mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 18:41:03 +00:00
71204e95ce
1. Introduce a new structure `struct mxc_i2c_bus`, this structure will
used for non-DM and DM.
2. Remove `struct mxc_i2c_regs` structure, but use register offset to access
registers based on `base` entry of `struct mxc_i2c_bus`.
3. Remove most `#ifdef I2C_QUIRK_REG`. Using driver_data to contain platform
flags. A new flag is introduced, I2C_QUIRK_FLAG.
4. Most functions use `struct mxc_i2c_bus` as one of the parameters.
Make most functions common to DM and non-DM, try to avoid duplicated code.
5. Support DM, but pinctrl is not included. Pinmux setting is still set
by setup_i2c, but we do not need bus_i2c_init for DM.
6. struct i2c_parms and struct sram_data are removed.
7. Remove bus_i2c_read bus_i2c_write prototype in header file. The frist
paramter of bus_i2c_init is modified to i2c index. Add new prototype
i2c_idle_bus and force_bus_idle. Since bus_i2c_init is not good for
DM I2C and pinctrl is missed, we use a weak function for i2c_idle_bus.
Board file take the responsibility to implement this function, like this:
"
int i2c_idle_bus(struct mxc_i2c_bus *i2c_bus)
{
if (i2c_bus->index == 0)
force_bus_idle(i2c_pads_info0);
else if (i2c_bus->index == 1)
force_bus_idle(i2c_pads_info1);
else
xxxxxx
}
"
8. Introduce a weak function, enable_i2c_clk
9. Tested on an i.MX7 platform. Log info:
=> dm tree
Class Probed Name
----------------------------------------
root [ + ] root_driver
simple_bus [ ] |-- soc
simple_bus [ ] | |-- aips-bus@30000000
simple_bus [ ] | | |-- anatop@30360000
simple_bus [ ] | | `-- snvs@30370000
simple_bus [ ] | |-- aips-bus@30400000
simple_bus [ ] | `-- aips-bus@30800000
i2c [ ] | |-- i2c@30a20000
i2c [ ] | `-- i2c@30a40000
simple_bus [ ] `-- regulators
=> i2c dev 0
Setting bus to 0
=> i2c probe
Valid chip addresses: 08 50
=> i2c md 8 31
0031: 08 08 08 08 08 08 08 08 08 08 08 08 08 08 08 08
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Acked-by: Simon Glass <sjg@chromium.org>
91 lines
2.4 KiB
C
91 lines
2.4 KiB
C
/*
|
|
* Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#ifndef __ASM_ARCH_MXC_MXC_I2C_H__
|
|
#define __ASM_ARCH_MXC_MXC_I2C_H__
|
|
#include <asm/imx-common/iomux-v3.h>
|
|
|
|
struct i2c_pin_ctrl {
|
|
iomux_v3_cfg_t i2c_mode;
|
|
iomux_v3_cfg_t gpio_mode;
|
|
unsigned char gp;
|
|
unsigned char spare;
|
|
};
|
|
|
|
struct i2c_pads_info {
|
|
struct i2c_pin_ctrl scl;
|
|
struct i2c_pin_ctrl sda;
|
|
};
|
|
|
|
/*
|
|
* Information about i2c controller
|
|
* struct mxc_i2c_bus - information about the i2c[x] bus
|
|
* @index: i2c bus index
|
|
* @base: Address of I2C bus controller
|
|
* @driver_data: Flags for different platforms, such as I2C_QUIRK_FLAG.
|
|
* @speed: Speed of I2C bus
|
|
* @pads_info: pinctrl info for this i2c bus, will be used when pinctrl is ok.
|
|
* The following two is only to be compatible with non-DM part.
|
|
* @idle_bus_fn: function to force bus idle
|
|
* @idle_bus_data: parameter for idle_bus_fun
|
|
*/
|
|
struct mxc_i2c_bus {
|
|
/*
|
|
* board file can use this index to locate which i2c_pads_info is for
|
|
* i2c_idle_bus. When pinmux is implement, this entry can be
|
|
* discarded. Here we do not use dev->seq, because we do not want to
|
|
* export device to board file.
|
|
*/
|
|
int index;
|
|
ulong base;
|
|
ulong driver_data;
|
|
int speed;
|
|
struct i2c_pads_info *pads_info;
|
|
#ifndef CONFIG_DM_I2C
|
|
int (*idle_bus_fn)(void *p);
|
|
void *idle_bus_data;
|
|
#endif
|
|
};
|
|
|
|
#if defined(CONFIG_MX6QDL)
|
|
#define I2C_PADS(name, scl_i2c, scl_gpio, scl_gp, sda_i2c, sda_gpio, sda_gp) \
|
|
struct i2c_pads_info mx6q_##name = { \
|
|
.scl = { \
|
|
.i2c_mode = MX6Q_##scl_i2c, \
|
|
.gpio_mode = MX6Q_##scl_gpio, \
|
|
.gp = scl_gp, \
|
|
}, \
|
|
.sda = { \
|
|
.i2c_mode = MX6Q_##sda_i2c, \
|
|
.gpio_mode = MX6Q_##sda_gpio, \
|
|
.gp = sda_gp, \
|
|
} \
|
|
}; \
|
|
struct i2c_pads_info mx6s_##name = { \
|
|
.scl = { \
|
|
.i2c_mode = MX6DL_##scl_i2c, \
|
|
.gpio_mode = MX6DL_##scl_gpio, \
|
|
.gp = scl_gp, \
|
|
}, \
|
|
.sda = { \
|
|
.i2c_mode = MX6DL_##sda_i2c, \
|
|
.gpio_mode = MX6DL_##sda_gpio, \
|
|
.gp = sda_gp, \
|
|
} \
|
|
};
|
|
|
|
|
|
#define I2C_PADS_INFO(name) \
|
|
(is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) ? \
|
|
&mx6q_##name : &mx6s_##name
|
|
#endif
|
|
|
|
int setup_i2c(unsigned i2c_index, int speed, int slave_addr,
|
|
struct i2c_pads_info *p);
|
|
void bus_i2c_init(int index, int speed, int slave_addr,
|
|
int (*idle_bus_fn)(void *p), void *p);
|
|
int force_idle_bus(void *priv);
|
|
int i2c_idle_bus(struct mxc_i2c_bus *i2c_bus);
|
|
#endif
|