u-boot/arch/arm/dts/stm32f7-u-boot.dtsi
Patrice Chotard 9f603e2fff ARM: dts: stm32: DT sync with kernel v6.0-rc4 for MCU's boards
Device tree alignment with kernel v6.0-rc4.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-09-26 15:19:57 +02:00

129 lines
2 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
#include <dt-bindings/memory/stm32-sdram.h>
/{
soc {
u-boot,dm-pre-reloc;
fmc: fmc@A0000000 {
compatible = "st,stm32-fmc";
reg = <0xa0000000 0x1000>;
clocks = <&rcc 0 STM32F7_AHB3_CLOCK(FMC)>;
pinctrl-0 = <&fmc_pins>;
pinctrl-names = "default";
status = "okay";
u-boot,dm-pre-reloc;
};
mac: ethernet@40028000 {
compatible = "st,stm32-dwmac";
reg = <0x40028000 0x8000>;
reg-names = "stmmaceth";
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(ETHMAC)>,
<&rcc 0 STM32F7_AHB1_CLOCK(ETHMACTX)>,
<&rcc 0 STM32F7_AHB1_CLOCK(ETHMACRX)>;
interrupts = <61>, <62>;
interrupt-names = "macirq", "eth_wake_irq";
snps,pbl = <8>;
snps,mixed-burst;
pinctrl-0 = <&ethernet_mii>;
phy-mode = "rmii";
phy-handle = <&phy0>;
status = "okay";
mdio0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
};
qspi: spi@A0001000 {
compatible = "st,stm32f469-qspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xa0001000 0x1000>, <0x90000000 0x10000000>;
reg-names = "qspi", "qspi_mm";
interrupts = <92>;
spi-max-frequency = <108000000>;
clocks = <&rcc 0 STM32F7_AHB3_CLOCK(QSPI)>;
resets = <&rcc STM32F7_AHB3_RESET(QSPI)>;
pinctrl-0 = <&qspi_pins>;
status = "okay";
};
};
};
&clk_hse {
u-boot,dm-pre-reloc;
};
&gpioa {
u-boot,dm-pre-reloc;
};
&gpiob {
u-boot,dm-pre-reloc;
};
&gpioc {
u-boot,dm-pre-reloc;
};
&gpiod {
u-boot,dm-pre-reloc;
};
&gpioe {
u-boot,dm-pre-reloc;
};
&gpiof {
u-boot,dm-pre-reloc;
};
&gpiog {
u-boot,dm-pre-reloc;
};
&gpioh {
u-boot,dm-pre-reloc;
};
&gpioi {
u-boot,dm-pre-reloc;
};
&pinctrl {
u-boot,dm-pre-reloc;
fmc_pins: fmc@0 {
u-boot,dm-pre-reloc;
pins
{
u-boot,dm-pre-reloc;
};
};
};
&pwrcfg {
u-boot,dm-pre-reloc;
};
&rcc {
u-boot,dm-pre-reloc;
};
&timers5 {
u-boot,dm-pre-reloc;
};
&usart1 {
u-boot,dm-pre-reloc;
clocks = <&rcc 0 STM32F7_APB2_CLOCK(USART1)>;
};