u-boot/configs/imx6qdl_icore_mipi_defconfig
Tom Rini 86cf1c8285 configs: Migrate CONFIG_NR_DRAM_BANKS
We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
  CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
  2), set this to 8.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-16 16:45:02 -04:00

54 lines
1.3 KiB
Text

CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_SYS_TEXT_BASE=0x17800000
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_MX6Q_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_DEBUG_UART_BASE=0x021f0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_LIBDISK_SUPPORT=y
# CONFIG_CMD_BMODE is not set
CONFIG_DEFAULT_DEVICE_TREE="imx6q-icore-mipi"
CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_IMAGE_FORMAT_LEGACY=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="icorem6qdl-mipi> "
CONFIG_CRC32_VERIFY=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_LIST="imx6q-icore-mipi imx6dl-icore-mipi"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_I2C_MXC=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_SMSC=y
CONFIG_FEC_MXC=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_DEBUG_UART_MXC=y
CONFIG_MXC_UART=y
CONFIG_IMX_THERMAL=y