mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
8a8d24bdf1
Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org>
598 lines
18 KiB
C
598 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Video driver for Marvell Armada XP SoC
|
|
*
|
|
* Initialization of LCD interface and setup of SPLASH screen image
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <part.h>
|
|
#include <video.h>
|
|
#include <asm/cache.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mbus.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/soc.h>
|
|
|
|
#define MVEBU_LCD_WIN_CONTROL(w) (0xf000 + ((w) << 4))
|
|
#define MVEBU_LCD_WIN_BASE(w) (0xf004 + ((w) << 4))
|
|
#define MVEBU_LCD_WIN_REMAP(w) (0xf00c + ((w) << 4))
|
|
|
|
#define MVEBU_LCD_CFG_DMA_START_ADDR_0 0x00cc
|
|
#define MVEBU_LCD_CFG_DMA_START_ADDR_1 0x00dc
|
|
|
|
#define MVEBU_LCD_CFG_GRA_START_ADDR0 0x00f4
|
|
#define MVEBU_LCD_CFG_GRA_START_ADDR1 0x00f8
|
|
#define MVEBU_LCD_CFG_GRA_PITCH 0x00fc
|
|
#define MVEBU_LCD_SPU_GRA_OVSA_HPXL_VLN 0x0100
|
|
#define MVEBU_LCD_SPU_GRA_HPXL_VLN 0x0104
|
|
#define MVEBU_LCD_SPU_GZM_HPXL_VLN 0x0108
|
|
#define MVEBU_LCD_SPU_HWC_OVSA_HPXL_VLN 0x010c
|
|
#define MVEBU_LCD_SPU_HWC_HPXL_VLN 0x0110
|
|
#define MVEBU_LCD_SPUT_V_H_TOTAL 0x0114
|
|
#define MVEBU_LCD_SPU_V_H_ACTIVE 0x0118
|
|
#define MVEBU_LCD_SPU_H_PORCH 0x011c
|
|
#define MVEBU_LCD_SPU_V_PORCH 0x0120
|
|
#define MVEBU_LCD_SPU_BLANKCOLOR 0x0124
|
|
#define MVEBU_LCD_SPU_ALPHA_COLOR1 0x0128
|
|
#define MVEBU_LCD_SPU_ALPHA_COLOR2 0x012c
|
|
#define MVEBU_LCD_SPU_COLORKEY_Y 0x0130
|
|
#define MVEBU_LCD_SPU_COLORKEY_U 0x0134
|
|
#define MVEBU_LCD_SPU_COLORKEY_V 0x0138
|
|
#define MVEBU_LCD_CFG_RDREG4F 0x013c
|
|
#define MVEBU_LCD_SPU_SPI_RXDATA 0x0140
|
|
#define MVEBU_LCD_SPU_ISA_RXDATA 0x0144
|
|
#define MVEBU_LCD_SPU_DBG_ISA 0x0148
|
|
|
|
#define MVEBU_LCD_SPU_HWC_RDDAT 0x0158
|
|
#define MVEBU_LCD_SPU_GAMMA_RDDAT 0x015c
|
|
#define MVEBU_LCD_SPU_PALETTE_RDDAT 0x0160
|
|
#define MVEBU_LCD_SPU_IOPAD_IN 0x0178
|
|
#define MVEBU_LCD_FRAME_COUNT 0x017c
|
|
#define MVEBU_LCD_SPU_DMA_CTRL0 0x0190
|
|
#define MVEBU_LCD_SPU_DMA_CTRL1 0x0194
|
|
#define MVEBU_LCD_SPU_SRAM_CTRL 0x0198
|
|
#define MVEBU_LCD_SPU_SRAM_WRDAT 0x019c
|
|
#define MVEBU_LCD_SPU_SRAM_PARA0 0x01a0
|
|
#define MVEBU_LCD_SPU_SRAM_PARA1 0x01a4
|
|
#define MVEBU_LCD_CFG_SCLK_DIV 0x01a8
|
|
#define MVEBU_LCD_SPU_CONTRAST 0x01ac
|
|
#define MVEBU_LCD_SPU_SATURATION 0x01b0
|
|
#define MVEBU_LCD_SPU_CBSH_HUE 0x01b4
|
|
#define MVEBU_LCD_SPU_DUMB_CTRL 0x01b8
|
|
#define MVEBU_LCD_SPU_IOPAD_CONTROL 0x01bc
|
|
#define MVEBU_LCD_SPU_IRQ_ENA_2 0x01d8
|
|
#define MVEBU_LCD_SPU_IRQ_ISR_2 0x01dc
|
|
#define MVEBU_LCD_SPU_IRQ_ENA 0x01c0
|
|
#define MVEBU_LCD_SPU_IRQ_ISR 0x01c4
|
|
#define MVEBU_LCD_ADLL_CTRL 0x01c8
|
|
#define MVEBU_LCD_CLK_DIS 0x01cc
|
|
#define MVEBU_LCD_VGA_HVSYNC_DELAY 0x01d4
|
|
#define MVEBU_LCD_CLK_CFG_0 0xf0a0
|
|
#define MVEBU_LCD_CLK_CFG_1 0xf0a4
|
|
#define MVEBU_LCD_LVDS_CLK_CFG 0xf0ac
|
|
|
|
#define MVEBU_LVDS_PADS_REG (MVEBU_SYSTEM_REG_BASE + 0xf0)
|
|
|
|
enum {
|
|
/* Maximum LCD size we support */
|
|
LCD_MAX_WIDTH = 640,
|
|
LCD_MAX_HEIGHT = 480,
|
|
LCD_MAX_LOG2_BPP = VIDEO_BPP16,
|
|
};
|
|
|
|
struct mvebu_lcd_info {
|
|
u32 fb_base;
|
|
int x_res;
|
|
int y_res;
|
|
int x_fp;
|
|
int y_fp;
|
|
int x_bp;
|
|
int y_bp;
|
|
};
|
|
|
|
struct mvebu_video_priv {
|
|
uintptr_t regs;
|
|
};
|
|
|
|
/* Setup Mbus Bridge Windows for LCD */
|
|
static void mvebu_lcd_conf_mbus_registers(uintptr_t regs)
|
|
{
|
|
const struct mbus_dram_target_info *dram;
|
|
int i;
|
|
|
|
dram = mvebu_mbus_dram_info();
|
|
|
|
/* Disable windows, set size/base/remap to 0 */
|
|
for (i = 0; i < 6; i++) {
|
|
writel(0, regs + MVEBU_LCD_WIN_CONTROL(i));
|
|
writel(0, regs + MVEBU_LCD_WIN_BASE(i));
|
|
writel(0, regs + MVEBU_LCD_WIN_REMAP(i));
|
|
}
|
|
|
|
/* Write LCD bridge window registers */
|
|
for (i = 0; i < dram->num_cs; i++) {
|
|
const struct mbus_dram_window *cs = dram->cs + i;
|
|
writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
|
|
(dram->mbus_dram_target_id << 4) | 1,
|
|
regs + MVEBU_LCD_WIN_CONTROL(i));
|
|
|
|
writel(cs->base & 0xffff0000, regs + MVEBU_LCD_WIN_BASE(i));
|
|
}
|
|
}
|
|
|
|
/* Initialize LCD registers */
|
|
static void mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info,
|
|
uintptr_t regs)
|
|
{
|
|
/* Local variable for easier handling */
|
|
int x = lcd_info->x_res;
|
|
int y = lcd_info->y_res;
|
|
u32 val;
|
|
|
|
/* Setup Mbus Bridge Windows */
|
|
mvebu_lcd_conf_mbus_registers(regs);
|
|
|
|
/*
|
|
* Set LVDS Pads Control Register
|
|
* wr 0 182F0 FFE00000
|
|
*/
|
|
clrbits_le32(MVEBU_LVDS_PADS_REG, 0x1f << 16);
|
|
|
|
/*
|
|
* Set the LCD_CFG_GRA_START_ADDR0/1 Registers
|
|
* This is supposed to point to the "physical" memory at memory
|
|
* end (currently 1GB-64MB but also may be 2GB-64MB).
|
|
* See also the Window 0 settings!
|
|
*/
|
|
writel(lcd_info->fb_base, regs + MVEBU_LCD_CFG_GRA_START_ADDR0);
|
|
writel(lcd_info->fb_base, regs + MVEBU_LCD_CFG_GRA_START_ADDR1);
|
|
|
|
/*
|
|
* Set the LCD_CFG_GRA_PITCH Register
|
|
* Bits 31-28: Duty Cycle of Backlight. value/16=High (0x8=Mid Setting)
|
|
* Bits 25-16: Backlight divider from 32kHz Clock
|
|
* (here 16=0x10 for 1kHz)
|
|
* Bits 15-00: Line Length in Bytes
|
|
* 240*2 (for RGB1555)=480=0x1E0
|
|
*/
|
|
writel(0x80100000 + 2 * x, regs + MVEBU_LCD_CFG_GRA_PITCH);
|
|
|
|
/*
|
|
* Set the LCD_SPU_GRA_OVSA_HPXL_VLN Register
|
|
* Bits 31-16: Vertical start of graphical overlay on screen
|
|
* Bits 15-00: Horizontal start of graphical overlay on screen
|
|
*/
|
|
writel(0x00000000, regs + MVEBU_LCD_SPU_GRA_OVSA_HPXL_VLN);
|
|
|
|
/*
|
|
* Set the LCD_SPU_GRA_HPXL_VLN Register
|
|
* Bits 31-16: Vertical size of graphical overlay 320=0x140
|
|
* Bits 15-00: Horizontal size of graphical overlay 240=0xF0
|
|
* Values before zooming
|
|
*/
|
|
writel((y << 16) | x, regs + MVEBU_LCD_SPU_GRA_HPXL_VLN);
|
|
|
|
/*
|
|
* Set the LCD_SPU_GZM_HPXL_VLN Register
|
|
* Bits 31-16: Vertical size of graphical overlay 320=0x140
|
|
* Bits 15-00: Horizontal size of graphical overlay 240=0xF0
|
|
* Values after zooming
|
|
*/
|
|
writel((y << 16) | x, regs + MVEBU_LCD_SPU_GZM_HPXL_VLN);
|
|
|
|
/*
|
|
* Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register
|
|
* Bits 31-16: Vertical position of HW Cursor 320=0x140
|
|
* Bits 15-00: Horizontal position of HW Cursor 240=0xF0
|
|
*/
|
|
writel((y << 16) | x, regs + MVEBU_LCD_SPU_HWC_OVSA_HPXL_VLN);
|
|
|
|
/*
|
|
* Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register
|
|
* Bits 31-16: Vertical size of HW Cursor
|
|
* Bits 15-00: Horizontal size of HW Cursor
|
|
*/
|
|
writel(0x00000000, regs + MVEBU_LCD_SPU_HWC_HPXL_VLN);
|
|
|
|
/*
|
|
* Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register
|
|
* Bits 31-16: Screen total vertical lines:
|
|
* VSYNC = 1
|
|
* Vertical Front Porch = 2
|
|
* Vertical Lines = 320
|
|
* Vertical Back Porch = 2
|
|
* SUM = 325 = 0x0145
|
|
* Bits 15-00: Screen total horizontal pixels:
|
|
* HSYNC = 1
|
|
* Horizontal Front Porch = 44
|
|
* Horizontal Lines = 240
|
|
* Horizontal Back Porch = 2
|
|
* SUM = 287 = 0x011F
|
|
* Note: For the display the backporch is between SYNC and
|
|
* the start of the pixels.
|
|
* This is not certain for the Marvell (!?)
|
|
*/
|
|
val = ((y + lcd_info->y_fp + lcd_info->y_bp + 1) << 16) |
|
|
(x + lcd_info->x_fp + lcd_info->x_bp + 1);
|
|
writel(val, regs + MVEBU_LCD_SPUT_V_H_TOTAL);
|
|
|
|
/*
|
|
* Set the LCD_SPU_V_H_ACTIVE Register
|
|
* Bits 31-16: Screen active vertical lines 320=0x140
|
|
* Bits 15-00: Screen active horizontakl pixels 240=0x00F0
|
|
*/
|
|
writel((y << 16) | x, regs + MVEBU_LCD_SPU_V_H_ACTIVE);
|
|
|
|
/*
|
|
* Set the LCD_SPU_H_PORCH Register
|
|
* Bits 31-16: Screen horizontal backporch 44=0x2c
|
|
* Bits 15-00: Screen horizontal frontporch 2=0x02
|
|
* Note: The terms "front" and "back" for the Marvell seem to be
|
|
* exactly opposite to the display.
|
|
*/
|
|
writel((lcd_info->x_fp << 16) | lcd_info->x_bp,
|
|
regs + MVEBU_LCD_SPU_H_PORCH);
|
|
|
|
/*
|
|
* Set the LCD_SPU_V_PORCH Register
|
|
* Bits 31-16: Screen vertical backporch 2=0x02
|
|
* Bits 15-00: Screen vertical frontporch 2=0x02
|
|
* Note: The terms "front" and "back" for the Marvell seem to be exactly
|
|
* opposite to the display.
|
|
*/
|
|
writel((lcd_info->y_fp << 16) | lcd_info->y_bp,
|
|
regs + MVEBU_LCD_SPU_V_PORCH);
|
|
|
|
/*
|
|
* Set the LCD_SPU_BLANKCOLOR Register
|
|
* This should be black = 0
|
|
* For tests this is magenta=00FF00FF
|
|
*/
|
|
writel(0x00FF00FF, regs + MVEBU_LCD_SPU_BLANKCOLOR);
|
|
|
|
/*
|
|
* Registers in the range of 0x0128 to 0x012C are colors for the cursor
|
|
* Registers in the range of 0x0130 to 0x0138 are colors for video
|
|
* color keying
|
|
*/
|
|
|
|
/*
|
|
* Set the LCD_SPU_RDREG4F Register
|
|
* Bits 31-12: Reservd
|
|
* Bit 11: SRAM Wait
|
|
* Bit 10: Smart display fast TX (must be 1)
|
|
* Bit 9: DMA Arbitration Video/Graphics overlay: 0=interleaved
|
|
* Bit 8: FIFO watermark for DMA: 0=disable
|
|
* Bits 07-00: Empty 8B FIFO entries to trigger DMA, default=0x80
|
|
*/
|
|
writel(0x00000780, regs + MVEBU_LCD_CFG_RDREG4F);
|
|
|
|
/*
|
|
* Set the LCD_SPU_DMACTRL 0 Register
|
|
* Bit 31: Disable overlay blending 1=disable
|
|
* Bit 30: Gamma correction enable, 0=disable
|
|
* Bit 29: Video Contrast/Saturation/Hue Adjust enable, 0=disable
|
|
* Bit 28: Color palette enable, 0=disable
|
|
* Bit 27: DMA AXI Arbiter, 1=default
|
|
* Bit 26: HW Cursor 1-bit mode
|
|
* Bit 25: HW Cursor or 1- or 2-bit mode
|
|
* Bit 24: HW Cursor enabled, 0=disable
|
|
* Bits 23-20: Graphics Memory Color Format: 0x1=RGB1555
|
|
* Bits 19-16: Video Memory Color Format: 0x1=RGB1555
|
|
* Bit 15: Memory Toggle between frame 0 and 1: 0=disable
|
|
* Bit 14: Graphics horizontal scaling enable: 0=disable
|
|
* Bit 13: Graphics test mode: 0=disable
|
|
* Bit 12: Graphics SWAP R and B: 0=disable
|
|
* Bit 11: Graphics SWAP U and V: 0=disable
|
|
* Bit 10: Graphics SWAP Y and U/V: 0=disable
|
|
* Bit 09: Graphic YUV to RGB Conversion: 0=disable
|
|
* Bit 08: Graphic Transfer: 1=enable
|
|
* Bit 07: Memory Toggle: 0=disable
|
|
* Bit 06: Video horizontal scaling enable: 0=disable
|
|
* Bit 05: Video test mode: 0=disable
|
|
* Bit 04: Video SWAP R and B: 0=disable
|
|
* Bit 03: Video SWAP U and V: 0=disable
|
|
* Bit 02: Video SWAP Y and U/V: 0=disable
|
|
* Bit 01: Video YUV to RGB Conversion: 0=disable
|
|
* Bit 00: Video Transfer: 0=disable
|
|
*/
|
|
writel(0x88111100, regs + MVEBU_LCD_SPU_DMA_CTRL0);
|
|
|
|
/*
|
|
* Set the LCD_SPU_DMA_CTRL1 Register
|
|
* Bit 31: Manual DMA Trigger = 0
|
|
* Bits 30-28: DMA Trigger Source: 0x2 VSYNC
|
|
* Bit 28: VSYNC_INV: 0=Rising Edge, 1=Falling Edge
|
|
* Bits 26-24: Color Key Mode: 0=disable
|
|
* Bit 23: Fill low bits: 0=fill with zeroes
|
|
* Bit 22: Reserved
|
|
* Bit 21: Gated Clock: 0=disable
|
|
* Bit 20: Power Save enable: 0=disable
|
|
* Bits 19-18: Reserved
|
|
* Bits 17-16: Configure Video/Graphic Path: 0x1: Graphic path alpha.
|
|
* Bits 15-08: Configure Alpha: 0x00.
|
|
* Bits 07-00: Reserved.
|
|
*/
|
|
writel(0x20010000, regs + MVEBU_LCD_SPU_DMA_CTRL1);
|
|
|
|
/*
|
|
* Set the LCD_SPU_SRAM_CTRL Register
|
|
* Reset to default = 0000C000
|
|
* Bits 15-14: SRAM control: init=0x3, Read=0, Write=2
|
|
* Bits 11-08: SRAM address ID: 0=gamma_yr, 1=gammy_ug, 2=gamma_vb,
|
|
* 3=palette, 15=cursor
|
|
*/
|
|
writel(0x0000C000, regs + MVEBU_LCD_SPU_SRAM_CTRL);
|
|
|
|
/*
|
|
* LCD_SPU_SRAM_WRDAT register: 019C
|
|
* LCD_SPU_SRAM_PARA0 register: 01A0
|
|
* LCD_SPU_SRAM_PARA1 register: 01A4 - Cursor control/Power settings
|
|
*/
|
|
writel(0x00000000, regs + MVEBU_LCD_SPU_SRAM_PARA1);
|
|
|
|
|
|
/* Clock settings in the at 01A8 and in the range F0A0 see below */
|
|
|
|
/*
|
|
* Set LCD_SPU_CONTRAST
|
|
* Bits 31-16: Brightness sign ext. 8-bit value +255 to -255: default=0
|
|
* Bits 15-00: Contrast sign ext. 8-bit value +255 to -255: default=0
|
|
*/
|
|
writel(0x00000000, regs + MVEBU_LCD_SPU_CONTRAST);
|
|
|
|
/*
|
|
* Set LCD_SPU_SATURATION
|
|
* Bits 31-16: Multiplier signed 4.12 fixed point value
|
|
* Bits 15-00: Saturation signed 4.12 fixed point value
|
|
*/
|
|
writel(0x10001000, regs + MVEBU_LCD_SPU_SATURATION);
|
|
|
|
/*
|
|
* Set LCD_SPU_HUE
|
|
* Bits 31-16: Sine signed 2.14 fixed point value
|
|
* Bits 15-00: Cosine signed 2.14 fixed point value
|
|
*/
|
|
writel(0x00000000, regs + MVEBU_LCD_SPU_CBSH_HUE);
|
|
|
|
/*
|
|
* Set LCD_SPU_DUMB_CTRL
|
|
* Bits 31-28: LCD Type: 3=18 bit RGB | 6=24 bit RGB888
|
|
* Bits 27-12: Reserved
|
|
* Bit 11: LCD DMA Pipeline Enable: 1=Enable
|
|
* Bits 10-09: Reserved
|
|
* Bit 8: LCD GPIO pin (??)
|
|
* Bit 7: Reverse RGB
|
|
* Bit 6: Invert composite blank signal DE/EN (??)
|
|
* Bit 5: Invert composite sync signal
|
|
* Bit 4: Invert Pixel Valid Enable DE/EN (??)
|
|
* Bit 3: Invert VSYNC
|
|
* Bit 2: Invert HSYNC
|
|
* Bit 1: Invert Pixel Clock
|
|
* Bit 0: Enable LCD Panel: 1=Enable
|
|
* Question: Do we have to disable Smart and Dumb LCD
|
|
* and separately enable LVDS?
|
|
*/
|
|
writel(0x6000080F, regs + MVEBU_LCD_SPU_DUMB_CTRL);
|
|
|
|
/*
|
|
* Set LCD_SPU_IOPAD_CTRL
|
|
* Bits 31-20: Reserved
|
|
* Bits 19-18: Vertical Interpolation: 0=Disable
|
|
* Bits 17-16: Reserved
|
|
* Bit 15: Graphics Vertical Mirror enable: 0=disable
|
|
* Bit 14: Reserved
|
|
* Bit 13: Video Vertical Mirror enable: 0=disable
|
|
* Bit 12: Reserved
|
|
* Bit 11: Command Vertical Mirror enable: 0=disable
|
|
* Bit 10: Reserved
|
|
* Bits 09-08: YUV to RGB Color space conversion: 0 (Not used)
|
|
* Bits 07-04: AXI Bus Master: 0x4: no crossing of 4k boundary,
|
|
* 128 Bytes burst
|
|
* Bits 03-00: LCD pins: ??? 0=24-bit Dump panel ??
|
|
*/
|
|
writel(0x000000C0, regs + MVEBU_LCD_SPU_IOPAD_CONTROL);
|
|
|
|
/*
|
|
* Set SUP_IRQ_ENA_2: Disable all interrupts
|
|
*/
|
|
writel(0x00000000, regs + MVEBU_LCD_SPU_IRQ_ENA_2);
|
|
|
|
/*
|
|
* Set SUP_IRQ_ENA: Disable all interrupts.
|
|
*/
|
|
writel(0x00000000, regs + MVEBU_LCD_SPU_IRQ_ENA);
|
|
|
|
/*
|
|
* Set up ADDL Control Register
|
|
* Bits 31-29: 0x0 = Fastest Delay Line (default)
|
|
* 0x3 = Slowest Delay Line (default)
|
|
* Bit 28: Calibration done status.
|
|
* Bit 27: Reserved
|
|
* Bit 26: Set Pixel Clock to ADDL output
|
|
* Bit 25: Reduce CAL Enable
|
|
* Bits 24-22: Manual calibration value.
|
|
* Bit 21: Manual calibration enable.
|
|
* Bit 20: Restart Auto Cal
|
|
* Bits 19-16: Calibration Threshold voltage, default= 0x2
|
|
* Bite 15-14: Reserved
|
|
* Bits 13-11: Divisor for ADDL Clock: 0x1=/2, 0x3=/8, 0x5=/16
|
|
* Bit 10: Power Down ADDL module, default = 1!
|
|
* Bits 09-08: Test point configuration: 0x2=Bias, 0x3=High-z
|
|
* Bit 07: Reset ADDL
|
|
* Bit 06: Invert ADLL Clock
|
|
* Bits 05-00: Delay taps, 0x3F=Half Cycle, 0x00=No delay
|
|
* Note: ADLL is used for a VGA interface with DAC - not used here
|
|
*/
|
|
writel(0x00000000, regs + MVEBU_LCD_ADLL_CTRL);
|
|
|
|
/*
|
|
* Set the LCD_CLK_DIS Register:
|
|
* Bits 3 and 4 must be 1
|
|
*/
|
|
writel(0x00000018, regs + MVEBU_LCD_CLK_DIS);
|
|
|
|
/*
|
|
* Set the LCD_VGA_HSYNC/VSYNC Delay Register:
|
|
* Bits 03-00: Sets the delay for the HSYNC and VSYNC signals
|
|
*/
|
|
writel(0x00000000, regs + MVEBU_LCD_VGA_HVSYNC_DELAY);
|
|
|
|
/*
|
|
* Clock registers
|
|
* See page 475 in the functional spec.
|
|
*/
|
|
|
|
/* Step 1 and 2: Disable the PLL */
|
|
|
|
/*
|
|
* Disable PLL, see "LCD Clock Configuration 1 Register" below
|
|
*/
|
|
writel(0x8FF40007, regs + MVEBU_LCD_CLK_CFG_1);
|
|
|
|
/*
|
|
* Powerdown, see "LCD Clock Configuration 0 Register" below
|
|
*/
|
|
writel(0x94000174, regs + MVEBU_LCD_CLK_CFG_0);
|
|
|
|
/*
|
|
* Set the LCD_CFG_SCLK_DIV Register
|
|
* This is set fix to 0x40000001 for the LVDS output:
|
|
* Bits 31-30: SCLCK Source: 0=AXIBus, 1=AHBus, 2=PLLDivider0
|
|
* Bits 15-01: Clock Divider: Bypass for LVDS=0x0001
|
|
* See page 475 in section 28.5.
|
|
*/
|
|
writel(0x80000001, regs + MVEBU_LCD_CFG_SCLK_DIV);
|
|
|
|
/*
|
|
* Set the LCD Clock Configuration 0 Register:
|
|
* Bit 31: Powerdown: 0=Power up
|
|
* Bits 30-29: Reserved
|
|
* Bits 28-26: PLL_KDIV: This encodes K
|
|
* K=16 => 0x5
|
|
* Bits 25-17: PLL_MDIV: This is M-1:
|
|
* M=1 => 0x0
|
|
* Bits 16-13: VCO band: 0x1 for 700-920MHz
|
|
* Bits 12-04: PLL_NDIV: This is N-1 and corresponds to R1_CTRL!
|
|
* N=28=0x1C => 0x1B
|
|
* Bits 03-00: R1_CTRL (for N=28 => 0x4)
|
|
*/
|
|
writel(0x940021B4, regs + MVEBU_LCD_CLK_CFG_0);
|
|
|
|
/*
|
|
* Set the LCD Clock Configuration 1 Register:
|
|
* Bits 31-19: Reserved
|
|
* Bit 18: Select PLL: Core PLL, 1=Dedicated PPL
|
|
* Bit 17: Clock Output Enable: 0=disable, 1=enable
|
|
* Bit 16: Select RefClk: 0=RefClk (25MHz), 1=External
|
|
* Bit 15: Half-Div, Device Clock by DIV+0.5*Half-Dev
|
|
* Bits 14-13: Reserved
|
|
* Bits 12-00: PLL Full Divider [Note: Assumed to be the Post-Divider
|
|
* M' for LVDS=7!]
|
|
*/
|
|
writel(0x8FF40007, regs + MVEBU_LCD_CLK_CFG_1);
|
|
|
|
/*
|
|
* Set the LVDS Clock Configuration Register:
|
|
* Bit 31: Clock Gating for the input clock to the LVDS
|
|
* Bit 30: LVDS Serializer enable: 1=Enabled
|
|
* Bits 29-11: Reserved
|
|
* Bit 11-08: LVDS Clock delay: 0x02 (default): by 2 pixel clock/7
|
|
* Bits 07-02: Reserved
|
|
* Bit 01: 24bbp Option: 0=Option_1,1=Option2
|
|
* Bit 00: 1=24bbp Panel: 0=18bpp Panel
|
|
* Note: Bits 0 and must be verified with the help of the
|
|
* Interface/display
|
|
*/
|
|
writel(0xC0000201, regs + MVEBU_LCD_LVDS_CLK_CFG);
|
|
|
|
/*
|
|
* Power up PLL (Clock Config 0)
|
|
*/
|
|
writel(0x140021B4, regs + MVEBU_LCD_CLK_CFG_0);
|
|
|
|
/* wait 10 ms */
|
|
mdelay(10);
|
|
|
|
/*
|
|
* Enable PLL (Clock Config 1)
|
|
*/
|
|
writel(0x8FF60007, regs + MVEBU_LCD_CLK_CFG_1);
|
|
}
|
|
|
|
static int mvebu_video_probe(struct udevice *dev)
|
|
{
|
|
struct video_uc_plat *plat = dev_get_uclass_plat(dev);
|
|
struct video_priv *uc_priv = dev_get_uclass_priv(dev);
|
|
struct mvebu_video_priv *priv = dev_get_priv(dev);
|
|
struct mvebu_lcd_info lcd_info;
|
|
struct display_timing timings;
|
|
u32 fb_start, fb_end;
|
|
int ret;
|
|
|
|
priv->regs = dev_read_addr(dev);
|
|
if (priv->regs == FDT_ADDR_T_NONE) {
|
|
dev_err(dev, "failed to get LCD address\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
ret = ofnode_decode_display_timing(dev_ofnode(dev), 0, &timings);
|
|
if (ret) {
|
|
dev_err(dev, "failed to get any display timings\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Use DT timing (resolution) in internal info struct */
|
|
lcd_info.fb_base = plat->base;
|
|
lcd_info.x_res = timings.hactive.typ;
|
|
lcd_info.x_fp = timings.hfront_porch.typ;
|
|
lcd_info.x_bp = timings.hback_porch.typ;
|
|
lcd_info.y_res = timings.vactive.typ;
|
|
lcd_info.y_fp = timings.vfront_porch.typ;
|
|
lcd_info.y_bp = timings.vback_porch.typ;
|
|
|
|
/* Initialize the LCD controller */
|
|
mvebu_lcd_register_init(&lcd_info, priv->regs);
|
|
|
|
/* Enable dcache for the frame buffer */
|
|
fb_start = plat->base & ~(MMU_SECTION_SIZE - 1);
|
|
fb_end = plat->base + plat->size;
|
|
fb_end = ALIGN(fb_end, 1 << MMU_SECTION_SHIFT);
|
|
mmu_set_region_dcache_behaviour(fb_start, fb_end - fb_start,
|
|
DCACHE_WRITEBACK);
|
|
video_set_flush_dcache(dev, true);
|
|
|
|
uc_priv->xsize = lcd_info.x_res;
|
|
uc_priv->ysize = lcd_info.y_res;
|
|
uc_priv->bpix = VIDEO_BPP16; /* Uses RGB555 format */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvebu_video_bind(struct udevice *dev)
|
|
{
|
|
struct video_uc_plat *plat = dev_get_uclass_plat(dev);
|
|
|
|
plat->size = LCD_MAX_WIDTH * LCD_MAX_HEIGHT *
|
|
(1 << LCD_MAX_LOG2_BPP) / 8;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id mvebu_video_ids[] = {
|
|
{ .compatible = "marvell,armada-xp-lcd" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(mvebu_video) = {
|
|
.name = "mvebu_video",
|
|
.id = UCLASS_VIDEO,
|
|
.of_match = mvebu_video_ids,
|
|
.bind = mvebu_video_bind,
|
|
.probe = mvebu_video_probe,
|
|
.priv_auto = sizeof(struct mvebu_video_priv),
|
|
};
|