mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 13:56:30 +00:00
9c66ce662c
This patch ensures that the TZPC (BP147) and TZASC-400 programming happens for LS2085A SoC only when the desired config flags are enabled and ensures that the TZPC programming is done to allow Non-secure (NS) + secure (S) transactions only for DCGF registers. The TZASC component is not present on LS2085A-Rev1, so the TZASC-400 config flag is turned OFF for now. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
25 lines
1.3 KiB
Text
25 lines
1.3 KiB
Text
Freescale ARM64 SoCs like LS2085A have ARM TrustZone components like
|
|
TZPC-BP147 (TrustZone Protection Controller) and TZASC-400 (TrustZone
|
|
Address Space Controller).
|
|
|
|
While most of the configuration related programming of these peripherals
|
|
is left to a root-of-trust security software layer (running in EL3
|
|
privilege mode), but still some configurations of these peripherals
|
|
might be required while the bootloader is executing in EL3 privilege
|
|
mode. The following sections define how to turn on these features for
|
|
LS2085A like SoCs.
|
|
|
|
TZPC-BP147 (TrustZone Protection Controller)
|
|
============================================
|
|
- Depends on CONFIG_FSL_TZPC_BP147 configuration flag.
|
|
- Separates Secure World and Normal World on-chip RAM (OCRAM) spaces.
|
|
- Provides a programming model to set access control policy via the TZPC
|
|
TZDECPROT Registers.
|
|
|
|
TZASC-400 (TrustZone Address Space Controller)
|
|
==============================================
|
|
- Depends on CONFIG_FSL_TZASC_400 configuration flag.
|
|
- Separates Secure World and Normal World external memory spaces for bus masters
|
|
such as processors and DMA-equipped peripherals.
|
|
- Supports 8 fully programmable address regions, initially inactive at reset,
|
|
and one base region, always active, that covers the remaining address space.
|