u-boot/drivers/pwm/Kconfig
Simon Glass 43b41566f7 dm: sandbox: pwm: Add a basic pwm test
Unfortunately a test for the PWM uclass was not included when it was
submitted. This was noticed when trying to add more functionality:

   http://patchwork.ozlabs.org/patch/748172/

Add a simple test to get us started.

Signed-off-by: Simon Glass <sjg@chromium.org>
2017-04-27 16:49:02 -04:00

45 lines
1.7 KiB
Text

config DM_PWM
bool "Enable support for pulse-width modulation devices (PWM)"
depends on DM
help
A pulse-width modulator emits a pulse of varying width and provides
control over the duty cycle (high and low time) of the signal. This
is often used to control a voltage level. The more time the PWM
spends in the 'high' state, the higher the voltage. The PWM's
frequency/period can be controlled along with the proportion of that
time that the signal is high.
config PWM_EXYNOS
bool "Enable support for the Exynos PWM"
depends on DM_PWM
help
This PWM is found on Samsung Exynos 5250 and other Samsung SoCs. It
supports a programmable period and duty cycle. A 32-bit counter is
used. It provides 5 channels which can be independently
programmed. Channel 4 (the last) is normally used as a timer.
config PWM_ROCKCHIP
bool "Enable support for the Rockchip PWM"
depends on DM_PWM
help
This PWM is found on RK3288 and other Rockchip SoCs. It supports a
programmable period and duty cycle. A 32-bit counter is used.
Various options provided in the hardware (such as capture mode and
continuous/single-shot) are not supported by the driver.
config PWM_SANDBOX
bool "Enable support for the sandbox PWM"
help
This is a sandbox PWM used for testing. It provides 3 channels and
records the settings passed into it, but otherwise does nothing
useful. The PWM can be enabled but is not connected to any outputs
so this is not very useful.
config PWM_TEGRA
bool "Enable support for the Tegra PWM"
depends on DM_PWM
help
This PWM is found on Tegra 20 and other Nvidia SoCs. It supports
four channels with a programmable period and duty cycle. Only a
32KHz clock is supported by the driver but the duty cycle is
configurable.