mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 02:08:38 +00:00
e4e8cb7138
The patch adds Freescale Layerscape PCIe driver and provides up to 4 controllers support. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
512 lines
12 KiB
C
512 lines
12 KiB
C
/*
|
|
* Copyright 2014-2015 Freescale Semiconductor, Inc.
|
|
* Layerscape PCIe driver
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/fsl_serdes.h>
|
|
#include <pci.h>
|
|
#include <asm/io.h>
|
|
#include <errno.h>
|
|
#include <malloc.h>
|
|
#include <asm/pcie_layerscape.h>
|
|
|
|
#ifndef CONFIG_SYS_PCI_MEMORY_BUS
|
|
#define CONFIG_SYS_PCI_MEMORY_BUS CONFIG_SYS_SDRAM_BASE
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_PCI_MEMORY_PHYS
|
|
#define CONFIG_SYS_PCI_MEMORY_PHYS CONFIG_SYS_SDRAM_BASE
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_PCI_MEMORY_SIZE
|
|
#define CONFIG_SYS_PCI_MEMORY_SIZE (2 * 1024 * 1024 * 1024UL) /* 2G */
|
|
#endif
|
|
|
|
/* iATU registers */
|
|
#define PCIE_ATU_VIEWPORT 0x900
|
|
#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
|
|
#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
|
|
#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
|
|
#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
|
|
#define PCIE_ATU_REGION_INDEX2 (0x2 << 0)
|
|
#define PCIE_ATU_REGION_INDEX3 (0x3 << 0)
|
|
#define PCIE_ATU_CR1 0x904
|
|
#define PCIE_ATU_TYPE_MEM (0x0 << 0)
|
|
#define PCIE_ATU_TYPE_IO (0x2 << 0)
|
|
#define PCIE_ATU_TYPE_CFG0 (0x4 << 0)
|
|
#define PCIE_ATU_TYPE_CFG1 (0x5 << 0)
|
|
#define PCIE_ATU_CR2 0x908
|
|
#define PCIE_ATU_ENABLE (0x1 << 31)
|
|
#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30)
|
|
#define PCIE_ATU_LOWER_BASE 0x90C
|
|
#define PCIE_ATU_UPPER_BASE 0x910
|
|
#define PCIE_ATU_LIMIT 0x914
|
|
#define PCIE_ATU_LOWER_TARGET 0x918
|
|
#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
|
|
#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
|
|
#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
|
|
#define PCIE_ATU_UPPER_TARGET 0x91C
|
|
|
|
#define PCIE_LINK_CAP 0x7c
|
|
#define PCIE_LINK_SPEED_MASK 0xf
|
|
#define PCIE_LINK_STA 0x82
|
|
|
|
#define PCIE_DBI_SIZE (4 * 1024) /* 4K */
|
|
|
|
struct ls_pcie {
|
|
int idx;
|
|
void __iomem *dbi;
|
|
void __iomem *va_cfg0;
|
|
void __iomem *va_cfg1;
|
|
struct pci_controller hose;
|
|
};
|
|
|
|
struct ls_pcie_info {
|
|
unsigned long regs;
|
|
int pci_num;
|
|
u64 cfg0_phys;
|
|
u64 cfg0_size;
|
|
u64 cfg1_phys;
|
|
u64 cfg1_size;
|
|
u64 mem_bus;
|
|
u64 mem_phys;
|
|
u64 mem_size;
|
|
u64 io_bus;
|
|
u64 io_phys;
|
|
u64 io_size;
|
|
};
|
|
|
|
#define SET_LS_PCIE_INFO(x, num) \
|
|
{ \
|
|
x.regs = CONFIG_SYS_PCIE##num##_ADDR; \
|
|
x.cfg0_phys = CONFIG_SYS_PCIE_CFG0_PHYS_OFF + \
|
|
CONFIG_SYS_PCIE##num##_PHYS_ADDR; \
|
|
x.cfg0_size = CONFIG_SYS_PCIE_CFG0_SIZE; \
|
|
x.cfg1_phys = CONFIG_SYS_PCIE_CFG1_PHYS_OFF + \
|
|
CONFIG_SYS_PCIE##num##_PHYS_ADDR; \
|
|
x.cfg1_size = CONFIG_SYS_PCIE_CFG1_SIZE; \
|
|
x.mem_bus = CONFIG_SYS_PCIE_MEM_BUS; \
|
|
x.mem_phys = CONFIG_SYS_PCIE_MEM_PHYS_OFF + \
|
|
CONFIG_SYS_PCIE##num##_PHYS_ADDR; \
|
|
x.mem_size = CONFIG_SYS_PCIE_MEM_SIZE; \
|
|
x.io_bus = CONFIG_SYS_PCIE_IO_BUS; \
|
|
x.io_phys = CONFIG_SYS_PCIE_IO_PHYS_OFF + \
|
|
CONFIG_SYS_PCIE##num##_PHYS_ADDR; \
|
|
x.io_size = CONFIG_SYS_PCIE_IO_SIZE; \
|
|
x.pci_num = num; \
|
|
}
|
|
|
|
#ifdef CONFIG_LS102XA
|
|
#include <asm/arch/immap_ls102xa.h>
|
|
|
|
/* PEX1/2 Misc Ports Status Register */
|
|
#define LTSSM_STATE_SHIFT 20
|
|
#define LTSSM_STATE_MASK 0x3f
|
|
#define LTSSM_PCIE_L0 0x11 /* L0 state */
|
|
|
|
static int ls_pcie_link_state(struct ls_pcie *pcie)
|
|
{
|
|
u32 state;
|
|
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
|
|
|
|
state = in_be32(&scfg->pexmscportsr[pcie->idx]);
|
|
state = (state >> LTSSM_STATE_SHIFT) & LTSSM_STATE_MASK;
|
|
if (state < LTSSM_PCIE_L0) {
|
|
debug("....PCIe link error. LTSSM=0x%02x.\n", state);
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
#else
|
|
#define PCIE_LDBG 0x7FC
|
|
|
|
static int ls_pcie_link_state(struct ls_pcie *pcie)
|
|
{
|
|
u32 state;
|
|
|
|
state = readl(pcie->dbi + PCIE_LDBG);
|
|
if (state)
|
|
return 1;
|
|
|
|
debug("....PCIe link error.\n");
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int ls_pcie_link_up(struct ls_pcie *pcie)
|
|
{
|
|
int state;
|
|
u32 cap;
|
|
|
|
state = ls_pcie_link_state(pcie);
|
|
if (state)
|
|
return state;
|
|
|
|
/* Try to download speed to gen1 */
|
|
cap = readl(pcie->dbi + PCIE_LINK_CAP);
|
|
writel((cap & (~PCIE_LINK_SPEED_MASK)) | 1, pcie->dbi + PCIE_LINK_CAP);
|
|
udelay(2000);
|
|
state = ls_pcie_link_state(pcie);
|
|
if (state)
|
|
return state;
|
|
|
|
writel(cap, pcie->dbi + PCIE_LINK_CAP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ls_pcie_cfg0_set_busdev(struct ls_pcie *pcie, u32 busdev)
|
|
{
|
|
writel(PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
|
|
pcie->dbi + PCIE_ATU_VIEWPORT);
|
|
writel(busdev, pcie->dbi + PCIE_ATU_LOWER_TARGET);
|
|
}
|
|
|
|
static void ls_pcie_cfg1_set_busdev(struct ls_pcie *pcie, u32 busdev)
|
|
{
|
|
writel(PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
|
|
pcie->dbi + PCIE_ATU_VIEWPORT);
|
|
writel(busdev, pcie->dbi + PCIE_ATU_LOWER_TARGET);
|
|
}
|
|
|
|
static void ls_pcie_iatu_outbound_set(struct ls_pcie *pcie, int idx, int type,
|
|
u64 phys, u64 bus_addr, pci_size_t size)
|
|
{
|
|
writel(PCIE_ATU_REGION_OUTBOUND | idx, pcie->dbi + PCIE_ATU_VIEWPORT);
|
|
writel((u32)phys, pcie->dbi + PCIE_ATU_LOWER_BASE);
|
|
writel(phys >> 32, pcie->dbi + PCIE_ATU_UPPER_BASE);
|
|
writel(phys + size - 1, pcie->dbi + PCIE_ATU_LIMIT);
|
|
writel((u32)bus_addr, pcie->dbi + PCIE_ATU_LOWER_TARGET);
|
|
writel(bus_addr >> 32, pcie->dbi + PCIE_ATU_UPPER_TARGET);
|
|
writel(type, pcie->dbi + PCIE_ATU_CR1);
|
|
writel(PCIE_ATU_ENABLE, pcie->dbi + PCIE_ATU_CR2);
|
|
}
|
|
|
|
static void ls_pcie_setup_atu(struct ls_pcie *pcie, struct ls_pcie_info *info)
|
|
{
|
|
#ifdef DEBUG
|
|
int i;
|
|
#endif
|
|
|
|
/* ATU 0 : OUTBOUND : CFG0 */
|
|
ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX0,
|
|
PCIE_ATU_TYPE_CFG0,
|
|
info->cfg0_phys,
|
|
0,
|
|
info->cfg0_size);
|
|
/* ATU 1 : OUTBOUND : CFG1 */
|
|
ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX1,
|
|
PCIE_ATU_TYPE_CFG1,
|
|
info->cfg1_phys,
|
|
0,
|
|
info->cfg1_size);
|
|
/* ATU 2 : OUTBOUND : MEM */
|
|
ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX2,
|
|
PCIE_ATU_TYPE_MEM,
|
|
info->mem_phys,
|
|
info->mem_bus,
|
|
info->mem_size);
|
|
/* ATU 3 : OUTBOUND : IO */
|
|
ls_pcie_iatu_outbound_set(pcie, PCIE_ATU_REGION_INDEX3,
|
|
PCIE_ATU_TYPE_IO,
|
|
info->io_phys,
|
|
info->io_bus,
|
|
info->io_size);
|
|
|
|
#ifdef DEBUG
|
|
for (i = 0; i <= PCIE_ATU_REGION_INDEX3; i++) {
|
|
writel(PCIE_ATU_REGION_OUTBOUND | i,
|
|
pcie->dbi + PCIE_ATU_VIEWPORT);
|
|
debug("iATU%d:\n", i);
|
|
debug("\tLOWER PHYS 0x%08x\n",
|
|
readl(pcie->dbi + PCIE_ATU_LOWER_BASE));
|
|
debug("\tUPPER PHYS 0x%08x\n",
|
|
readl(pcie->dbi + PCIE_ATU_UPPER_BASE));
|
|
debug("\tLOWER BUS 0x%08x\n",
|
|
readl(pcie->dbi + PCIE_ATU_LOWER_TARGET));
|
|
debug("\tUPPER BUS 0x%08x\n",
|
|
readl(pcie->dbi + PCIE_ATU_UPPER_TARGET));
|
|
debug("\tLIMIT 0x%08x\n",
|
|
readl(pcie->dbi + PCIE_ATU_LIMIT));
|
|
debug("\tCR1 0x%08x\n",
|
|
readl(pcie->dbi + PCIE_ATU_CR1));
|
|
debug("\tCR2 0x%08x\n",
|
|
readl(pcie->dbi + PCIE_ATU_CR2));
|
|
}
|
|
#endif
|
|
}
|
|
|
|
int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev)
|
|
{
|
|
/* Do not skip controller */
|
|
return 0;
|
|
}
|
|
|
|
static int ls_pcie_addr_valid(struct pci_controller *hose, pci_dev_t d)
|
|
{
|
|
if (PCI_DEV(d) > 0)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ls_pcie_read_config(struct pci_controller *hose, pci_dev_t d,
|
|
int where, u32 *val)
|
|
{
|
|
struct ls_pcie *pcie = hose->priv_data;
|
|
u32 busdev, *addr;
|
|
|
|
if (ls_pcie_addr_valid(hose, d)) {
|
|
*val = 0xffffffff;
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (PCI_BUS(d) == hose->first_busno) {
|
|
addr = pcie->dbi + (where & ~0x3);
|
|
} else {
|
|
busdev = PCIE_ATU_BUS(PCI_BUS(d)) |
|
|
PCIE_ATU_DEV(PCI_DEV(d)) |
|
|
PCIE_ATU_FUNC(PCI_FUNC(d));
|
|
|
|
if (PCI_BUS(d) == hose->first_busno + 1) {
|
|
ls_pcie_cfg0_set_busdev(pcie, busdev);
|
|
addr = pcie->va_cfg0 + (where & ~0x3);
|
|
} else {
|
|
ls_pcie_cfg1_set_busdev(pcie, busdev);
|
|
addr = pcie->va_cfg1 + (where & ~0x3);
|
|
}
|
|
}
|
|
|
|
*val = readl(addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ls_pcie_write_config(struct pci_controller *hose, pci_dev_t d,
|
|
int where, u32 val)
|
|
{
|
|
struct ls_pcie *pcie = hose->priv_data;
|
|
u32 busdev, *addr;
|
|
|
|
if (ls_pcie_addr_valid(hose, d))
|
|
return -EINVAL;
|
|
|
|
if (PCI_BUS(d) == hose->first_busno) {
|
|
addr = pcie->dbi + (where & ~0x3);
|
|
} else {
|
|
busdev = PCIE_ATU_BUS(PCI_BUS(d)) |
|
|
PCIE_ATU_DEV(PCI_DEV(d)) |
|
|
PCIE_ATU_FUNC(PCI_FUNC(d));
|
|
|
|
if (PCI_BUS(d) == hose->first_busno + 1) {
|
|
ls_pcie_cfg0_set_busdev(pcie, busdev);
|
|
addr = pcie->va_cfg0 + (where & ~0x3);
|
|
} else {
|
|
ls_pcie_cfg1_set_busdev(pcie, busdev);
|
|
addr = pcie->va_cfg1 + (where & ~0x3);
|
|
}
|
|
}
|
|
|
|
writel(val, addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ls_pcie_setup_ctrl(struct ls_pcie *pcie,
|
|
struct ls_pcie_info *info)
|
|
{
|
|
struct pci_controller *hose = &pcie->hose;
|
|
pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0);
|
|
|
|
ls_pcie_setup_atu(pcie, info);
|
|
|
|
pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0);
|
|
|
|
/* program correct class for RC */
|
|
pci_hose_write_config_word(hose, dev, PCI_CLASS_DEVICE,
|
|
PCI_CLASS_BRIDGE_PCI);
|
|
}
|
|
|
|
int ls_pcie_init_ctrl(int busno, enum srds_prtcl dev, struct ls_pcie_info *info)
|
|
{
|
|
struct ls_pcie *pcie;
|
|
struct pci_controller *hose;
|
|
int num = dev - PCIE1;
|
|
pci_dev_t pdev = PCI_BDF(busno, 0, 0);
|
|
int i, linkup, ep_mode;
|
|
u8 header_type;
|
|
u16 temp16;
|
|
|
|
if (!is_serdes_configured(dev)) {
|
|
printf("PCIe%d: disabled\n", num + 1);
|
|
return busno;
|
|
}
|
|
|
|
pcie = malloc(sizeof(*pcie));
|
|
if (!pcie)
|
|
return busno;
|
|
memset(pcie, 0, sizeof(*pcie));
|
|
|
|
hose = &pcie->hose;
|
|
hose->priv_data = pcie;
|
|
hose->first_busno = busno;
|
|
pcie->idx = num;
|
|
pcie->dbi = map_physmem(info->regs, PCIE_DBI_SIZE, MAP_NOCACHE);
|
|
pcie->va_cfg0 = map_physmem(info->cfg0_phys,
|
|
info->cfg0_size,
|
|
MAP_NOCACHE);
|
|
pcie->va_cfg1 = map_physmem(info->cfg1_phys,
|
|
info->cfg1_size,
|
|
MAP_NOCACHE);
|
|
|
|
/* outbound memory */
|
|
pci_set_region(&hose->regions[0],
|
|
(pci_size_t)info->mem_bus,
|
|
(phys_size_t)info->mem_phys,
|
|
(pci_size_t)info->mem_size,
|
|
PCI_REGION_MEM);
|
|
|
|
/* outbound io */
|
|
pci_set_region(&hose->regions[1],
|
|
(pci_size_t)info->io_bus,
|
|
(phys_size_t)info->io_phys,
|
|
(pci_size_t)info->io_size,
|
|
PCI_REGION_IO);
|
|
|
|
/* System memory space */
|
|
pci_set_region(&hose->regions[2],
|
|
CONFIG_SYS_PCI_MEMORY_BUS,
|
|
CONFIG_SYS_PCI_MEMORY_PHYS,
|
|
CONFIG_SYS_PCI_MEMORY_SIZE,
|
|
PCI_REGION_SYS_MEMORY);
|
|
|
|
hose->region_count = 3;
|
|
|
|
for (i = 0; i < hose->region_count; i++)
|
|
debug("PCI reg:%d %016llx:%016llx %016llx %08lx\n",
|
|
i,
|
|
(u64)hose->regions[i].phys_start,
|
|
(u64)hose->regions[i].bus_start,
|
|
(u64)hose->regions[i].size,
|
|
hose->regions[i].flags);
|
|
|
|
pci_set_ops(hose,
|
|
pci_hose_read_config_byte_via_dword,
|
|
pci_hose_read_config_word_via_dword,
|
|
ls_pcie_read_config,
|
|
pci_hose_write_config_byte_via_dword,
|
|
pci_hose_write_config_word_via_dword,
|
|
ls_pcie_write_config);
|
|
|
|
pci_hose_read_config_byte(hose, pdev, PCI_HEADER_TYPE, &header_type);
|
|
ep_mode = (header_type & 0x7f) == PCI_HEADER_TYPE_NORMAL;
|
|
printf("PCIe%u: %s ", info->pci_num,
|
|
ep_mode ? "Endpoint" : "Root Complex");
|
|
|
|
linkup = ls_pcie_link_up(pcie);
|
|
|
|
if (!linkup) {
|
|
/* Let the user know there's no PCIe link */
|
|
printf("no link, regs @ 0x%lx\n", info->regs);
|
|
hose->last_busno = hose->first_busno;
|
|
return busno;
|
|
}
|
|
|
|
/* Print the negotiated PCIe link width */
|
|
pci_hose_read_config_word(hose, dev, PCIE_LINK_STA, &temp16);
|
|
printf("x%d gen%d, regs @ 0x%lx\n", (temp16 & 0x3f0) >> 4,
|
|
(temp16 & 0xf), info->regs);
|
|
|
|
if (ep_mode)
|
|
return busno;
|
|
|
|
ls_pcie_setup_ctrl(pcie, info);
|
|
|
|
pci_register_hose(hose);
|
|
|
|
hose->last_busno = pci_hose_scan(hose);
|
|
|
|
printf("PCIe%x: Bus %02x - %02x\n",
|
|
info->pci_num, hose->first_busno, hose->last_busno);
|
|
|
|
return hose->last_busno + 1;
|
|
}
|
|
|
|
int ls_pcie_init_board(int busno)
|
|
{
|
|
struct ls_pcie_info info;
|
|
|
|
#ifdef CONFIG_PCIE1
|
|
SET_LS_PCIE_INFO(info, 1);
|
|
busno = ls_pcie_init_ctrl(busno, PCIE1, &info);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE2
|
|
SET_LS_PCIE_INFO(info, 2);
|
|
busno = ls_pcie_init_ctrl(busno, PCIE2, &info);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE3
|
|
SET_LS_PCIE_INFO(info, 3);
|
|
busno = ls_pcie_init_ctrl(busno, PCIE3, &info);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE4
|
|
SET_LS_PCIE_INFO(info, 4);
|
|
busno = ls_pcie_init_ctrl(busno, PCIE4, &info);
|
|
#endif
|
|
|
|
return busno;
|
|
}
|
|
|
|
void pci_init_board(void)
|
|
{
|
|
ls_pcie_init_board(0);
|
|
}
|
|
|
|
#ifdef CONFIG_OF_BOARD_SETUP
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
|
|
static void ft_pcie_ls_setup(void *blob, const char *pci_compat,
|
|
unsigned long ctrl_addr, enum srds_prtcl dev)
|
|
{
|
|
int off;
|
|
|
|
off = fdt_node_offset_by_compat_reg(blob, pci_compat,
|
|
(phys_addr_t)ctrl_addr);
|
|
if (off < 0)
|
|
return;
|
|
|
|
if (!is_serdes_configured(dev))
|
|
fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
|
|
}
|
|
|
|
void ft_pcie_setup(void *blob, bd_t *bd)
|
|
{
|
|
#ifdef CONFIG_PCIE1
|
|
ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE1_ADDR, PCIE1);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE2
|
|
ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE2_ADDR, PCIE2);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE3
|
|
ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE3_ADDR, PCIE3);
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE4
|
|
ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE4_ADDR, PCIE4);
|
|
#endif
|
|
}
|
|
|
|
#else
|
|
void ft_pcie_setup(void *blob, bd_t *bd)
|
|
{
|
|
}
|
|
#endif
|