mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 02:08:38 +00:00
edb8b7a66b
Now that we have a full VESA driver we may as well use that. We need to support the VESA layer being set up by early start-up code or by running a VGA ROM. Signed-off-by: Simon Glass <sjg@chromium.org>
90 lines
3.6 KiB
Text
90 lines
3.6 KiB
Text
config VIDEO_VESA
|
|
bool "Enable VESA video driver support"
|
|
depends on X86
|
|
default n
|
|
help
|
|
Turn on this option to enable a very simple driver which uses vesa
|
|
to discover the video mode and then provides a frame buffer for use
|
|
by U-Boot. This can in principle be used with any platform that
|
|
supports PCI and video cards that support VESA BIOS Extension (VBE).
|
|
|
|
config VIDEO_LCD_SSD2828
|
|
bool "SSD2828 bridge chip"
|
|
default n
|
|
---help---
|
|
Support for the SSD2828 bridge chip, which can take pixel data coming
|
|
from a parallel LCD interface and translate it on the fly into MIPI DSI
|
|
interface for driving a MIPI compatible LCD panel. It uses SPI for
|
|
configuration.
|
|
|
|
config VIDEO_LCD_SSD2828_TX_CLK
|
|
int "SSD2828 TX_CLK frequency (in MHz)"
|
|
depends on VIDEO_LCD_SSD2828
|
|
default 0
|
|
---help---
|
|
The frequency of the crystal, which is clocking SSD2828. It may be
|
|
anything in the 8MHz-30MHz range and the exact value should be
|
|
retrieved from the board schematics. Or in the case of Allwinner
|
|
hardware, it can be usually found as 'lcd_xtal_freq' variable in
|
|
FEX files. It can be also set to 0 for selecting PCLK from the
|
|
parallel LCD interface instead of TX_CLK as the PLL clock source.
|
|
|
|
config VIDEO_LCD_SSD2828_RESET
|
|
string "RESET pin of SSD2828"
|
|
depends on VIDEO_LCD_SSD2828
|
|
default ""
|
|
---help---
|
|
The reset pin of SSD2828 chip. This takes a string in the format
|
|
understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
|
|
|
|
config VIDEO_LCD_HITACHI_TX18D42VM
|
|
bool "Hitachi tx18d42vm LVDS LCD panel support"
|
|
depends on VIDEO
|
|
default n
|
|
---help---
|
|
Support for Hitachi tx18d42vm LVDS LCD panels, these panels have a
|
|
lcd controller which needs to be initialized over SPI, once that is
|
|
done they work like a regular LVDS panel.
|
|
|
|
config VIDEO_LCD_SPI_CS
|
|
string "SPI CS pin for LCD related config job"
|
|
depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM
|
|
default ""
|
|
---help---
|
|
This is one of the SPI communication pins, involved in setting up a
|
|
working LCD configuration. The exact role of SPI may differ for
|
|
different hardware setups. The option takes a string in the format
|
|
understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
|
|
|
|
config VIDEO_LCD_SPI_SCLK
|
|
string "SPI SCLK pin for LCD related config job"
|
|
depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM
|
|
default ""
|
|
---help---
|
|
This is one of the SPI communication pins, involved in setting up a
|
|
working LCD configuration. The exact role of SPI may differ for
|
|
different hardware setups. The option takes a string in the format
|
|
understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
|
|
|
|
config VIDEO_LCD_SPI_MOSI
|
|
string "SPI MOSI pin for LCD related config job"
|
|
depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM
|
|
default ""
|
|
---help---
|
|
This is one of the SPI communication pins, involved in setting up a
|
|
working LCD configuration. The exact role of SPI may differ for
|
|
different hardware setups. The option takes a string in the format
|
|
understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H.
|
|
|
|
config VIDEO_LCD_SPI_MISO
|
|
string "SPI MISO pin for LCD related config job (optional)"
|
|
depends on VIDEO_LCD_SSD2828
|
|
default ""
|
|
---help---
|
|
This is one of the SPI communication pins, involved in setting up a
|
|
working LCD configuration. The exact role of SPI may differ for
|
|
different hardware setups. If wired up, this pin may provide additional
|
|
useful functionality. Such as bi-directional communication with the
|
|
hardware and LCD panel id retrieval (if the panel can report it). The
|
|
option takes a string in the format understood by 'name_to_gpio'
|
|
function, e.g. PH1 for pin 1 of port H.
|