u-boot/arch/arm/cpu/armv7
Hou Zhiqiang 71fe22256c fsl: serdes: ensure accessing the initialized maps of serdes protocol
Up to now, the function is_serdes_configed() doesn't check if the map
of serdes protocol is initialized before accessing it. The function
is_serdes_configed() will get wrong result when it was called before
the serdes protocol maps initialized. As the first element of the map
isn't used for any device, so use it as the flag to indicate if the
map has been initialized.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-14 14:06:49 -07:00
..
am33xx ARM: am33xx: Always inhibit init/refresh during DDR phy init 2016-07-25 12:00:06 -04:00
bcm235xx arm: bcm235xx: update clock framework 2016-06-24 17:24:38 -04:00
bcm281xx bcm281xx: add support for "USB OTG clock" 2014-12-29 16:31:23 -05:00
bcmcygnus arm: bcmcygnus: Add bcmcygnus u-architecture 2014-08-30 07:46:40 -04:00
bcmnsp arm: bcmnsp: Add bcmnsp u-architecture 2014-08-30 07:46:40 -04:00
iproc-common arm: iproc: Initial commit of iproc architecture code 2014-08-30 07:46:40 -04:00
kona-common board: arm:: Add support for Broadcom BCM23550 2016-06-13 08:56:02 -04:00
ls102xa fsl: serdes: ensure accessing the initialized maps of serdes protocol 2016-09-14 14:06:49 -07:00
mx5 arch: Make board selection choices optional 2015-05-12 18:10:02 -04:00
mx6 mx6: ddr: Allow changing REFSEL and REFR fields 2016-09-06 18:22:48 +02:00
mx7 ARM: armv7: move CONFIG_ARMV7_PSCI to Kconfig 2016-09-07 08:48:51 -04:00
omap-common ARM: OMAP4+: vcores: Remove duplicated code 2016-08-20 14:03:25 -04:00
omap3 omap3: Drop omap3_evm_quick_* targets 2016-08-05 20:53:53 -04:00
omap4 omap4: Check warm reset for reboot mode validity 2016-03-15 15:12:54 -04:00
omap5 ARM: OMAP5+: vcores: Drop unnecessary #ifndefs 2016-08-20 14:03:25 -04:00
s5p-common exynos: pwm: Add a driver for the exynos5 PWM 2016-05-25 13:25:18 +09:00
stv0991 stv0991: configure clock & pad muxing for qspi 2015-07-03 13:50:53 +05:30
sunxi ARM: Rework and correct barrier definitions 2016-08-05 07:23:57 -04:00
vf610 imx: vf610 add get_cpu_rev 2015-09-02 15:39:51 +02:00
arch_timer.c arm: add support for arch timer 2014-04-17 17:24:38 -04:00
cache_v7.c ARM: Rework and correct barrier definitions 2016-08-05 07:23:57 -04:00
cache_v7_asm.S arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_INVAL_ALL) with asm code 2016-04-11 20:48:27 -04:00
config.mk ARM: move -march=* and -mtune= options to arch/arm/Makefile 2015-03-27 16:55:22 +01:00
cp15.c ARM: Introduce erratum workaround for 454179 2015-03-13 09:28:48 -04:00
cpu.c arm: Turn of d-cache before i-cache 2015-09-02 21:28:25 -06:00
Kconfig ARM: armv7: move ARMV7_PSCI_NR_CPUS to Kconfig 2016-09-07 08:48:54 -04:00
lowlevel_init.S ARM: SPL: Use CONFIG_SPL_DM not CONFIG_DM 2015-08-12 20:48:07 -04:00
Makefile ARM: PSCI: Add helper functions to access per-CPU target PC storage 2016-07-15 15:54:58 +02:00
nonsec_virt.S ARM: PSCI: Split out common stack setup code from psci_arch_init 2016-07-15 15:54:56 +02:00
psci-common.c ARM: Rework and correct barrier definitions 2016-08-05 07:23:57 -04:00
psci.S ARMv7: PSCI: add PSCI v1.0 functions skeleton 2016-07-26 09:02:39 -07:00
start.S arm: Allow skipping of low-level init with I-cache on 2016-06-12 23:49:38 +02:00
syslib.c ARM: OMAP: hide custom bit manipulation function sr32() 2014-04-17 14:39:54 -04:00
virt-dt.c ARMv8/PSCI: Fixup the device tree for PSCI 2016-07-19 11:34:07 -07:00
virt-v7.c ARM: non-sec: flush code cacheline aligned 2016-08-12 09:22:15 -04:00