u-boot/drivers/mtd/spi/fsl_espi_spl.c
Priyanka Jain 7aa6c455c3 powerpc: spiflash:Add corenet devices support in eSPI SPL
Existing eSPI SPL framework assumes booting from spi-image
with boot_format header which contains final u-boot Image
offset and size. No such header is present in case of
corenet devices like T1040 as corenet deivces use PBI-RCW
based intialization.

So, for corenet deives, SPL bootloader use values provided
at compilation time. These values can be defined in board
specific config file.

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>
2013-12-04 14:54:34 -08:00

67 lines
1.7 KiB
C

/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <spi_flash.h>
#include <malloc.h>
#define ESPI_BOOT_IMAGE_SIZE 0x48
#define ESPI_BOOT_IMAGE_ADDR 0x50
#define CONFIG_CFG_DATA_SECTOR 0
/*
* The main entry for SPI booting. It's necessary that SDRAM is already
* configured and available since this code loads the main U-Boot image
* from SPI into SDRAM and starts it from there.
*/
void spi_boot(void)
{
void (*uboot)(void) __noreturn;
u32 offset, code_len;
unsigned char *buf = NULL;
struct spi_flash *flash;
flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
if (flash == NULL) {
puts("\nspi_flash_probe failed");
hang();
}
#ifdef CONFIG_FSL_CORENET
offset = CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS;
code_len = CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE;
#else
/*
* Load U-Boot image from SPI flash into RAM
*/
buf = malloc(flash->page_size);
if (buf == NULL) {
puts("\nmalloc failed");
hang();
}
memset(buf, 0, flash->page_size);
spi_flash_read(flash, CONFIG_CFG_DATA_SECTOR,
flash->page_size, (void *)buf);
offset = *(u32 *)(buf + ESPI_BOOT_IMAGE_ADDR);
/* Skip spl code */
offset += CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS;
/* Get the code size from offset 0x48 */
code_len = *(u32 *)(buf + ESPI_BOOT_IMAGE_SIZE);
/* Skip spl code */
code_len = code_len - CONFIG_SPL_MAX_SIZE;
#endif
/* copy code to DDR */
spi_flash_read(flash, offset, code_len,
(void *)CONFIG_SYS_SPI_FLASH_U_BOOT_DST);
/*
* Jump to U-Boot image
*/
flush_cache(CONFIG_SYS_SPI_FLASH_U_BOOT_DST, code_len);
uboot = (void *)CONFIG_SYS_SPI_FLASH_U_BOOT_START;
(*uboot)();
}