u-boot/board/integratorcp/integratorcp.c
Sergei Poselenov 4265c35fbc ARM: Use do_div() instead of division for "long long".
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-09-09 02:14:41 +02:00

279 lines
6.4 KiB
C

/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
*
* (C) Copyright 2003
* Texas Instruments, <www.ti.com>
* Kshitij Gupta <Kshitij@ti.com>
*
* (C) Copyright 2004
* ARM Ltd.
* Philippe Robin, <philippe.robin@arm.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <div64.h>
DECLARE_GLOBAL_DATA_PTR;
void flash__init (void);
void ether__init (void);
void peripheral_power_enable (void);
#if defined(CONFIG_SHOW_BOOT_PROGRESS)
void show_boot_progress(int progress)
{
printf("Boot reached stage %d\n", progress);
}
#endif
#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
/*
* Miscellaneous platform dependent initialisations
*/
int board_init (void)
{
/* arch number of Integrator Board */
gd->bd->bi_arch_number = MACH_TYPE_CINTEGRATOR;
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x00000100;
gd->flags = 0;
#ifdef CONFIG_CM_REMAP
extern void cm_remap(void);
cm_remap(); /* remaps writeable memory to 0x00000000 */
#endif
icache_enable ();
flash__init ();
ether__init ();
return 0;
}
int misc_init_r (void)
{
setenv("verify", "n");
return (0);
}
/******************************
Routine:
Description:
******************************/
void flash__init (void)
{
}
/*************************************************************
Routine:ether__init
Description: take the Ethernet controller out of reset and wait
for the EEPROM load to complete.
*************************************************************/
void ether__init (void)
{
}
/******************************
Routine:
Description:
******************************/
int dram_init (void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
#ifdef CONFIG_CM_SPD_DETECT
{
extern void dram_query(void);
unsigned long cm_reg_sdram;
unsigned long sdram_shift;
dram_query(); /* Assembler accesses to CM registers */
/* Queries the SPD values */
/* Obtain the SDRAM size from the CM SDRAM register */
cm_reg_sdram = *(volatile ulong *)(CM_BASE + OS_SDRAM);
/* Register SDRAM size
*
* 0xXXXXXXbbb000bb 16 MB
* 0xXXXXXXbbb001bb 32 MB
* 0xXXXXXXbbb010bb 64 MB
* 0xXXXXXXbbb011bb 128 MB
* 0xXXXXXXbbb100bb 256 MB
*
*/
sdram_shift = ((cm_reg_sdram & 0x0000001C)/4)%4;
gd->bd->bi_dram[0].size = 0x01000000 << sdram_shift;
}
#endif /* CM_SPD_DETECT */
return 0;
}
/* The Integrator/CP timer1 is clocked at 1MHz
* can be divided by 16 or 256
* and can be set up as a 32-bit timer
*/
/* U-Boot expects a 32 bit timer, running at CFG_HZ */
/* Keep total timer count to avoid losing decrements < div_timer */
static unsigned long long total_count = 0;
static unsigned long long lastdec; /* Timer reading at last call */
static unsigned long long div_clock = 1; /* Divisor applied to timer clock */
static unsigned long long div_timer = 1; /* Divisor to convert timer reading
* change to U-Boot ticks
*/
/* CFG_HZ = CFG_HZ_CLOCK/(div_clock * div_timer) */
static ulong timestamp; /* U-Boot ticks since startup */
#define TIMER_LOAD_VAL ((ulong)0xFFFFFFFF)
#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+4))
/* all function return values in U-Boot ticks i.e. (1/CFG_HZ) sec
* - unless otherwise stated
*/
/* starts up a counter
* - the Integrator/CP timer can be set up to issue an interrupt */
int interrupt_init (void)
{
/* Load timer with initial value */
*(volatile ulong *)(CFG_TIMERBASE + 0) = TIMER_LOAD_VAL;
/* Set timer to be
* enabled 1
* periodic 1
* no interrupts 0
* X 0
* divider 1 00 == less rounding error
* 32 bit 1
* wrapping 0
*/
*(volatile ulong *)(CFG_TIMERBASE + 8) = 0x000000C2;
/* init the timestamp */
total_count = 0ULL;
reset_timer_masked();
div_timer = (unsigned long long)(CFG_HZ_CLOCK / CFG_HZ);
div_timer /= div_clock;
return (0);
}
/*
* timer without interrupts
*/
void reset_timer (void)
{
reset_timer_masked ();
}
ulong get_timer (ulong base_ticks)
{
return get_timer_masked () - base_ticks;
}
void set_timer (ulong ticks)
{
timestamp = ticks;
total_count = (unsigned long long)ticks * div_timer;
}
/* delay usec useconds */
void udelay (unsigned long usec)
{
ulong tmo, tmp;
/* Convert to U-Boot ticks */
tmo = usec * CFG_HZ;
tmo /= (1000000L);
tmp = get_timer_masked(); /* get current timestamp */
tmo += tmp; /* form target timestamp */
while (get_timer_masked () < tmo) {/* loop till event */
/*NOP*/;
}
}
void reset_timer_masked (void)
{
/* capure current decrementer value */
lastdec = (unsigned long long)READ_TIMER;
/* start "advancing" time stamp from 0 */
timestamp = 0L;
}
/* converts the timer reading to U-Boot ticks */
/* the timestamp is the number of ticks since reset */
ulong get_timer_masked (void)
{
/* get current count */
unsigned long long now = (unsigned long long)READ_TIMER;
if(now > lastdec) {
/* Must have wrapped */
total_count += lastdec + TIMER_LOAD_VAL + 1 - now;
} else {
total_count += lastdec - now;
}
lastdec = now;
/* Reuse "now" */
now = total_count;
do_div(now, div_timer);
timestamp = now;
return timestamp;
}
/* waits specified delay value and resets timestamp */
void udelay_masked (unsigned long usec)
{
udelay(usec);
}
/*
* This function is derived from PowerPC code (read timebase as long long).
* On ARM it just returns the timer value.
*/
unsigned long long get_ticks(void)
{
return (unsigned long long)get_timer(0);
}
/*
* Return the timebase clock frequency
* i.e. how often the timer decrements
*/
ulong get_tbclk (void)
{
return (ulong)(((unsigned long long)CFG_HZ_CLOCK)/div_clock);
}