u-boot/board/kup/kup4k/kup4k.c
Becky Bruce 9973e3c614 Change initdram() return type to phys_size_t
This patch changes the return type of initdram() from long int to phys_size_t.
This is required for a couple of reasons: long int limits the amount of dram
to 2GB, and u-boot in general is moving over to phys_size_t to represent the
size of physical memory.  phys_size_t is defined as an unsigned long on almost
all current platforms.

This patch *only* changes the return type of the initdram function (in
include/common.h, as well as in each board's implementation of initdram).  It
does not actually modify the code inside the function on any of the platforms;
platforms which wish to support more than 2GB of DRAM will need to modify
their initdram() function code.

Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
MPC8641HPCN.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-12 08:50:18 +02:00

403 lines
11 KiB
C

/*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <mpc8xx.h>
#include "../common/kup.h"
#ifdef CONFIG_KUP4K_LOGO
#include "s1d13706.h"
#endif
DECLARE_GLOBAL_DATA_PTR;
#undef DEBUG
#ifdef DEBUG
# define debugk(fmt,args...) printf(fmt ,##args)
#else
# define debugk(fmt,args...)
#endif
typedef struct {
volatile unsigned char *VmemAddr;
volatile unsigned char *RegAddr;
} FB_INFO_S1D13xxx;
/* ------------------------------------------------------------------------- */
#ifdef CONFIG_KUP4K_LOGO
void lcd_logo(bd_t *bd);
#endif
/* ------------------------------------------------------------------------- */
#define _NOT_USED_ 0xFFFFFFFF
const uint sdram_table[] = {
/*
* Single Read. (Offset 0 in UPMA RAM)
*/
0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
0x1FF77C47, /* last */
/*
* SDRAM Initialization (offset 5 in UPMA RAM)
*
* This is no UPM entry point. The following definition uses
* the remaining space to establish an initialization
* sequence, which is executed by a RUN command.
*
*/
0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */
/*
* Burst Read. (Offset 8 in UPMA RAM)
*/
0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Single Write. (Offset 18 in UPMA RAM)
*/
0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Burst Write. (Offset 20 in UPMA RAM)
*/
0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */
_NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Refresh (Offset 30 in UPMA RAM)
*/
0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
0xFFFFFC84, 0xFFFFFC07, /* last */
_NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Exception. (Offset 3c in UPMA RAM)
*/
0x7FFFFC07, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_,
};
/* ------------------------------------------------------------------------- */
/*
* Check Board Identity:
*/
int checkboard (void)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
uchar *latch,rev,mod;
/*
* Init ChipSelect #4 (CAN + HW-Latch)
*/
immap->im_memctl.memc_or4 = 0xFFFF8926;
immap->im_memctl.memc_br4 = 0x90000401;
__asm__ ("eieio");
latch=(uchar *)0x90000200;
rev = (*latch & 0xF8) >> 3;
mod=(*latch & 0x03);
printf ("Board: KUP4K Rev %d.%d\n",rev,mod);
return (0);
}
/* ------------------------------------------------------------------------- */
phys_size_t initdram (int board_type)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
long int size_b0 = 0;
long int size_b1 = 0;
long int size_b2 = 0;
upmconfig (UPMA, (uint *) sdram_table,
sizeof (sdram_table) / sizeof (uint));
/*
* Preliminary prescaler for refresh (depends on number of
* banks): This value is selected for four cycles every 62.4 us
* with two SDRAM banks or four cycles every 31.2 us with one
* bank. It will be adjusted after memory sizing.
*/
memctl->memc_mptpr = CFG_MPTPR;
memctl->memc_mar = 0x00000088;
/*
* Map controller banks 1 and 2 to the SDRAM banks 2 and 3 at
* preliminary addresses - these have to be modified after the
* SDRAM size has been determined.
*/
/* memctl->memc_or1 = CFG_OR1_PRELIM; */
/* memctl->memc_br1 = CFG_BR1_PRELIM; */
/* memctl->memc_or2 = CFG_OR2_PRELIM; */
/* memctl->memc_br2 = CFG_BR2_PRELIM; */
memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */
udelay (200);
/* perform SDRAM initializsation sequence */
memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */
udelay (1);
memctl->memc_mcr = 0x80002830; /* SDRAM bank 0 - execute twice */
udelay (1);
memctl->memc_mcr = 0x80002106; /* SDRAM bank 0 - RUN MRS Pattern from loc 6 */
udelay (1);
memctl->memc_mcr = 0x80004105; /* SDRAM bank 1 */
udelay (1);
memctl->memc_mcr = 0x80004830; /* SDRAM bank 1 - execute twice */
udelay (1);
memctl->memc_mcr = 0x80004106; /* SDRAM bank 1 - RUN MRS Pattern from loc 6 */
udelay (1);
memctl->memc_mcr = 0x80006105; /* SDRAM bank 2 */
udelay (1);
memctl->memc_mcr = 0x80006830; /* SDRAM bank 2 - execute twice */
udelay (1);
memctl->memc_mcr = 0x80006106; /* SDRAM bank 2 - RUN MRS Pattern from loc 6 */
udelay (1);
memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
udelay (1000);
#if 0 /* 3 x 8MB */
size_b0 = 0x00800000;
size_b1 = 0x00800000;
size_b2 = 0x00800000;
memctl->memc_mptpr = CFG_MPTPR;
udelay (1000);
memctl->memc_or1 = 0xFF800A00;
memctl->memc_br1 = 0x00000081;
memctl->memc_or2 = 0xFF000A00;
memctl->memc_br2 = 0x00800081;
memctl->memc_or3 = 0xFE000A00;
memctl->memc_br3 = 0x01000081;
#else /* 3 x 16 MB */
size_b0 = 0x01000000;
size_b1 = 0x01000000;
size_b2 = 0x01000000;
memctl->memc_mptpr = CFG_MPTPR;
udelay (1000);
memctl->memc_or1 = 0xFF000A00;
memctl->memc_br1 = 0x00000081;
memctl->memc_or2 = 0xFE000A00;
memctl->memc_br2 = 0x01000081;
memctl->memc_or3 = 0xFC000A00;
memctl->memc_br3 = 0x02000081;
#endif
udelay (10000);
return (size_b0 + size_b1 + size_b2);
}
/* ------------------------------------------------------------------------- */
int misc_init_r (void)
{
#ifdef CONFIG_STATUS_LED
volatile immap_t *immap = (immap_t *) CFG_IMMR;
#endif
#ifdef CONFIG_KUP4K_LOGO
bd_t *bd = gd->bd;
lcd_logo (bd);
#endif /* CONFIG_KUP4K_LOGO */
#ifdef CONFIG_IDE_LED
/* Configure PA8 as output port */
immap->im_ioport.iop_padir |= 0x80;
immap->im_ioport.iop_paodr |= 0x80;
immap->im_ioport.iop_papar &= ~0x80;
immap->im_ioport.iop_padat |= 0x80; /* turn it off */
#endif
setenv("hw","4k");
poweron_key();
return (0);
}
#ifdef CONFIG_KUP4K_LOGO
void lcd_logo (bd_t * bd)
{
FB_INFO_S1D13xxx fb_info;
S1D_INDEX s1dReg;
S1D_VALUE s1dValue;
volatile immap_t *immr = (immap_t *) CFG_IMMR;
volatile memctl8xx_t *memctl;
ushort i;
uchar *fb;
int rs, gs, bs;
int r = 8, g = 8, b = 4;
int r1, g1, b1;
int n;
char tmp[64]; /* long enough for environment variables */
int tft = 0;
immr->im_cpm.cp_pbpar &= ~(PB_LCD_PWM);
immr->im_cpm.cp_pbodr &= ~(PB_LCD_PWM);
immr->im_cpm.cp_pbdat &= ~(PB_LCD_PWM); /* set to 0 = enabled */
immr->im_cpm.cp_pbdir |= (PB_LCD_PWM);
/*----------------------------------------------------------------------------- */
/* Initialize the chip and the frame buffer driver. */
/*----------------------------------------------------------------------------- */
memctl = &immr->im_memctl;
/*
* Init ChipSelect #5 (S1D13768)
*/
memctl->memc_or5 = 0xFFC007F0; /* 4 MB 17 WS or externel TA */
memctl->memc_br5 = 0x80080801; /* Start at 0x80080000 */
__asm__ ("eieio");
fb_info.VmemAddr = (unsigned char *) (S1D_PHYSICAL_VMEM_ADDR);
fb_info.RegAddr = (unsigned char *) (S1D_PHYSICAL_REG_ADDR);
if ((((S1D_VALUE *) fb_info.RegAddr)[0] != 0x28)
|| (((S1D_VALUE *) fb_info.RegAddr)[1] != 0x14)) {
printf ("Warning:LCD Controller S1D13706 not found\n");
setenv ("lcd", "none");
return;
}
for (i = 0; i < sizeof(aS1DRegs_prelimn) / sizeof(aS1DRegs_prelimn[0]); i++) {
s1dReg = aS1DRegs_prelimn[i].Index;
s1dValue = aS1DRegs_prelimn[i].Value;
debugk ("s13768 reg: %02x value: %02x\n",
aS1DRegs_prelimn[i].Index, aS1DRegs_prelimn[i].Value);
((S1D_VALUE *) fb_info.RegAddr)[s1dReg / sizeof (S1D_VALUE)] =
s1dValue;
}
n = getenv_r ("lcd", tmp, sizeof (tmp));
if (n > 0) {
if (!strcmp ("tft", tmp))
tft = 1;
else
tft = 0;
}
#if 0
if (((S1D_VALUE *) fb_info.RegAddr)[0xAC] & 0x04)
tft = 0;
else
tft = 1;
#endif
debugk ("Port=0x%02x -> TFT=%d\n", tft,
((S1D_VALUE *) fb_info.RegAddr)[0xAC]);
/* init controller */
if (!tft) {
for (i = 0; i < sizeof(aS1DRegs_stn) / sizeof(aS1DRegs_stn[0]); i++) {
s1dReg = aS1DRegs_stn[i].Index;
s1dValue = aS1DRegs_stn[i].Value;
debugk ("s13768 reg: %02x value: %02x\n",
aS1DRegs_stn[i].Index,
aS1DRegs_stn[i].Value);
((S1D_VALUE *) fb_info.RegAddr)[s1dReg / sizeof(S1D_VALUE)] =
s1dValue;
}
n = getenv_r ("contrast", tmp, sizeof (tmp));
((S1D_VALUE *) fb_info.RegAddr)[0xB3] =
(n > 0) ? (uchar) simple_strtoul (tmp, NULL, 10) * 255 / 100 : 0xA0;
switch (bd->bi_busfreq) {
case 40000000:
((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x41;
break;
case 48000000:
((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x22;
((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x34;
break;
default:
printf ("KUP4K S1D1: unknown busfrequency: %ld assuming 64 MHz\n", bd->bi_busfreq);
case 64000000:
((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x66;
break;
}
/* setenv("lcd","stn"); */
} else {
for (i = 0; i < sizeof(aS1DRegs_tft) / sizeof(aS1DRegs_tft[0]); i++) {
s1dReg = aS1DRegs_tft[i].Index;
s1dValue = aS1DRegs_tft[i].Value;
debugk ("s13768 reg: %02x value: %02x\n",
aS1DRegs_tft[i].Index,
aS1DRegs_tft[i].Value);
((S1D_VALUE *) fb_info.RegAddr)[s1dReg / sizeof (S1D_VALUE)] =
s1dValue;
}
switch (bd->bi_busfreq) {
default:
printf ("KUP4K S1D1: unknown busfrequency: %ld assuming 64 MHz\n", bd->bi_busfreq);
case 40000000:
((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x42;
((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x30;
break;
}
/* setenv("lcd","tft"); */
}
/* create and set colormap */
rs = 256 / (r - 1);
gs = 256 / (g - 1);
bs = 256 / (b - 1);
for (i = 0; i < 256; i++) {
r1 = (rs * ((i / (g * b)) % r)) * 255;
g1 = (gs * ((i / b) % g)) * 255;
b1 = (bs * ((i) % b)) * 255;
debugk ("%d %04x %04x %04x\n", i, r1 >> 4, g1 >> 4, b1 >> 4);
S1D_WRITE_PALETTE (fb_info.RegAddr, i, (r1 >> 4), (g1 >> 4),
(b1 >> 4));
}
/* copy bitmap */
fb = (uchar *) (fb_info.VmemAddr);
memcpy (fb, (uchar *) CONFIG_KUP4K_LOGO, 320 * 240);
}
#endif /* CONFIG_KUP4K_LOGO */