u-boot/include/configs/highbank.h
Tom Rini 39bcbb7740 bootcount: Migrate CONFIG_SYS_BOOTCOUNT_ADDR
Migrate the users of CONFIG_SYS_BOOTCOUNT_ADDR to Kconfig.  We can
provide a default for BOOTCOUNT_AM33XX as that's a specific part of the
RTC in use.  We can also provide a default for ARCH_LS1043A and
ARCH_LS1021A as they had been previously calculated and their symbols
are in Kconfig.  In the case of other QE-enabled platforms, they are not
so we must update the relevant defconfig files.  The previous default
only applied in some cases, even on a specific SoC family.

Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-25 13:41:54 -05:00

74 lines
1.9 KiB
C

/*
* Copyright 2010-2011 Calxeda, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_SYS_DCACHE_OFF
#define CONFIG_SYS_BOOTMAPSZ (16 << 20)
#define CONFIG_SYS_TIMER_RATE (150000000/256)
#define CONFIG_SYS_TIMER_COUNTER (0xFFF34000 + 0x4)
#define CONFIG_SYS_TIMER_COUNTS_DOWN
/*
* Size of malloc() pool
*/
#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
#define CONFIG_PL011_CLOCK 150000000
#define CONFIG_PL01x_PORTS { (void *)(0xFFF36000) }
#define CONFIG_CONS_INDEX 0
#define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */
#define CONFIG_MISC_INIT_R
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 5
#define CONFIG_SYS_SCSI_MAX_LUN 1
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
#define CONFIG_CALXEDA_XGMAC
/*
* Command line configuration.
*/
#define CONFIG_BOOT_RETRY_TIME -1
#define CONFIG_RESET_TO_RETRY
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LOAD_ADDR 0x800000
#define CONFIG_SYS_64BIT_LBA
/*-----------------------------------------------------------------------
* Physical Memory Map
* The DRAM is already setup, so do not touch the DT node later.
*/
#define CONFIG_NR_DRAM_BANKS 0
#define PHYS_SDRAM_1_SIZE (4089 << 20)
#define CONFIG_SYS_MEMTEST_START 0x100000
#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1_SIZE - 0x100000)
/* Environment data setup
*/
#define CONFIG_SYS_NVRAM_BASE_ADDR 0xfff88000 /* NVRAM base address */
#define CONFIG_SYS_NVRAM_SIZE 0x8000 /* NVRAM size */
#define CONFIG_ENV_SIZE 0x2000 /* Size of Environ */
#define CONFIG_ENV_ADDR CONFIG_SYS_NVRAM_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_INIT_SP_ADDR 0x01000000
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif