u-boot/board/xilinx/zynq/board.c
Michal Simek c67fecd212 ARM: zynq: Enable capsule update for qspi and mmc
Generate dfu_alt_info setup at runtime for capsule update.
Enabling this feature will help with upgrading boards without remembering
what is where.

The similar change was done for ZynqMP by commit b86f43de0b ("xilinx:
zynqmp: Add support for runtime dfu_alt_info setup").
Code needs to be enabled by CONFIG_SET_DFU_ALT_INFO.

And also enable capsule on disk for RAW firmware images with efidebug
command.

Two indexes are supported for SPL flow. Images can be generated like:
./tools/mkeficapsule --raw spl/boot.bin --index 1 capsule1.bin
./tools/mkeficapsule --raw u-boot.img --index 2 capsule2.bin

Then place them to SD card and load them:
load mmc 0 10000000 capsule1.bin && efidebug capsule update -v 10000000
load mmc 0 10000000 capsule2.bin && efidebug capsule update -v 10000000

FSBL flow will also work where only index 1 capsule is used. There
should be enough space for using boot.bin with bitstream too.

Zynq also support multiple boot locations in SPI or MMC but it is not wired
by this patch.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/bea5fc75a87a5971f118b46bab4aa7ca39a629c6.1630061610.git.michal.simek@xilinx.com
2021-09-30 12:26:25 +02:00

188 lines
3.7 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
* (C) Copyright 2013 - 2018 Xilinx, Inc.
*/
#include <common.h>
#include <init.h>
#include <log.h>
#include <dm/uclass.h>
#include <env.h>
#include <env_internal.h>
#include <fdtdec.h>
#include <fpga.h>
#include <malloc.h>
#include <memalign.h>
#include <mmc.h>
#include <watchdog.h>
#include <wdt.h>
#include <zynqpl.h>
#include <asm/global_data.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
#include "../common/board.h"
DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
if (IS_ENABLED(CONFIG_SPL_BUILD))
printf("Silicon version:\t%d\n", zynq_get_silicon_version());
return 0;
}
int board_late_init(void)
{
int env_targets_len = 0;
const char *mode;
char *new_targets;
char *env_targets;
if (!(gd->flags & GD_FLG_ENV_DEFAULT)) {
debug("Saved variables - Skipping\n");
return 0;
}
if (!CONFIG_IS_ENABLED(ENV_VARS_UBOOT_RUNTIME_CONFIG))
return 0;
switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) {
case ZYNQ_BM_QSPI:
mode = "qspi";
env_set("modeboot", "qspiboot");
break;
case ZYNQ_BM_NAND:
mode = "nand";
env_set("modeboot", "nandboot");
break;
case ZYNQ_BM_NOR:
mode = "nor";
env_set("modeboot", "norboot");
break;
case ZYNQ_BM_SD:
mode = "mmc0";
env_set("modeboot", "sdboot");
break;
case ZYNQ_BM_JTAG:
mode = "jtag pxe dhcp";
env_set("modeboot", "jtagboot");
break;
default:
mode = "";
env_set("modeboot", "");
break;
}
/*
* One terminating char + one byte for space between mode
* and default boot_targets
*/
env_targets = env_get("boot_targets");
if (env_targets)
env_targets_len = strlen(env_targets);
new_targets = calloc(1, strlen(mode) + env_targets_len + 2);
if (!new_targets)
return -ENOMEM;
sprintf(new_targets, "%s %s", mode,
env_targets ? env_targets : "");
env_set("boot_targets", new_targets);
return board_late_init_xilinx();
}
#if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
int dram_init_banksize(void)
{
return fdtdec_setup_memory_banksize();
}
int dram_init(void)
{
if (fdtdec_setup_mem_size_base() != 0)
return -EINVAL;
zynq_ddrc_init();
return 0;
}
#else
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_SYS_SDRAM_SIZE);
zynq_ddrc_init();
return 0;
}
#endif
enum env_location env_get_location(enum env_operation op, int prio)
{
u32 bootmode = zynq_slcr_get_boot_mode() & ZYNQ_BM_MASK;
if (prio)
return ENVL_UNKNOWN;
switch (bootmode) {
case ZYNQ_BM_SD:
if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT))
return ENVL_FAT;
if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4))
return ENVL_EXT4;
return ENVL_NOWHERE;
case ZYNQ_BM_NAND:
if (IS_ENABLED(CONFIG_ENV_IS_IN_NAND))
return ENVL_NAND;
if (IS_ENABLED(CONFIG_ENV_IS_IN_UBI))
return ENVL_UBI;
return ENVL_NOWHERE;
case ZYNQ_BM_NOR:
case ZYNQ_BM_QSPI:
if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH))
return ENVL_SPI_FLASH;
return ENVL_NOWHERE;
case ZYNQ_BM_JTAG:
default:
return ENVL_NOWHERE;
}
}
#if defined(CONFIG_SET_DFU_ALT_INFO)
#define DFU_ALT_BUF_LEN SZ_1K
void set_dfu_alt_info(char *interface, char *devstr)
{
ALLOC_CACHE_ALIGN_BUFFER(char, buf, DFU_ALT_BUF_LEN);
if (env_get("dfu_alt_info"))
return;
memset(buf, 0, sizeof(buf));
switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) {
case ZYNQ_BM_SD:
snprintf(buf, DFU_ALT_BUF_LEN,
"mmc 0:1=boot.bin fat 0 1;"
"u-boot.img fat 0 1");
break;
case ZYNQ_BM_QSPI:
snprintf(buf, DFU_ALT_BUF_LEN,
"sf 0:0=boot.bin raw 0 0x1500000;"
"u-boot.img raw 0x%x 0x500000",
CONFIG_SYS_SPI_U_BOOT_OFFS);
break;
default:
return;
}
env_set("dfu_alt_info", buf);
puts("DFU alt info setting: done\n");
}
#endif