mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
2147a16983
Use CONFIG_IS_ENABLED() macro, which provides more convenient way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs for both SPL and U-Boot proper. CONFIG_IS_ENABLED(DM_I2C) expands to: - 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y', - 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y', - 0 otherwise. All occurences were replaced automatically using these bash cmds: $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
221 lines
5.8 KiB
C
221 lines
5.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2009 Wind River Systems, Inc.
|
|
* Tom Rix <Tom.Rix at windriver.com>
|
|
*
|
|
* twl4030_power_reset_init is derived from code on omapzoom,
|
|
* git://git.omapzoom.com/repo/u-boot.git
|
|
*
|
|
* Copyright (C) 2007-2009 Texas Instruments, Inc.
|
|
*
|
|
* twl4030_power_init is from cpu/omap3/common.c, power_init_r
|
|
*
|
|
* (C) Copyright 2004-2008
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* Author :
|
|
* Sunil Kumar <sunilsaini05 at gmail.com>
|
|
* Shashi Ranjan <shashiranjanmca05 at gmail.com>
|
|
*
|
|
* Derived from Beagle Board and 3430 SDP code by
|
|
* Richard Woodruff <r-woodruff2 at ti.com>
|
|
* Syed Mohammed Khasim <khasim at ti.com>
|
|
*/
|
|
|
|
#include <command.h>
|
|
#include <twl4030.h>
|
|
#include <linux/delay.h>
|
|
|
|
/*
|
|
* Power Reset
|
|
*/
|
|
void twl4030_power_reset_init(void)
|
|
{
|
|
u8 val = 0;
|
|
if (twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER,
|
|
TWL4030_PM_MASTER_P1_SW_EVENTS, &val)) {
|
|
printf("Error:TWL4030: failed to read the power register\n");
|
|
printf("Could not initialize hardware reset\n");
|
|
} else {
|
|
val |= TWL4030_PM_MASTER_SW_EVENTS_STOPON_PWRON;
|
|
if (twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
|
|
TWL4030_PM_MASTER_P1_SW_EVENTS, val)) {
|
|
printf("Error:TWL4030: failed to write the power register\n");
|
|
printf("Could not initialize hardware reset\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Power off
|
|
*/
|
|
void twl4030_power_off(void)
|
|
{
|
|
u8 data;
|
|
|
|
/* PM master unlock (CFG and TST keys) */
|
|
|
|
data = 0xCE;
|
|
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
|
|
TWL4030_PM_MASTER_PROTECT_KEY, data);
|
|
data = 0xEC;
|
|
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
|
|
TWL4030_PM_MASTER_PROTECT_KEY, data);
|
|
|
|
/* VBAT start disable */
|
|
|
|
twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER,
|
|
TWL4030_PM_MASTER_CFG_P1_TRANSITION, &data);
|
|
data &= ~TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_VBAT;
|
|
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
|
|
TWL4030_PM_MASTER_CFG_P1_TRANSITION, data);
|
|
|
|
twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER,
|
|
TWL4030_PM_MASTER_CFG_P2_TRANSITION, &data);
|
|
data &= ~TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_VBAT;
|
|
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
|
|
TWL4030_PM_MASTER_CFG_P2_TRANSITION, data);
|
|
|
|
twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER,
|
|
TWL4030_PM_MASTER_CFG_P3_TRANSITION, &data);
|
|
data &= ~TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_VBAT;
|
|
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
|
|
TWL4030_PM_MASTER_CFG_P3_TRANSITION, data);
|
|
|
|
/* High jitter for PWRANA2 */
|
|
|
|
twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER,
|
|
TWL4030_PM_MASTER_CFG_PWRANA2, &data);
|
|
data &= ~(TWL4030_PM_MASTER_CFG_PWRANA2_LOJIT0_LOWV |
|
|
TWL4030_PM_MASTER_CFG_PWRANA2_LOJIT1_LOWV);
|
|
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
|
|
TWL4030_PM_MASTER_CFG_PWRANA2, data);
|
|
|
|
/* PM master lock */
|
|
|
|
data = 0xFF;
|
|
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
|
|
TWL4030_PM_MASTER_PROTECT_KEY, data);
|
|
|
|
/* Power off */
|
|
|
|
twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER,
|
|
TWL4030_PM_MASTER_P1_SW_EVENTS, &data);
|
|
data |= TWL4030_PM_MASTER_SW_EVENTS_DEVOFF;
|
|
twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
|
|
TWL4030_PM_MASTER_P1_SW_EVENTS, data);
|
|
}
|
|
|
|
/*
|
|
* Set Device Group and Voltage
|
|
*/
|
|
void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val,
|
|
u8 dev_grp, u8 dev_grp_sel)
|
|
{
|
|
int ret;
|
|
|
|
/* Select the Voltage */
|
|
ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, vsel_reg,
|
|
vsel_val);
|
|
if (ret != 0) {
|
|
printf("Could not write vsel to reg %02x (%d)\n",
|
|
vsel_reg, ret);
|
|
return;
|
|
}
|
|
|
|
/* Select the Device Group (enable the supply if dev_grp_sel != 0) */
|
|
ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, dev_grp,
|
|
dev_grp_sel);
|
|
if (ret != 0)
|
|
printf("Could not write grp_sel to reg %02x (%d)\n",
|
|
dev_grp, ret);
|
|
}
|
|
|
|
void twl4030_power_init(void)
|
|
{
|
|
/* set VAUX3 to 2.8V */
|
|
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX3_DEDICATED,
|
|
TWL4030_PM_RECEIVER_VAUX3_VSEL_28,
|
|
TWL4030_PM_RECEIVER_VAUX3_DEV_GRP,
|
|
TWL4030_PM_RECEIVER_DEV_GRP_P1);
|
|
|
|
/* set VPLL2 to 1.8V */
|
|
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VPLL2_DEDICATED,
|
|
TWL4030_PM_RECEIVER_VPLL2_VSEL_18,
|
|
TWL4030_PM_RECEIVER_VPLL2_DEV_GRP,
|
|
TWL4030_PM_RECEIVER_DEV_GRP_ALL);
|
|
|
|
/* set VDAC to 1.8V */
|
|
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VDAC_DEDICATED,
|
|
TWL4030_PM_RECEIVER_VDAC_VSEL_18,
|
|
TWL4030_PM_RECEIVER_VDAC_DEV_GRP,
|
|
TWL4030_PM_RECEIVER_DEV_GRP_P1);
|
|
}
|
|
|
|
void twl4030_power_mmc_init(int dev_index)
|
|
{
|
|
if (dev_index == 0) {
|
|
/* Set VMMC1 to 3.15 Volts */
|
|
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED,
|
|
TWL4030_PM_RECEIVER_VMMC1_VSEL_32,
|
|
TWL4030_PM_RECEIVER_VMMC1_DEV_GRP,
|
|
TWL4030_PM_RECEIVER_DEV_GRP_P1);
|
|
|
|
mdelay(100); /* ramp-up delay from Linux code */
|
|
} else if (dev_index == 1) {
|
|
/* Set VMMC2 to 3.15 Volts */
|
|
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED,
|
|
TWL4030_PM_RECEIVER_VMMC2_VSEL_32,
|
|
TWL4030_PM_RECEIVER_VMMC2_DEV_GRP,
|
|
TWL4030_PM_RECEIVER_DEV_GRP_P1);
|
|
|
|
mdelay(100); /* ramp-up delay from Linux code */
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_CMD_POWEROFF
|
|
int do_poweroff(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
|
|
{
|
|
twl4030_power_off();
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(DM_I2C)
|
|
int twl4030_i2c_write_u8(u8 chip_no, u8 reg, u8 val)
|
|
{
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
ret = i2c_get_chip_for_busnum(0, chip_no, 1, &dev);
|
|
if (ret) {
|
|
pr_err("unable to get I2C bus. ret %d\n", ret);
|
|
return ret;
|
|
}
|
|
ret = dm_i2c_reg_write(dev, reg, val);
|
|
if (ret) {
|
|
pr_err("writing to twl4030 failed. ret %d\n", ret);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int twl4030_i2c_read(u8 chip_no, u8 reg, u8 *valp, int len)
|
|
{
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
ret = i2c_get_chip_for_busnum(0, chip_no, 1, &dev);
|
|
if (ret) {
|
|
pr_err("unable to get I2C bus. ret %d\n", ret);
|
|
return ret;
|
|
}
|
|
ret = dm_i2c_read(dev, reg, valp, len);
|
|
if (ret) {
|
|
pr_err("reading from twl4030 failed. ret %d\n", ret);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|