mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
185f812c41
Sphinx expects Return: and not @return to indicate a return value. find . -name '*.c' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; find . -name '*.h' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
216 lines
5.1 KiB
C
216 lines
5.1 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2012-2013
|
|
* Texas Instruments, <www.ti.com>
|
|
*/
|
|
#include <config.h>
|
|
#include <palmas.h>
|
|
|
|
void palmas_init_settings(void)
|
|
{
|
|
#ifdef CONFIG_PALMAS_SMPS7_FPWM
|
|
int err;
|
|
/*
|
|
* Set SMPS7 (1.8 V I/O supply on platforms with TWL6035/37) to
|
|
* forced PWM mode. This reduces noise (but affects efficiency).
|
|
*/
|
|
u8 val = SMPS_MODE_SLP_FPWM | SMPS_MODE_ACT_FPWM;
|
|
err = palmas_i2c_write_u8(TWL603X_CHIP_P1, SMPS7_CTRL, val);
|
|
if (err)
|
|
printf("palmas: could not force PWM for SMPS7: err = %d\n",
|
|
err);
|
|
#endif
|
|
}
|
|
|
|
#if defined(CONFIG_OMAP54XX)
|
|
int lp873x_mmc1_poweron_ldo(uint voltage)
|
|
{
|
|
if (palmas_i2c_write_u8(LP873X_LDO1_ADDR, LP873X_LDO1_VOLTAGE,
|
|
voltage)) {
|
|
printf("lp873x: could not set LDO1 voltage.\n");
|
|
return 1;
|
|
}
|
|
/* TURN ON LDO1 */
|
|
if (palmas_i2c_write_u8(LP873X_LDO1_ADDR, LP873X_LDO1_CTRL,
|
|
LP873X_LDO_CTRL_EN | LP873X_LDO_CTRL_RDIS_EN)) {
|
|
printf("lp873x: could not turn on LDO1.\n");
|
|
return 1;
|
|
}
|
|
return 0;
|
|
|
|
}
|
|
#endif
|
|
|
|
int palmas_mmc1_poweron_ldo(uint ldo_volt, uint ldo_ctrl, uint voltage)
|
|
{
|
|
u8 val = 0;
|
|
|
|
#if defined(CONFIG_DRA7XX)
|
|
int ret;
|
|
|
|
ret = palmas_i2c_write_u8(TPS65903X_CHIP_P1, ldo_volt, voltage);
|
|
if (ret) {
|
|
printf("tps65903x: could not set LDO1 voltage.\n");
|
|
return ret;
|
|
}
|
|
/* TURN ON LDO1 */
|
|
val = RSC_MODE_SLEEP | RSC_MODE_ACTIVE;
|
|
ret = palmas_i2c_write_u8(TPS65903X_CHIP_P1, ldo_ctrl, val);
|
|
if (ret) {
|
|
printf("tps65903x: could not turn on LDO1.\n");
|
|
return ret;
|
|
}
|
|
return 0;
|
|
#else
|
|
/*
|
|
* We assume that this is a OMAP543X + TWL603X board:
|
|
* Set TWL6035/37 LDO9 to 3.0 V
|
|
*/
|
|
val = LDO_VOLT_3V0;
|
|
return twl603x_mmc1_set_ldo9(val);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* On some OMAP5 + TWL603X hardware the SD card socket and LDO9_IN are
|
|
* powered by an external 3.3 V regulator, while the output of LDO9
|
|
* supplies VDDS_SDCARD for the OMAP5 interface only. This implies that
|
|
* LDO9 could be set to 'bypass' mode when required (e.g. for 3.3 V cards).
|
|
*/
|
|
int twl603x_mmc1_set_ldo9(u8 vsel)
|
|
{
|
|
u8 cval = 0, vval = 0; /* Off by default */
|
|
int err;
|
|
|
|
if (vsel) {
|
|
/* Turn on */
|
|
if (vsel > LDO_VOLT_3V3) {
|
|
/* Put LDO9 in bypass */
|
|
cval = LDO9_BYP_EN | RSC_MODE_SLEEP | RSC_MODE_ACTIVE;
|
|
vval = LDO_VOLT_3V3;
|
|
} else {
|
|
cval = RSC_MODE_SLEEP | RSC_MODE_ACTIVE;
|
|
vval = vsel & 0x3f;
|
|
}
|
|
}
|
|
err = palmas_i2c_write_u8(TWL603X_CHIP_P1, LDO9_VOLTAGE, vval);
|
|
if (err) {
|
|
printf("twl603x: could not set LDO9 %s: err = %d\n",
|
|
vsel > LDO_VOLT_3V3 ? "bypass" : "voltage", err);
|
|
return err;
|
|
}
|
|
err = palmas_i2c_write_u8(TWL603X_CHIP_P1, LDO9_CTRL, cval);
|
|
if (err)
|
|
printf("twl603x: could not turn %s LDO9: err = %d\n",
|
|
cval ? "on" : "off", err);
|
|
return err;
|
|
}
|
|
|
|
#ifdef CONFIG_PALMAS_AUDPWR
|
|
/*
|
|
* Turn audio codec power and 32 kHz clock on/off. Use for
|
|
* testing OMAP543X + TWL603X + TWL604X boards only.
|
|
*/
|
|
int twl603x_audio_power(u8 on)
|
|
{
|
|
u8 cval = 0, vval = 0, c32k = 0;
|
|
int err;
|
|
|
|
if (on) {
|
|
vval = SMPS_VOLT_2V1;
|
|
cval = SMPS_MODE_SLP_AUTO | SMPS_MODE_ACT_AUTO;
|
|
c32k = RSC_MODE_SLEEP | RSC_MODE_ACTIVE;
|
|
}
|
|
/* Set SMPS9 to 2.1 V (for TWL604x), or to 0 (off) */
|
|
err = palmas_i2c_write_u8(TWL603X_CHIP_P1, SMPS9_VOLTAGE, vval);
|
|
if (err) {
|
|
printf("twl603x: could not set SMPS9 voltage: err = %d\n",
|
|
err);
|
|
return err;
|
|
}
|
|
/* Turn on or off SMPS9 */
|
|
err = palmas_i2c_write_u8(TWL603X_CHIP_P1, SMPS9_CTRL, cval);
|
|
if (err) {
|
|
printf("twl603x: could not turn SMPS9 %s: err = %d\n",
|
|
cval ? "on" : "off", err);
|
|
return err;
|
|
}
|
|
/* Output 32 kHz clock on or off */
|
|
err = palmas_i2c_write_u8(TWL603X_CHIP_P1, CLK32KGAUDIO_CTRL, c32k);
|
|
if (err)
|
|
printf("twl603x: could not turn CLK32KGAUDIO %s: err = %d\n",
|
|
c32k ? "on" : "off", err);
|
|
return err;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PALMAS_USB_SS_PWR
|
|
/**
|
|
* @brief palmas_enable_ss_ldo - Configure EVM board specific configurations
|
|
* for the USB Super speed SMPS10 regulator.
|
|
*
|
|
* Return: 0
|
|
*/
|
|
int palmas_enable_ss_ldo(void)
|
|
{
|
|
/* Enable smps10 regulator */
|
|
return palmas_i2c_write_u8(TWL603X_CHIP_P1, SMPS10_CTRL,
|
|
SMPS10_MODE_ACTIVE_D);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Enable/disable back-up battery (or super cap) charging on TWL6035/37.
|
|
* Please use defined BB_xxx values.
|
|
*/
|
|
int twl603x_enable_bb_charge(u8 bb_fields)
|
|
{
|
|
u8 val = bb_fields & 0x0f;
|
|
int err;
|
|
|
|
val |= (VRTC_EN_SLP | VRTC_EN_OFF | VRTC_PWEN);
|
|
err = palmas_i2c_write_u8(TWL603X_CHIP_P1, BB_VRTC_CTRL, val);
|
|
if (err)
|
|
printf("twl603x: could not set BB_VRTC_CTRL to 0x%02x: err = %d\n",
|
|
val, err);
|
|
return err;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(DM_I2C)
|
|
int palmas_i2c_write_u8(u8 chip_no, u8 reg, u8 val)
|
|
{
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
ret = i2c_get_chip_for_busnum(0, chip_no, 1, &dev);
|
|
if (ret) {
|
|
pr_err("unable to get I2C bus. ret %d\n", ret);
|
|
return ret;
|
|
}
|
|
ret = dm_i2c_reg_write(dev, reg, val);
|
|
if (ret) {
|
|
pr_err("writing to palmas failed. ret %d\n", ret);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int palmas_i2c_read_u8(u8 chip_no, u8 reg, u8 *valp)
|
|
{
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
ret = i2c_get_chip_for_busnum(0, chip_no, 1, &dev);
|
|
if (ret) {
|
|
pr_err("unable to get I2C bus. ret %d\n", ret);
|
|
return ret;
|
|
}
|
|
ret = dm_i2c_reg_read(dev, reg);
|
|
if (ret < 0) {
|
|
pr_err("reading from palmas failed. ret %d\n", ret);
|
|
return ret;
|
|
}
|
|
*valp = (u8)ret;
|
|
return 0;
|
|
}
|
|
#endif
|