
|
return true;
|
|
#endif /* (CONFIG_ARC_MMU_VER >= 4) */
|
|
|
|
return false;
|
|
}
|
|
|
|
static inlined_cachefunc bool icache_exists(void)
|
|
{
|
|
union bcr_di_cache ibcr;
|
|
|
|
ibcr.word = read_aux_reg(ARC_BCR_IC_BUILD);
|
|
return !!ibcr.fields.ver;
|
|
}
|
|
|
|
static inlined_cachefunc bool icache_enabled(void)
|
|
{
|
|
if (!icache_exists())
|
|
return false;
|
|
|
|
return !(read_aux_reg(ARC_AUX_IC_CTRL) & IC_CTRL_CACHE_DISABLE);
|
|
}
|
|
|
|
static inlined_cachefunc bool dcache_exists(void)
|
|
{
|
|
union bcr_di_cache dbcr;
|
|
|
|
dbcr.word = read_aux_reg(ARC_BCR_DC_BUILD);
|
|
return !!dbcr.fields.ver;
|
|
}
|
|
|
|
static inlined_cachefunc bool dcache_enabled(void)
|
|
{
|
|
if (!dcache_exists())
|
|
return false;
|
|
|
|
return !(read_aux_reg(ARC_AUX_DC_CTRL) & DC_CTRL_CACHE_DISABLE);
|
|
}
|
|
|
|
static inlined_cachefunc bool slc_exists(void)
|
|
{
|
|
if (is_isa_arcv2()) {
|
|
union bcr_generic sbcr;
|
|
|
|
sbcr.word = read_aux_reg(ARC_BCR_SLC);
|
|
return !!sbcr.fields.ver;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
enum slc_dis_status {
|
|
ST_SLC_MISSING = 0,
|
|
ST_SLC_NO_DISABLE_CTRL,
|
|
ST_SLC_DISABLE_CTRL
|
|
};
|
|
|
|
/*
|
|
* ARCv1 -> ST_SLC_MISSING
|
|
* ARCv2 && SLC absent -> ST_SLC_MISSING
|
|
* ARCv2 && SLC exists && SLC version <= 2 -> ST_SLC_NO_DISABLE_CTRL
|
|
* ARCv2 && SLC exists && SLC version > 2 -> ST_SLC_DISABLE_CTRL
|
|
*/
|
|
static inlined_cachefunc enum slc_dis_status slc_disable_supported(void)
|
|
{
|
|
if (is_isa_arcv2()) {
|
|
union bcr_generic sbcr;
|
|
|
|
sbcr.word = read_aux_reg(ARC_BCR_SLC);
|
|
if (sbcr.fields.ver == 0)
|
|
return ST_SLC_MISSING;
|
|
else if (sbcr.fields.ver <= 2)
|
|
return ST_SLC_NO_DISABLE_CTRL;
|
|
else
|
|
return ST_SLC_DISABLE_CTRL;
|
|
}
|
|
|
|
return ST_SLC_MISSING;
|
|
}
|
|
|
|
static inlined_cachefunc bool __slc_enabled(void)
|
|
{
|
|
return !(read_aux_reg(ARC_AUX_SLC_CTRL) & SLC_CTRL_DIS);
|
|
}
|
|
|
|
static inlined_cachefunc void __slc_enable(void)
|
|
{
|
|
unsigned int ctrl;
|
|
|
|
ctrl = read_aux_reg(ARC_AUX_SLC_CTRL);
|
|
ctrl &= ~SLC_CTRL_DIS;
|
|
write_aux_reg(ARC_AUX_SLC_CTRL, ctrl);
|
|
}
|
|
|
|
static inlined_cachefunc void __slc_disable(void)
|
|
{
|
|
unsigned int ctrl;
|
|
|
|
ctrl = read_aux_reg(ARC_AUX_SLC_CTRL);
|
|
ctrl |= SLC_CTRL_DIS;
|
|
write_aux_reg(ARC_AUX_SLC_CTRL, ctrl);
|
|
}
|
|
|
|
static inlined_cachefunc bool slc_enabled(void)
|
|
{
|
|
enum slc_dis_status slc_status = slc_disable_supported();
|
|
|
|
if (slc_status == ST_SLC_MISSING)
|
|
return false;
|
|
else if (slc_status == ST_SLC_NO_DISABLE_CTRL)
|
|
return true;
|
|
else
|
|
return __slc_enabled();
|
|
}
|
|
|
|
static inlined_cachefunc bool slc_data_bypass(void)
|
|
{
|
|
/*
|
|
* If L1 data cache is disabled SL$ is bypassed and all load/store
|
|
* requests are sent directly to main memory.
|
|
*/
|
|
return !dcache_enabled();
|
|
}
|
|
|
|
void slc_enable(void)
|
|
{
|
|
if (slc_disable_supported() != ST_SLC_DISABLE_CTRL)
|
|
return;
|
|
|
|
if (__slc_enabled())
|
|
return;
|
|
|
|
__slc_enable();
|
|
}
|
|
|
|
/* TODO: warn if we are not able to disable SLC */
|
|
void slc_disable(void)
|
|
{
|
|
if (slc_disable_supported() != ST_SLC_DISABLE_CTRL)
|
|
return;
|
|
|
|
/* we don't support SLC disabling if we use IOC */
|
|
if (ioc_enabled())
|
|
return;
|
|
|
|
if (!__slc_enabled())
|
|
return;
|
|
|
|
/*
|
|
* We need to flush L1D$ to guarantee that we won't have any
|
|
* writeback operations during SLC disabling.
|
|
*/
|
|
__dc_entire_op(OP_FLUSH);
|
|
__slc_entire_op(OP_FLUSH_N_INV);
|
|
__slc_disable();
|
|
}
|
|
|
|
static inlined_cachefunc bool ioc_exists(void)
|
|
{
|
|
if (is_isa_arcv2()) {
|
|
union bcr_clust_cfg cbcr;
|
|
|
|
cbcr.word = read_aux_reg(ARC_BCR_CLUSTER);
|
|
return cbcr.fields.c;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static inlined_cachefunc bool ioc_enabled(void)
|
|
{
|
|
/*
|
|
* We check only CONFIG option instead of IOC HW state check as IOC
|
|
* must be disabled by default.
|
|
*/
|
|
if (is_ioc_enabled())
|
|
return ioc_exists();
|
|
|
|
return false;
|
|
}
|
|
|
|
static inlined_cachefunc void __slc_entire_op(const int op)
|
|
{
|
|
unsigned int ctrl;
|
|
|
|
if (!slc_enabled())
|
|
return;
|
|
|
|
ctrl = read_aux_reg(ARC_AUX_SLC_CTRL);
|
|
|
|
if (!(op & OP_FLUSH)) /* i.e. OP_INV */
|
|
ctrl &= ~SLC_CTRL_IM; /* clear IM: Disable flush before Inv */
|
|
else
|
|
ctrl |= SLC_CTRL_IM;
|
|
|
|
write_aux_reg(ARC_AUX_SLC_CTRL, ctrl);
|
|
|
|
if (op & OP_INV) /* Inv or flush-n-inv use same cmd reg */
|
|
write_aux_reg(ARC_AUX_SLC_INVALIDATE, 0x1);
|
|
else
|
|
write_aux_reg(ARC_AUX_SLC_FLUSH, 0x1);
|
|
|
|
/* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */
|
|
read_aux_reg(ARC_AUX_SLC_CTRL);
|
|
|
|
/* Important to wait for flush to complete */
|
|
while (read_aux_reg(ARC_AUX_SLC_CTRL) & SLC_CTRL_BUSY);
|
|
}
|
|
|
|
static void slc_upper_region_init(void)
|
|
{
|
|
/*
|
|
* ARC_AUX_SLC_RGN_START1 and ARC_AUX_SLC_RGN_END1 register exist
|
|
* only if PAE exists in current HW. So we had to check pae_exist
|
|
* before using them.
|
|
*/
|
|
if (!pae_exists())
|
|
return;
|
|
|
|
/*
|
|
* ARC_AUX_SLC_RGN_END1 and ARC_AUX_SLC_RGN_START1 are always == 0
|
|
* as we don't use PAE40.
|
|
*/
|
|
write_aux_reg(ARC_AUX_SLC_RGN_END1, 0);
|
|
write_aux_reg(ARC_AUX_SLC_RGN_START1, 0);
|
|
}
|
|
|
|
static void __slc_rgn_op(unsigned long paddr, unsigned long sz, const int op)
|
|
{
|
|
#ifdef CONFIG_ISA_ARCV2
|
|
|
|
unsigned int ctrl;
|
|
unsigned long end;
|
|
|
|
if (!slc_enabled())
|
|
return;
|
|
|
|
/*
|
|
* The Region Flush operation is specified by CTRL.RGN_OP[11..9]
|
|
* - b'000 (default) is Flush,
|
|
* - b'001 is Invalidate if CTRL.IM == 0
|
|
* - b'001 is Flush-n-Invalidate if CTRL.IM == 1
|
|
*/
|
|
ctrl = read_aux_reg(ARC_AUX_SLC_CTRL);
|
|
|
|
/* Don't rely on default value of IM bit */
|
|
if (!(op & OP_FLUSH)) /* i.e. OP_INV */
|
|
ctrl &= ~SLC_CTRL_IM; /* clear IM: Disable flush before Inv */
|
|
else
|
|
ctrl |= SLC_CTRL_IM;
|
|
|
|
if (op & OP_INV)
|
|
ctrl |= SLC_CTRL_RGN_OP_INV; /* Inv or flush-n-inv */
|
|
else
|
|
ctrl &= ~SLC_CTRL_RGN_OP_INV;
|
|
|
|
write_aux_reg(ARC_AUX_SLC_CTRL, ctrl);
|
|
|
|
/*
|
|
* Lower bits are ignored, no need to clip
|
|
* END needs to be setup before START (latter triggers the operation)
|
|
* END can't be same as START, so add (l2_line_sz - 1) to sz
|
|
*/
|
|
end = paddr + sz + gd->arch.slc_line_sz - 1;
|
|
|
|
/*
|
|
* Upper addresses (ARC_AUX_SLC_RGN_END1 and ARC_AUX_SLC_RGN_START1)
|
|
* are always == 0 as we don't use PAE40, so we only setup lower ones
|
|
* (ARC_AUX_SLC_RGN_END and ARC_AUX_SLC_RGN_START)
|
|
*/
|
|
write_aux_reg(ARC_AUX_SLC_RGN_END, end);
|
|
write_aux_reg(ARC_AUX_SLC_RGN_START, paddr);
|
|
|
|
/* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */
|
|
read_aux_reg(ARC_AUX_SLC_CTRL);
|
|
|
|
while (read_aux_reg(ARC_AUX_SLC_CTRL) & SLC_CTRL_BUSY);
|
|
|
|
#endif /* CONFIG_ISA_ARCV2 */
|
|
}
|
|
|
|
static void arc_ioc_setup(void)
|
|
{
|
|
/* IOC Aperture start is equal to DDR start */
|
|
unsigned int ap_base = CONFIG_SYS_SDRAM_BASE;
|
|
/* IOC Aperture size is equal to DDR size */
|
|
long ap_size = CONFIG_SYS_SDRAM_SIZE;
|
|
|
|
/* Unsupported configuration. See [ NOTE 2 ] for more details. */
|
|
if (!slc_exists())
|
|
panic("Try to enable IOC but SLC is not present");
|
|
|
|
if (!slc_enabled())
|
|
panic("Try to enable IOC but SLC is disabled");
|
|
|
|
/* Unsupported configuration. See [ NOTE 2 ] for more details. */
|
|
if (!dcache_enabled())
|
|
panic("Try to enable IOC but L1 D$ is disabled");
|
|
|
|
if (!is_power_of_2(ap_size) || ap_size < 4096)
|
|
panic("IOC Aperture size must be power of 2 and bigger 4Kib");
|
|
|
|
/* IOC Aperture start must be aligned to the size of the aperture */
|
|
if (ap_base % ap_size != 0)
|
|
panic("IOC Aperture start must be aligned to the size of the aperture");
|
|
|
|
flush_n_invalidate_dcache_all();
|
|
|
|
/*
|
|
* IOC Aperture size decoded as 2 ^ (SIZE + 2) KB,
|
|
* so setting 0x11 implies 512M, 0x12 implies 1G...
|
|
*/
|
|
write_aux_reg(ARC_AUX_IO_COH_AP0_SIZE,
|
|
order_base_2(ap_size / 1024) - 2);
|
|
|
|
write_aux_reg(ARC_AUX_IO_COH_AP0_BASE, ap_base >> 12);
|
|
write_aux_reg(ARC_AUX_IO_COH_PARTIAL, 1);
|
|
write_aux_reg(ARC_AUX_IO_COH_ENABLE, 1);
|
|
}
|
|
|
|
static void read_decode_cache_bcr_arcv2(void)
|
|
{
|
|
#ifdef CONFIG_ISA_ARCV2
|
|
|
|
union bcr_slc_cfg slc_cfg;
|
|
|
|
if (slc_exists()) {
|
|
slc_cfg.word = read_aux_reg(ARC_AUX_SLC_CONFIG);
|
|
gd->arch.slc_line_sz = (slc_cfg.fields.lsz == 0) ? 128 : 64;
|
|
|
|
/*
|
|
* We don't support configuration where L1 I$ or L1 D$ is
|
|
* absent but SL$ exists. See [ NOTE 2 ] for more details.
|
|
*/
|
|
if (!icache_exists() || !dcache_exists())
|
|
panic("Unsupported cache configuration: SLC exists but one of L1 caches is absent");
|
|
}
|
|
|
|
#endif /* CONFIG_ISA_ARCV2 */
|
|
}
|
|
|
|
void read_decode_cache_bcr(void)
|
|
{
|
|
int dc_line_sz = 0, ic_line_sz = 0;
|
|
union bcr_di_cache ibcr, dbcr;
|
|
|
|
/*
|
|
* We don't care much about I$ line length really as there're
|
|
* no per-line ops on I$ instead we only do full invalidation of it
|
|
* on occasion of relocation and right before jumping to the OS.
|
|
* Still we check insane config with zero-encoded line length in
|
|
* presense of version field in I$ BCR. Just in case.
|
|
*/
|
|
ibcr.word = read_aux_reg(ARC_BCR_IC_BUILD);
|
|
if (ibcr.fields.ver) {
|
|
ic_line_sz = 8 << ibcr.fields.line_len;
|
|
if (!ic_line_sz)
|
|
panic("Instruction exists but line length is 0\n");
|
|
}
|
|
|
|
dbcr.word = read_aux_reg(ARC_BCR_DC_BUILD);
|
|
if (dbcr.fields.ver) {
|
|
gd->arch.l1_line_sz = dc_line_sz = 16 << dbcr.fields.line_len;
|
|
if (!dc_line_sz)
|
|
panic("Data cache exists but line length is 0\n");
|
|
}
|
|
}
|
|
|
|
void cache_init(void)
|
|
{
|
|
read_decode_cache_bcr();
|
|
|
|
if (is_isa_arcv2())
|
|
read_decode_cache_bcr_arcv2();
|
|
|
|
if (is_isa_arcv2() && ioc_enabled())
|
|
arc_ioc_setup();
|
|
|
|
if (is_isa_arcv2() && slc_exists())
|
|
slc_upper_region_init();
|
|
}
|
|
|
|
int icache_status(void)
|
|
{
|
|
return icache_enabled();
|
|
}
|
|
|
|
void icache_enable(void)
|
|
{
|
|
if (icache_exists())
|
|
write_aux_reg(ARC_AUX_IC_CTRL, read_aux_reg(ARC_AUX_IC_CTRL) &
|
|
~IC_CTRL_CACHE_DISABLE);
|
|
}
|
|
|
|
void icache_disable(void)
|
|
{
|
|
if (!icache_exists())
|
|
return;
|
|
|
|
__ic_entire_invalidate();
|
|
|
|
write_aux_reg(ARC_AUX_IC_CTRL, read_aux_reg(ARC_AUX_IC_CTRL) |
|
|
IC_CTRL_CACHE_DISABLE);
|
|
}
|
|
|
|
/* IC supports only invalidation */
|
|
static inlined_cachefunc void __ic_entire_invalidate(void)
|
|
{
|
|
if (!icache_enabled())
|
|
return;
|
|
|
|
/* Any write to IC_IVIC register triggers invalidation of entire I$ */
|
|
write_aux_reg(ARC_AUX_IC_IVIC, 1);
|
|
/*
|
|
* As per ARC HS databook (see chapter 5.3.3.2)
|
|
* it is required to add 3 NOPs after each write to IC_IVIC.
|
|
*/
|
|
__builtin_arc_nop();
|
|
__builtin_arc_nop();
|
|
__builtin_arc_nop();
|
|
read_aux_reg(ARC_AUX_IC_CTRL); /* blocks */
|
|
}
|
|
|
|
void invalidate_icache_all(void)
|
|
{
|
|
__ic_entire_invalidate();
|
|
|
|
/*
|
|
* If SL$ is bypassed for data it is used only for instructions,
|
|
* so we need to invalidate it too.
|
|
*/
|
|
if (is_isa_arcv2() && slc_data_bypass())
|
|
__slc_entire_op(OP_INV);
|
|
}
|
|
|
|
int dcache_status(void)
|
|
{
|
|
return dcache_enabled();
|
|
}
|
|
|
|
void dcache_enable(void)
|
|
{
|
|
if (!dcache_exists())
|
|
return;
|
|
|
|
write_aux_reg(ARC_AUX_DC_CTRL, read_aux_reg(ARC_AUX_DC_CTRL) &
|
|
~(DC_CTRL_INV_MODE_FLUSH | DC_CTRL_CACHE_DISABLE));
|
|
}
|
|
|
|
void dcache_disable(void)
|
|
{
|
|
if (!dcache_exists())
|
|
return;
|
|
|
|
__dc_entire_op(OP_FLUSH_N_INV);
|
|
|
|
/*
|
|
* As SLC will be bypassed for data after L1 D$ disable we need to
|
|
* flush it first before L1 D$ disable. Also we invalidate SLC to
|
|
* avoid any inconsistent data problems after enabling L1 D$ again with
|
|
* dcache_enable function.
|
|
*/
|
|
if (is_isa_arcv2())
|
|
__slc_entire_op(OP_FLUSH_N_INV);
|
|
|
|
write_aux_reg(ARC_AUX_DC_CTRL, read_aux_reg(ARC_AUX_DC_CTRL) |
|
|
DC_CTRL_CACHE_DISABLE);
|
|
}
|
|
|
|
/* Common Helper for Line Operations on D-cache */
|
|
static inline void __dcache_line_loop(unsigned long paddr, unsigned long sz,
|
|
const int cacheop)
|
|
{
|
|
unsigned int aux_cmd;
|
|
int num_lines;
|
|
|
|
/* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */
|
|
aux_cmd = cacheop & OP_INV ? ARC_AUX_DC_IVDL : ARC_AUX_DC_FLDL;
|
|
|
|
sz += paddr & ~CACHE_LINE_MASK;
|
|
paddr &= CACHE_LINE_MASK;
|
|
|
|
num_lines = DIV_ROUND_UP(sz, gd->arch.l1_line_sz);
|
|
|
|
while (num_lines-- > 0) {
|
|
#if (CONFIG_ARC_MMU_VER == 3)
|
|
write_aux_reg(ARC_AUX_DC_PTAG, paddr);
|
|
#endif
|
|
write_aux_reg(aux_cmd, paddr);
|
|
paddr += gd->arch.l1_line_sz;
|
|
}
|
|
}
|
|
|
|
static inlined_cachefunc void __before_dc_op(const int op)
|
|
{
|
|
unsigned int ctrl;
|
|
|
|
ctrl = read_aux_reg(ARC_AUX_DC_CTRL);
|
|
|
|
/* IM bit implies flush-n-inv, instead of vanilla inv */
|
|
if (op == OP_INV)
|
|
ctrl &= ~DC_CTRL_INV_MODE_FLUSH;
|
|
else
|
|
ctrl |= DC_CTRL_INV_MODE_FLUSH;
|
|
|
|
write_aux_reg(ARC_AUX_DC_CTRL, ctrl);
|
|
}
|
|
|
|
static inlined_cachefunc void __after_dc_op(const int op)
|
|
{
|
|
if (op & OP_FLUSH) /* flush / flush-n-inv both wait */
|
|
while (read_aux_reg(ARC_AUX_DC_CTRL) & DC_CTRL_FLUSH_STATUS);
|
|
}
|
|
|
|
static inlined_cachefunc void __dc_entire_op(const int cacheop)
|
|
{
|
|
int aux;
|
|
|
|
if (!dcache_enabled())
|
|
return;
|
|
|
|
__before_dc_op(cacheop);
|
|
|
|
if (cacheop & OP_INV) /* Inv or flush-n-inv use same cmd reg */
|
|
aux = ARC_AUX_DC_IVDC;
|
|
else
|
|
aux = ARC_AUX_DC_FLSH;
|
|
|
|
write_aux_reg(aux, 0x1);
|
|
|
|
__after_dc_op(cacheop);
|
|
}
|
|
|
|
static inline void __dc_line_op(unsigned long paddr, unsigned long sz,
|
|
const int cacheop)
|
|
{
|
|
if (!dcache_enabled())
|
|
return;
|
|
|
|
__before_dc_op(cacheop);
|
|
__dcache_line_loop(paddr, sz, cacheop);
|
|
__after_dc_op(cacheop);
|
|
}
|
|
|
|
void invalidate_dcache_range(unsigned long start, unsigned long end)
|
|
{
|
|
if (start >= end)
|
|
return;
|
|
|
|
/*
|
|
* ARCv1 -> call __dc_line_op
|
|
* ARCv2 && L1 D$ disabled -> nothing
|
|
* ARCv2 && L1 D$ enabled && IOC enabled -> nothing
|
|
* ARCv2 && L1 D$ enabled && no IOC -> call __dc_line_op; call __slc_rgn_op
|
|
*/
|
|
if (!is_isa_arcv2() || !ioc_enabled())
|
|
__dc_line_op(start, end - start, OP_INV);
|
|
|
|
if (is_isa_arcv2() && !ioc_enabled() && !slc_data_bypass())
|
|
__slc_rgn_op(start, end - start, OP_INV);
|
|
}
|
|
|
|
void flush_dcache_range(unsigned long start, unsigned long end)
|
|
{
|
|
if (start >= end)
|
|
return;
|
|
|
|
/*
|
|
* ARCv1 -> call __dc_line_op
|
|
* ARCv2 && L1 D$ disabled -> nothing
|
|
* ARCv2 && L1 D$ enabled && IOC enabled -> nothing
|
|
* ARCv2 && L1 D$ enabled && no IOC -> call __dc_line_op; call __slc_rgn_op
|
|
*/
|
|
if (!is_isa_arcv2() || !ioc_enabled())
|
|
__dc_line_op(start, end - start, OP_FLUSH);
|
|
|
|
if (is_isa_arcv2() && !ioc_enabled() && !slc_data_bypass())
|
|
__slc_rgn_op(start, end - start, OP_FLUSH);
|
|
}
|
|
|
|
void flush_cache(unsigned long start, unsigned long size)
|
|
{
|
|
flush_dcache_range(start, start + size);
|
|
}
|
|
|
|
/*
|
|
* As invalidate_dcache_all() is not used in generic U-Boot code and as we
|
|
* don't need it in arch/arc code alone (invalidate without flush) we implement
|
|
* flush_n_invalidate_dcache_all (flush and invalidate in 1 operation) because
|
|
* it's much safer. See [ NOTE 1 ] for more details.
|
|
*/
|
|
void flush_n_invalidate_dcache_all(void)
|
|
{
|
|
__dc_entire_op(OP_FLUSH_N_INV);
|
|
|
|
if (is_isa_arcv2() && !slc_data_bypass())
|
|
__slc_entire_op(OP_FLUSH_N_INV);
|
|
}
|
|
|
|
void flush_dcache_all(void)
|
|
{
|
|
__dc_entire_op(OP_FLUSH);
|
|
|
|
if (is_isa_arcv2() && !slc_data_bypass())
|
|
__slc_entire_op(OP_FLUSH);
|
|
}
|
|
|
|
/*
|
|
* This is function to cleanup all caches (and therefore sync I/D caches) which
|
|
* can be used for cleanup before linux launch or to sync caches during
|
|
* relocation.
|
|
*/
|
|
void sync_n_cleanup_cache_all(void)
|
|
{
|
|
__dc_entire_op(OP_FLUSH_N_INV);
|
|
|
|
/*
|
|
* If SL$ is bypassed for data it is used only for instructions,
|
|
* and we shouldn't flush it. So invalidate it instead of flush_n_inv.
|
|
*/
|
|
if (is_isa_arcv2()) {
|
|
if (slc_data_bypass())
|
|
__slc_entire_op(OP_INV);
|
|
else
|
|
__slc_entire_op(OP_FLUSH_N_INV);
|
|
}
|
|
|
|
__ic_entire_invalidate();
|
|
}
|