mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 07:57:21 +00:00
9fc5f9daa1
Cache coherency for SMP is cared by Linux. In U-Boot, the secondary CPU(s) are just sleeping. Nothing in memory is shared with the primary CPU. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
176 lines
4.8 KiB
ArmAsm
176 lines
4.8 KiB
ArmAsm
/*
|
|
* Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <linux/linkage.h>
|
|
#include <linux/sizes.h>
|
|
#include <asm/system.h>
|
|
#include <mach/led.h>
|
|
#include <mach/arm-mpcore.h>
|
|
#include <mach/sbc-regs.h>
|
|
#include <mach/ssc-regs.h>
|
|
|
|
ENTRY(lowlevel_init)
|
|
mov r8, lr @ persevere link reg across call
|
|
|
|
/*
|
|
* The UniPhier Boot ROM loads SPL code to the L2 cache.
|
|
* But CPUs can only do instruction fetch now because start.S has
|
|
* cleared C and M bits.
|
|
* First we need to turn on MMU and Dcache again to get back
|
|
* data access to L2.
|
|
*/
|
|
mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register)
|
|
orr r0, r0, #(CR_C | CR_M) @ enable MMU and Dcache
|
|
mcr p15, 0, r0, c1, c0, 0
|
|
|
|
#ifdef CONFIG_DEBUG_LL
|
|
bl setup_lowlevel_debug
|
|
#endif
|
|
|
|
/*
|
|
* Now we are using the page table embedded in the Boot ROM.
|
|
* It is not handy since it is not a straight mapped table for sLD3.
|
|
* What we need to do next is to switch over to the page table in SPL.
|
|
*/
|
|
ldr r3, =init_page_table @ page table must be 16KB aligned
|
|
|
|
/* Disable MMU and Dcache before switching Page Table */
|
|
mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register)
|
|
bic r0, r0, #(CR_C | CR_M) @ disable MMU and Dcache
|
|
mcr p15, 0, r0, c1, c0, 0
|
|
|
|
bl enable_mmu
|
|
|
|
#ifdef CONFIG_UNIPHIER_SMP
|
|
secondary_startup:
|
|
/*
|
|
* Entry point for secondary CPUs
|
|
*
|
|
* The Boot ROM has already enabled MMU for the secondary CPUs as well
|
|
* as for the primary one. The MMU table embedded in the Boot ROM
|
|
* prohibits the DRAM access, so it is impossible to bring the
|
|
* secondary CPUs into DRAM directly. They must jump here into SPL,
|
|
* which is run on L2 cache.
|
|
*
|
|
* Boot Sequence
|
|
* [primary CPU] [secondary CPUs]
|
|
* start from Boot ROM start from Boot ROM
|
|
* jump to SPL sleep in Boot ROM
|
|
* kick secondaries ---(sev)---> jump to SPL
|
|
* jump to U-Boot main sleep in SPL
|
|
* jump to Linux
|
|
* kick secondaries ---(sev)---> jump to Linux
|
|
*/
|
|
|
|
/* branch by CPU ID */
|
|
mrc p15, 0, r0, c0, c0, 5 @ MPIDR (Multiprocessor Affinity Register)
|
|
and r0, r0, #0x3
|
|
cmp r0, #0x0
|
|
beq primary_cpu
|
|
/* only for secondary CPUs */
|
|
ldr r1, =ROM_BOOT_ROMRSV2 @ The last data access to L2 cache
|
|
mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register)
|
|
orr r0, r0, #CR_I @ Enable ICache
|
|
bic r0, r0, #(CR_C | CR_M) @ MMU and Dcache must be disabled
|
|
mcr p15, 0, r0, c1, c0, 0 @ before jumping to Linux
|
|
mov r0, #0
|
|
str r0, [r1]
|
|
b 1f
|
|
/*
|
|
* L2 cache is shared among all the CPUs and it might be disabled by
|
|
* the primary one. Before that, the following 5 lines must be cached
|
|
* on the Icaches of the secondary CPUs.
|
|
*/
|
|
0: wfe @ kicked by Linux
|
|
1: ldr r0, [r1]
|
|
cmp r0, #0
|
|
bxne r0 @ r0: Linux entry for secondary CPUs
|
|
b 0b
|
|
primary_cpu:
|
|
ldr r1, =ROM_BOOT_ROMRSV2
|
|
ldr r0, =secondary_startup
|
|
str r0, [r1]
|
|
ldr r0, [r1] @ make sure str is complete before sev
|
|
sev @ kick the secondary CPU
|
|
#endif
|
|
|
|
bl setup_init_ram @ RAM area for temporary stack pointer
|
|
|
|
mov lr, r8 @ restore link
|
|
mov pc, lr @ back to my caller
|
|
ENDPROC(lowlevel_init)
|
|
|
|
ENTRY(enable_mmu)
|
|
mrc p15, 0, r0, c2, c0, 2 @ TTBCR (Translation Table Base Control Register)
|
|
bic r0, r0, #0x37
|
|
orr r0, r0, #0x20 @ disable TTBR1
|
|
mcr p15, 0, r0, c2, c0, 2
|
|
|
|
orr r0, r3, #0x8 @ Outer Cacheability for table walks: WBWA
|
|
mcr p15, 0, r0, c2, c0, 0 @ TTBR0
|
|
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c8, c7, 0 @ invalidate TLBs
|
|
|
|
mov r0, #-1 @ manager for all domains (No permission check)
|
|
mcr p15, 0, r0, c3, c0, 0 @ DACR (Domain Access Control Register)
|
|
|
|
dsb
|
|
isb
|
|
/*
|
|
* MMU on:
|
|
* TLBs was already invalidated in "../start.S"
|
|
* So, we don't need to invalidate it here.
|
|
*/
|
|
mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register)
|
|
orr r0, r0, #(CR_C | CR_M) @ MMU and Dcache enable
|
|
mcr p15, 0, r0, c1, c0, 0
|
|
|
|
mov pc, lr
|
|
ENDPROC(enable_mmu)
|
|
|
|
/*
|
|
* For PH1-Pro4 or older SoCs, the size of WAY is 32KB.
|
|
* It is large enough for tmp RAM.
|
|
*/
|
|
#define BOOT_RAM_SIZE (SZ_32K)
|
|
#define BOOT_WAY_BITS (0x00000100) /* way 8 */
|
|
|
|
ENTRY(setup_init_ram)
|
|
/*
|
|
* Touch to zero for the boot way
|
|
*/
|
|
0:
|
|
/*
|
|
* set SSCOQM, SSCOQAD, SSCOQSZ, SSCOQWN in this order
|
|
*/
|
|
ldr r0, = 0x00408006 @ touch to zero with address range
|
|
ldr r1, = SSCOQM
|
|
str r0, [r1]
|
|
ldr r0, = (CONFIG_SPL_STACK - BOOT_RAM_SIZE) @ base address
|
|
ldr r1, = SSCOQAD
|
|
str r0, [r1]
|
|
ldr r0, = BOOT_RAM_SIZE
|
|
ldr r1, = SSCOQSZ
|
|
str r0, [r1]
|
|
ldr r0, = BOOT_WAY_BITS
|
|
ldr r1, = SSCOQWN
|
|
str r0, [r1]
|
|
ldr r1, = SSCOPPQSEF
|
|
ldr r0, [r1]
|
|
cmp r0, #0 @ check if the command is successfully set
|
|
bne 0b @ try again if an error occurs
|
|
|
|
ldr r1, = SSCOLPQS
|
|
1:
|
|
ldr r0, [r1]
|
|
cmp r0, #0x4
|
|
bne 1b @ wait until the operation is completed
|
|
str r0, [r1] @ clear the complete notification flag
|
|
|
|
mov pc, lr
|
|
ENDPROC(setup_init_ram)
|