mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
830e161eb4
The sysreset uclass has an option to provide the do_poweroff() function. When that option is enabled, the AXP power drivers should not provide their own definition. For the AXP305, which is paired with 64-bit systems where TF-A provides PSCI, there is another possible conflict with the PSCI firmware driver. This driver can be enabled even if CONFIG_PSCI_RESET is disabled, so make sure to use the right symbol in the condition. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
278 lines
5.7 KiB
C
278 lines
5.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* AXP221 and AXP223 driver
|
|
*
|
|
* IMPORTANT when making changes to this file check that the registers
|
|
* used are the same for the axp221 and axp223.
|
|
*
|
|
* (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
|
|
* (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <errno.h>
|
|
#include <asm/arch/pmic_bus.h>
|
|
#include <axp_pmic.h>
|
|
|
|
static u8 axp221_mvolt_to_cfg(int mvolt, int min, int max, int div)
|
|
{
|
|
if (mvolt < min)
|
|
mvolt = min;
|
|
else if (mvolt > max)
|
|
mvolt = max;
|
|
|
|
return (mvolt - min) / div;
|
|
}
|
|
|
|
int axp_set_dcdc1(unsigned int mvolt)
|
|
{
|
|
int ret;
|
|
u8 cfg = axp221_mvolt_to_cfg(mvolt, 1600, 3400, 100);
|
|
|
|
if (mvolt == 0)
|
|
return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
|
|
AXP221_OUTPUT_CTRL1_DCDC1_EN);
|
|
|
|
ret = pmic_bus_write(AXP221_DCDC1_CTRL, cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pmic_bus_setbits(AXP221_OUTPUT_CTRL2,
|
|
AXP221_OUTPUT_CTRL2_DCDC1SW_EN);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
|
|
AXP221_OUTPUT_CTRL1_DCDC1_EN);
|
|
}
|
|
|
|
int axp_set_dcdc2(unsigned int mvolt)
|
|
{
|
|
int ret;
|
|
u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20);
|
|
|
|
if (mvolt == 0)
|
|
return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
|
|
AXP221_OUTPUT_CTRL1_DCDC2_EN);
|
|
|
|
ret = pmic_bus_write(AXP221_DCDC2_CTRL, cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
|
|
AXP221_OUTPUT_CTRL1_DCDC2_EN);
|
|
}
|
|
|
|
int axp_set_dcdc3(unsigned int mvolt)
|
|
{
|
|
int ret;
|
|
u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1860, 20);
|
|
|
|
if (mvolt == 0)
|
|
return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
|
|
AXP221_OUTPUT_CTRL1_DCDC3_EN);
|
|
|
|
ret = pmic_bus_write(AXP221_DCDC3_CTRL, cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
|
|
AXP221_OUTPUT_CTRL1_DCDC3_EN);
|
|
}
|
|
|
|
int axp_set_dcdc4(unsigned int mvolt)
|
|
{
|
|
int ret;
|
|
u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20);
|
|
|
|
if (mvolt == 0)
|
|
return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
|
|
AXP221_OUTPUT_CTRL1_DCDC4_EN);
|
|
|
|
ret = pmic_bus_write(AXP221_DCDC4_CTRL, cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
|
|
AXP221_OUTPUT_CTRL1_DCDC4_EN);
|
|
}
|
|
|
|
int axp_set_dcdc5(unsigned int mvolt)
|
|
{
|
|
int ret;
|
|
u8 cfg = axp221_mvolt_to_cfg(mvolt, 1000, 2550, 50);
|
|
|
|
if (mvolt == 0)
|
|
return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
|
|
AXP221_OUTPUT_CTRL1_DCDC5_EN);
|
|
|
|
ret = pmic_bus_write(AXP221_DCDC5_CTRL, cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
|
|
AXP221_OUTPUT_CTRL1_DCDC5_EN);
|
|
}
|
|
|
|
int axp_set_aldo1(unsigned int mvolt)
|
|
{
|
|
int ret;
|
|
u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
|
|
|
|
if (mvolt == 0)
|
|
return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
|
|
AXP221_OUTPUT_CTRL1_ALDO1_EN);
|
|
|
|
ret = pmic_bus_write(AXP221_ALDO1_CTRL, cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
|
|
AXP221_OUTPUT_CTRL1_ALDO1_EN);
|
|
}
|
|
|
|
int axp_set_aldo2(unsigned int mvolt)
|
|
{
|
|
int ret;
|
|
u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
|
|
|
|
if (mvolt == 0)
|
|
return pmic_bus_clrbits(AXP221_OUTPUT_CTRL1,
|
|
AXP221_OUTPUT_CTRL1_ALDO2_EN);
|
|
|
|
ret = pmic_bus_write(AXP221_ALDO2_CTRL, cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return pmic_bus_setbits(AXP221_OUTPUT_CTRL1,
|
|
AXP221_OUTPUT_CTRL1_ALDO2_EN);
|
|
}
|
|
|
|
int axp_set_aldo3(unsigned int mvolt)
|
|
{
|
|
int ret;
|
|
u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
|
|
|
|
if (mvolt == 0)
|
|
return pmic_bus_clrbits(AXP221_OUTPUT_CTRL3,
|
|
AXP221_OUTPUT_CTRL3_ALDO3_EN);
|
|
|
|
ret = pmic_bus_write(AXP221_ALDO3_CTRL, cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return pmic_bus_setbits(AXP221_OUTPUT_CTRL3,
|
|
AXP221_OUTPUT_CTRL3_ALDO3_EN);
|
|
}
|
|
|
|
int axp_set_dldo(int dldo_num, unsigned int mvolt)
|
|
{
|
|
u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
|
|
int ret;
|
|
|
|
if (dldo_num < 1 || dldo_num > 4)
|
|
return -EINVAL;
|
|
|
|
if (mvolt == 0)
|
|
return pmic_bus_clrbits(AXP221_OUTPUT_CTRL2,
|
|
AXP221_OUTPUT_CTRL2_DLDO1_EN << (dldo_num - 1));
|
|
|
|
ret = pmic_bus_write(AXP221_DLDO1_CTRL + (dldo_num - 1), cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return pmic_bus_setbits(AXP221_OUTPUT_CTRL2,
|
|
AXP221_OUTPUT_CTRL2_DLDO1_EN << (dldo_num - 1));
|
|
}
|
|
|
|
int axp_set_eldo(int eldo_num, unsigned int mvolt)
|
|
{
|
|
int ret;
|
|
u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100);
|
|
|
|
if (eldo_num < 1 || eldo_num > 3)
|
|
return -EINVAL;
|
|
|
|
if (mvolt == 0)
|
|
return pmic_bus_clrbits(AXP221_OUTPUT_CTRL2,
|
|
AXP221_OUTPUT_CTRL2_ELDO1_EN << (eldo_num - 1));
|
|
|
|
ret = pmic_bus_write(AXP221_ELDO1_CTRL + (eldo_num - 1), cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return pmic_bus_setbits(AXP221_OUTPUT_CTRL2,
|
|
AXP221_OUTPUT_CTRL2_ELDO1_EN << (eldo_num - 1));
|
|
}
|
|
|
|
int axp_init(void)
|
|
{
|
|
u8 axp_chip_id;
|
|
int ret;
|
|
|
|
ret = pmic_bus_init();
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pmic_bus_read(AXP221_CHIP_ID, &axp_chip_id);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!(axp_chip_id == 0x6 || axp_chip_id == 0x7 || axp_chip_id == 0x17))
|
|
return -ENODEV;
|
|
|
|
/*
|
|
* Turn off LDOIO regulators / tri-state GPIO pins, when rebooting
|
|
* from android these are sometimes on.
|
|
*/
|
|
ret = pmic_bus_write(AXP_GPIO0_CTRL, AXP_GPIO_CTRL_INPUT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pmic_bus_write(AXP_GPIO1_CTRL, AXP_GPIO_CTRL_INPUT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int axp_get_sid(unsigned int *sid)
|
|
{
|
|
u8 *dest = (u8 *)sid;
|
|
int i, ret;
|
|
|
|
ret = pmic_bus_init();
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pmic_bus_write(AXP221_PAGE, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < 16; i++) {
|
|
ret = pmic_bus_read(AXP221_SID + i, &dest[i]);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
pmic_bus_write(AXP221_PAGE, 0);
|
|
|
|
for (i = 0; i < 4; i++)
|
|
sid[i] = be32_to_cpu(sid[i]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if !IS_ENABLED(CONFIG_SYSRESET_CMD_POWEROFF)
|
|
int do_poweroff(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
|
|
{
|
|
pmic_bus_write(AXP221_SHUTDOWN, AXP221_SHUTDOWN_POWEROFF);
|
|
|
|
/* infinite loop during shutdown */
|
|
while (1) {}
|
|
|
|
/* not reached */
|
|
return 0;
|
|
}
|
|
#endif
|