u-boot/board/mgsuvd/mgsuvd.c
Heiko Schocher 381e4e6397 Added support for the mgsuvd board from keymile.
Signed-off-by: Heiko Schocher <hs@denx.de>
2008-01-12 00:32:34 +01:00

216 lines
6.3 KiB
C

/*
* (C) Copyright 2007
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#if 0
#define DEBUG
#endif
#include <common.h>
#include <mpc8xx.h>
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
const uint sdram_table[] =
{
0x0f07fc04, 0x0ffffc04, 0x00bdfc04, 0x0ff77c00,
0x1ffffc05, 0xfffffc04, 0xfffffc04, 0xfffffc04,
/* 0x08 Burst Read */
0x0f07fc04, 0x0ffffc04, 0x00bdfc04, 0x00fffc00,
0x00fffc00, 0x00fffc00, 0x0ff77c00, 0x1ffffc05,
/* 0x10 Load mode register */
0x0ffffc34, 0x0ff57c04, 0x0ffffc04, 0x1ffffc05,
0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
/* 0x18 Single Write */
0x0f07fc04, 0x0ffffc00, 0x00bd7c04, 0x0ffffc04,
0x0ff77c04, 0x1ffffc05, 0xfffffc04, 0xfffffc04,
/* 0x20 Burst Write */
0x0f07fc04, 0x0ffffc00, 0x00bd7c00, 0x00fffc00,
0x00fffc00, 0x00fffc04, 0x0ffffc04, 0x0ff77c04,
0x1ffffc05, 0xfffffc04, 0xfffffc04, 0xfffffc04,
0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
/* 0x30 Precharge all and Refresh */
0x0ff77c04, 0x0ffffc04, 0x0ff5fc84, 0x0ffffc04,
0x0ffffc04, 0x0ffffc84, 0x1ffffc05, 0xfffffc04,
0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
/* 0x3C Exception */
0x7ffffc04, 0xfffffc07, 0xfffffc04, 0xfffffc04,
};
int checkboard (void)
{
puts ("Board: Keymile mgsuvd\n");
return (0);
}
long int initdram (int board_type)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
long int size;
upmconfig (UPMB, (uint *) sdram_table,
sizeof (sdram_table) / sizeof (uint));
/*
* Preliminary prescaler for refresh (depends on number of
* banks): This value is selected for four cycles every 62.4 us
* with two SDRAM banks or four cycles every 31.2 us with one
* bank. It will be adjusted after memory sizing.
*/
memctl->memc_mptpr = CFG_MPTPR;
/*
* The following value is used as an address (i.e. opcode) for
* the LOAD MODE REGISTER COMMAND during SDRAM initialisation. If
* the port size is 32bit the SDRAM does NOT "see" the lower two
* address lines, i.e. mar=0x00000088 -> opcode=0x00000022 for
* MICRON SDRAMs:
* -> 0 00 010 0 010
* | | | | +- Burst Length = 4
* | | | +----- Burst Type = Sequential
* | | +------- CAS Latency = 2
* | +----------- Operating Mode = Standard
* +-------------- Write Burst Mode = Programmed Burst Length
*/
memctl->memc_mar = CFG_MAR;
/*
* Map controller banks 1 to the SDRAM banks 1 at
* preliminary addresses - these have to be modified after the
* SDRAM size has been determined.
*/
memctl->memc_or1 = CFG_OR1_PRELIM;
memctl->memc_br1 = CFG_BR1_PRELIM;
memctl->memc_mbmr = CFG_MBMR & (~(MBMR_PTBE)); /* no refresh yet */
udelay (200);
/* perform SDRAM initializsation sequence */
memctl->memc_mcr = 0x80802830; /* SDRAM bank 0 */
udelay (1);
memctl->memc_mcr = 0x80802110; /* SDRAM bank 0 - execute twice */
udelay (1);
memctl->memc_mbmr |= MBMR_PTBE; /* enable refresh */
udelay (1000);
/*
* Check Bank 0 Memory Size for re-configuration
*
*/
size = get_ram_size(SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
udelay (1000);
debug ("SDRAM Bank 0: %ld MB\n", size >> 20);
return (size);
}
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
/*
* update "memory" property in the blob
*/
void ft_blob_update(void *blob, bd_t *bd)
{
int ret, nodeoffset = 0;
ulong brg_data[1] = {0};
ulong memory_data[2] = {0};
ulong flash_data[4] = {0};
memory_data[0] = cpu_to_be32(bd->bi_memstart);
memory_data[1] = cpu_to_be32(bd->bi_memsize);
nodeoffset = fdt_path_offset (blob, "/memory");
if (nodeoffset >= 0) {
ret = fdt_setprop(blob, nodeoffset, "reg", memory_data,
sizeof(memory_data));
if (ret < 0)
printf("ft_blob_update): cannot set /memory/reg "
"property err:%s\n", fdt_strerror(ret));
}
else {
/* memory node is required in dts */
printf("ft_blob_update(): cannot find /memory node "
"err:%s\n", fdt_strerror(nodeoffset));
}
flash_data[2] = cpu_to_be32(bd->bi_flashstart);
flash_data[3] = cpu_to_be32(bd->bi_flashsize);
nodeoffset = fdt_path_offset (blob, "/localbus");
if (nodeoffset >= 0) {
ret = fdt_setprop(blob, nodeoffset, "ranges", flash_data,
sizeof(flash_data));
if (ret < 0)
printf("ft_blob_update): cannot set /localbus/ranges "
"property err:%s\n", fdt_strerror(ret));
}
else {
/* memory node is required in dts */
printf("ft_blob_update(): cannot find /localbus node "
"err:%s\n", fdt_strerror(nodeoffset));
}
/* BRG */
brg_data[0] = cpu_to_be32(bd->bi_busfreq);
nodeoffset = fdt_path_offset (blob, "/soc866/cpm");
if (nodeoffset >= 0) {
ret = fdt_setprop(blob, nodeoffset, "brg-frequency", brg_data,
sizeof(brg_data));
if (ret < 0)
printf("ft_blob_update): cannot set /soc866/cpm/brg-frequency "
"property err:%s\n", fdt_strerror(ret));
}
else {
/* memory node is required in dts */
printf("ft_blob_update(): cannot find /localbus node "
"err:%s\n", fdt_strerror(nodeoffset));
}
/* MAC Adresse */
nodeoffset = fdt_path_offset (blob, "/soc866/cpm/scc");
if (nodeoffset >= 0) {
ret = fdt_setprop(blob, nodeoffset, "mac-address", bd->bi_enetaddr,
sizeof(uchar) * 6);
if (ret < 0)
printf("ft_blob_update): cannot set /soc866/cpm/scc/mac-address "
"property err:%s\n", fdt_strerror(ret));
}
else {
/* memory node is required in dts */
printf("ft_blob_update(): cannot find /localbus node "
"err:%s\n", fdt_strerror(nodeoffset));
}
}
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup( blob, bd);
ft_blob_update(blob, bd);
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */