mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
6e7df1d151
At this point, the remaining places where we have a symbol that is defined as CONFIG_... are in fairly odd locations. While as much dead code has been removed as possible, some of these locations are simply less obvious at first. In other cases, this code is used, but was defined in such a way as to have been missed by earlier checks. Perform a rename of all such remaining symbols to be CFG_... rather than CONFIG_... Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
839 lines
20 KiB
C
839 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2018 Marvell International Ltd.
|
|
*/
|
|
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <i2c.h>
|
|
#include <time.h>
|
|
#include <asm/io.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/compat.h>
|
|
#include <linux/delay.h>
|
|
|
|
#define TWSI_SW_TWSI 0x00
|
|
#define TWSI_TWSI_SW 0x08
|
|
#define TWSI_INT 0x10
|
|
#define TWSI_SW_TWSI_EXT 0x18
|
|
|
|
#define TWSI_SW_DATA_MASK GENMASK_ULL(31, 0)
|
|
#define TWSI_SW_EOP_IA_MASK GENMASK_ULL(34, 32)
|
|
#define TWSI_SW_IA_MASK GENMASK_ULL(39, 35)
|
|
#define TWSI_SW_ADDR_MASK GENMASK_ULL(49, 40)
|
|
#define TWSI_SW_SCR_MASK GENMASK_ULL(51, 50)
|
|
#define TWSI_SW_SIZE_MASK GENMASK_ULL(54, 52)
|
|
#define TWSI_SW_SOVR BIT_ULL(55)
|
|
#define TWSI_SW_R BIT_ULL(56)
|
|
#define TWSI_SW_OP_MASK GENMASK_ULL(60, 57)
|
|
#define TWSI_SW_EIA GENMASK_ULL(61)
|
|
#define TWSI_SW_SLONLY BIT_ULL(62)
|
|
#define TWSI_SW_V BIT_ULL(63)
|
|
|
|
#define TWSI_INT_SDA_OVR BIT_ULL(8)
|
|
#define TWSI_INT_SCL_OVR BIT_ULL(9)
|
|
#define TWSI_INT_SDA BIT_ULL(10)
|
|
#define TWSI_INT_SCL BIT_ULL(11)
|
|
|
|
enum {
|
|
TWSI_OP_WRITE = 0,
|
|
TWSI_OP_READ = 1,
|
|
};
|
|
|
|
enum {
|
|
TWSI_EOP_SLAVE_ADDR = 0,
|
|
TWSI_EOP_CLK_CTL = 3,
|
|
TWSI_SW_EOP_IA = 6,
|
|
};
|
|
|
|
enum {
|
|
TWSI_SLAVEADD = 0,
|
|
TWSI_DATA = 1,
|
|
TWSI_CTL = 2,
|
|
TWSI_CLKCTL = 3,
|
|
TWSI_STAT = 3,
|
|
TWSI_SLAVEADD_EXT = 4,
|
|
TWSI_RST = 7,
|
|
};
|
|
|
|
enum {
|
|
TWSI_CTL_AAK = BIT(2),
|
|
TWSI_CTL_IFLG = BIT(3),
|
|
TWSI_CTL_STP = BIT(4),
|
|
TWSI_CTL_STA = BIT(5),
|
|
TWSI_CTL_ENAB = BIT(6),
|
|
TWSI_CTL_CE = BIT(7),
|
|
};
|
|
|
|
/*
|
|
* Internal errors. When debugging is enabled, the driver will report the
|
|
* error number and the user / developer can check the table below for the
|
|
* detailed error description.
|
|
*/
|
|
enum {
|
|
/** Bus error */
|
|
TWSI_STAT_BUS_ERROR = 0x00,
|
|
/** Start condition transmitted */
|
|
TWSI_STAT_START = 0x08,
|
|
/** Repeat start condition transmitted */
|
|
TWSI_STAT_RSTART = 0x10,
|
|
/** Address + write bit transmitted, ACK received */
|
|
TWSI_STAT_TXADDR_ACK = 0x18,
|
|
/** Address + write bit transmitted, /ACK received */
|
|
TWSI_STAT_TXADDR_NAK = 0x20,
|
|
/** Data byte transmitted in master mode, ACK received */
|
|
TWSI_STAT_TXDATA_ACK = 0x28,
|
|
/** Data byte transmitted in master mode, ACK received */
|
|
TWSI_STAT_TXDATA_NAK = 0x30,
|
|
/** Arbitration lost in address or data byte */
|
|
TWSI_STAT_TX_ARB_LOST = 0x38,
|
|
/** Address + read bit transmitted, ACK received */
|
|
TWSI_STAT_RXADDR_ACK = 0x40,
|
|
/** Address + read bit transmitted, /ACK received */
|
|
TWSI_STAT_RXADDR_NAK = 0x48,
|
|
/** Data byte received in master mode, ACK transmitted */
|
|
TWSI_STAT_RXDATA_ACK_SENT = 0x50,
|
|
/** Data byte received, NACK transmitted */
|
|
TWSI_STAT_RXDATA_NAK_SENT = 0x58,
|
|
/** Slave address received, sent ACK */
|
|
TWSI_STAT_SLAVE_RXADDR_ACK = 0x60,
|
|
/**
|
|
* Arbitration lost in address as master, slave address + write bit
|
|
* received, ACK transmitted
|
|
*/
|
|
TWSI_STAT_TX_ACK_ARB_LOST = 0x68,
|
|
/** General call address received, ACK transmitted */
|
|
TWSI_STAT_RX_GEN_ADDR_ACK = 0x70,
|
|
/**
|
|
* Arbitration lost in address as master, general call address
|
|
* received, ACK transmitted
|
|
*/
|
|
TWSI_STAT_RX_GEN_ADDR_ARB_LOST = 0x78,
|
|
/** Data byte received after slave address received, ACK transmitted */
|
|
TWSI_STAT_SLAVE_RXDATA_ACK = 0x80,
|
|
/** Data byte received after slave address received, /ACK transmitted */
|
|
TWSI_STAT_SLAVE_RXDATA_NAK = 0x88,
|
|
/**
|
|
* Data byte received after general call address received, ACK
|
|
* transmitted
|
|
*/
|
|
TWSI_STAT_GEN_RXADDR_ACK = 0x90,
|
|
/**
|
|
* Data byte received after general call address received, /ACK
|
|
* transmitted
|
|
*/
|
|
TWSI_STAT_GEN_RXADDR_NAK = 0x98,
|
|
/** STOP or repeated START condition received in slave mode */
|
|
TWSI_STAT_STOP_MULTI_START = 0xa0,
|
|
/** Slave address + read bit received, ACK transmitted */
|
|
TWSI_STAT_SLAVE_RXADDR2_ACK = 0xa8,
|
|
/**
|
|
* Arbitration lost in address as master, slave address + read bit
|
|
* received, ACK transmitted
|
|
*/
|
|
TWSI_STAT_RXDATA_ACK_ARB_LOST = 0xb0,
|
|
/** Data byte transmitted in slave mode, ACK received */
|
|
TWSI_STAT_SLAVE_TXDATA_ACK = 0xb8,
|
|
/** Data byte transmitted in slave mode, /ACK received */
|
|
TWSI_STAT_SLAVE_TXDATA_NAK = 0xc0,
|
|
/** Last byte transmitted in slave mode, ACK received */
|
|
TWSI_STAT_SLAVE_TXDATA_END_ACK = 0xc8,
|
|
/** Second address byte + write bit transmitted, ACK received */
|
|
TWSI_STAT_TXADDR2DATA_ACK = 0xd0,
|
|
/** Second address byte + write bit transmitted, /ACK received */
|
|
TWSI_STAT_TXADDR2DATA_NAK = 0xd8,
|
|
/** No relevant status information */
|
|
TWSI_STAT_IDLE = 0xf8
|
|
};
|
|
|
|
#define CFG_SYS_I2C_OCTEON_SLAVE_ADDR 0x77
|
|
|
|
enum {
|
|
PROBE_PCI = 0, /* PCI based probing */
|
|
PROBE_DT, /* DT based probing */
|
|
};
|
|
|
|
enum {
|
|
CLK_METHOD_OCTEON = 0,
|
|
CLK_METHOD_OCTEONTX2,
|
|
};
|
|
|
|
/**
|
|
* struct octeon_i2c_data - SoC specific data of this driver
|
|
*
|
|
* @probe: Probing of this SoC (DT vs PCI)
|
|
* @reg_offs: Register offset
|
|
* @thp: THP define for divider calculation
|
|
* @clk_method: Clock calculation method
|
|
*/
|
|
struct octeon_i2c_data {
|
|
int probe;
|
|
u32 reg_offs;
|
|
int thp;
|
|
int clk_method;
|
|
};
|
|
|
|
/**
|
|
* struct octeon_twsi - Private data of this driver
|
|
*
|
|
* @base: Base address of i2c registers
|
|
* @data: Pointer to SoC specific data struct
|
|
*/
|
|
struct octeon_twsi {
|
|
void __iomem *base;
|
|
const struct octeon_i2c_data *data;
|
|
struct clk clk;
|
|
};
|
|
|
|
static void twsi_unblock(void *base);
|
|
static int twsi_stop(void *base);
|
|
|
|
/**
|
|
* Returns true if we lost arbitration
|
|
*
|
|
* @code status code
|
|
* @final_read true if this is the final read operation
|
|
* Return: true if arbitration has been lost, false if it hasn't been lost.
|
|
*/
|
|
static int twsi_i2c_lost_arb(u8 code, int final_read)
|
|
{
|
|
switch (code) {
|
|
case TWSI_STAT_TX_ARB_LOST:
|
|
case TWSI_STAT_TX_ACK_ARB_LOST:
|
|
case TWSI_STAT_RX_GEN_ADDR_ARB_LOST:
|
|
case TWSI_STAT_RXDATA_ACK_ARB_LOST:
|
|
/* Arbitration lost */
|
|
return -EAGAIN;
|
|
|
|
case TWSI_STAT_SLAVE_RXADDR_ACK:
|
|
case TWSI_STAT_RX_GEN_ADDR_ACK:
|
|
case TWSI_STAT_GEN_RXADDR_ACK:
|
|
case TWSI_STAT_GEN_RXADDR_NAK:
|
|
/* Being addressed as slave, should back off and listen */
|
|
return -EIO;
|
|
|
|
case TWSI_STAT_SLAVE_RXDATA_ACK:
|
|
case TWSI_STAT_SLAVE_RXDATA_NAK:
|
|
case TWSI_STAT_STOP_MULTI_START:
|
|
case TWSI_STAT_SLAVE_RXADDR2_ACK:
|
|
case TWSI_STAT_SLAVE_TXDATA_ACK:
|
|
case TWSI_STAT_SLAVE_TXDATA_NAK:
|
|
case TWSI_STAT_SLAVE_TXDATA_END_ACK:
|
|
/* Core busy as slave */
|
|
return -EIO;
|
|
|
|
case TWSI_STAT_RXDATA_ACK_SENT:
|
|
/* Ack allowed on pre-terminal bytes only */
|
|
if (!final_read)
|
|
return 0;
|
|
return -EAGAIN;
|
|
|
|
case TWSI_STAT_RXDATA_NAK_SENT:
|
|
/* NAK allowed on terminal byte only */
|
|
if (!final_read)
|
|
return 0;
|
|
return -EAGAIN;
|
|
|
|
case TWSI_STAT_TXDATA_NAK:
|
|
case TWSI_STAT_TXADDR_NAK:
|
|
case TWSI_STAT_RXADDR_NAK:
|
|
case TWSI_STAT_TXADDR2DATA_NAK:
|
|
return -EAGAIN;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Writes to the MIO_TWS(0..5)_SW_TWSI register
|
|
*
|
|
* @base Base address of i2c registers
|
|
* @val value to write
|
|
* Return: 0 for success, otherwise error
|
|
*/
|
|
static u64 twsi_write_sw(void __iomem *base, u64 val)
|
|
{
|
|
unsigned long start = get_timer(0);
|
|
|
|
val &= ~TWSI_SW_R;
|
|
val |= TWSI_SW_V;
|
|
|
|
debug("%s(%p, 0x%llx)\n", __func__, base, val);
|
|
writeq(val, base + TWSI_SW_TWSI);
|
|
do {
|
|
val = readq(base + TWSI_SW_TWSI);
|
|
} while ((val & TWSI_SW_V) && (get_timer(start) < 50));
|
|
|
|
if (val & TWSI_SW_V)
|
|
debug("%s: timed out\n", __func__);
|
|
return val;
|
|
}
|
|
|
|
/**
|
|
* Reads the MIO_TWS(0..5)_SW_TWSI register
|
|
*
|
|
* @base Base address of i2c registers
|
|
* @val value for eia and op, etc. to read
|
|
* Return: value of the register
|
|
*/
|
|
static u64 twsi_read_sw(void __iomem *base, u64 val)
|
|
{
|
|
unsigned long start = get_timer(0);
|
|
|
|
val |= TWSI_SW_R | TWSI_SW_V;
|
|
|
|
debug("%s(%p, 0x%llx)\n", __func__, base, val);
|
|
writeq(val, base + TWSI_SW_TWSI);
|
|
|
|
do {
|
|
val = readq(base + TWSI_SW_TWSI);
|
|
} while ((val & TWSI_SW_V) && (get_timer(start) < 50));
|
|
|
|
if (val & TWSI_SW_V)
|
|
debug("%s: Error writing 0x%llx\n", __func__, val);
|
|
|
|
debug("%s: Returning 0x%llx\n", __func__, val);
|
|
return val;
|
|
}
|
|
|
|
/**
|
|
* Write control register
|
|
*
|
|
* @base Base address for i2c registers
|
|
* @data data to write
|
|
*/
|
|
static void twsi_write_ctl(void __iomem *base, u8 data)
|
|
{
|
|
u64 val;
|
|
|
|
debug("%s(%p, 0x%x)\n", __func__, base, data);
|
|
val = data | FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_CTL) |
|
|
FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
|
|
twsi_write_sw(base, val);
|
|
}
|
|
|
|
/**
|
|
* Reads the TWSI Control Register
|
|
*
|
|
* @base Base address for i2c
|
|
* Return: 8-bit TWSI control register
|
|
*/
|
|
static u8 twsi_read_ctl(void __iomem *base)
|
|
{
|
|
u64 val;
|
|
|
|
val = FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_CTL) |
|
|
FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
|
|
val = twsi_read_sw(base, val);
|
|
|
|
debug("%s(%p): 0x%x\n", __func__, base, (u8)val);
|
|
return (u8)val;
|
|
}
|
|
|
|
/**
|
|
* Read i2c status register
|
|
*
|
|
* @base Base address of i2c registers
|
|
* Return: value of status register
|
|
*/
|
|
static u8 twsi_read_status(void __iomem *base)
|
|
{
|
|
u64 val;
|
|
|
|
val = FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_STAT) |
|
|
FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
|
|
|
|
return twsi_read_sw(base, val);
|
|
}
|
|
|
|
/**
|
|
* Waits for an i2c operation to complete
|
|
*
|
|
* @param base Base address of registers
|
|
* Return: 0 for success, 1 if timeout
|
|
*/
|
|
static int twsi_wait(void __iomem *base)
|
|
{
|
|
unsigned long start = get_timer(0);
|
|
u8 twsi_ctl;
|
|
|
|
debug("%s(%p)\n", __func__, base);
|
|
do {
|
|
twsi_ctl = twsi_read_ctl(base);
|
|
twsi_ctl &= TWSI_CTL_IFLG;
|
|
} while (!twsi_ctl && get_timer(start) < 50);
|
|
|
|
debug(" return: %u\n", !twsi_ctl);
|
|
return !twsi_ctl;
|
|
}
|
|
|
|
/**
|
|
* Unsticks the i2c bus
|
|
*
|
|
* @base base address of registers
|
|
*/
|
|
static int twsi_start_unstick(void __iomem *base)
|
|
{
|
|
twsi_stop(base);
|
|
twsi_unblock(base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Sends an i2c start condition
|
|
*
|
|
* @base base address of registers
|
|
* Return: 0 for success, otherwise error
|
|
*/
|
|
static int twsi_start(void __iomem *base)
|
|
{
|
|
int ret;
|
|
u8 stat;
|
|
|
|
debug("%s(%p)\n", __func__, base);
|
|
twsi_write_ctl(base, TWSI_CTL_STA | TWSI_CTL_ENAB);
|
|
ret = twsi_wait(base);
|
|
if (ret) {
|
|
stat = twsi_read_status(base);
|
|
debug("%s: ret: 0x%x, status: 0x%x\n", __func__, ret, stat);
|
|
switch (stat) {
|
|
case TWSI_STAT_START:
|
|
case TWSI_STAT_RSTART:
|
|
return 0;
|
|
case TWSI_STAT_RXADDR_ACK:
|
|
default:
|
|
return twsi_start_unstick(base);
|
|
}
|
|
}
|
|
|
|
debug("%s: success\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Sends an i2c stop condition
|
|
*
|
|
* @base register base address
|
|
* Return: 0 for success, -1 if error
|
|
*/
|
|
static int twsi_stop(void __iomem *base)
|
|
{
|
|
u8 stat;
|
|
|
|
twsi_write_ctl(base, TWSI_CTL_STP | TWSI_CTL_ENAB);
|
|
|
|
stat = twsi_read_status(base);
|
|
if (stat != TWSI_STAT_IDLE) {
|
|
debug("%s: Bad status on bus@%p\n", __func__, base);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Writes data to the i2c bus
|
|
*
|
|
* @base register base address
|
|
* @slave_addr address of slave to write to
|
|
* @buffer Pointer to buffer to write
|
|
* @length Number of bytes in buffer to write
|
|
* Return: 0 for success, otherwise error
|
|
*/
|
|
static int twsi_write_data(void __iomem *base, u8 slave_addr,
|
|
u8 *buffer, unsigned int length)
|
|
{
|
|
unsigned int curr = 0;
|
|
u64 val;
|
|
int ret;
|
|
|
|
debug("%s(%p, 0x%x, %p, 0x%x)\n", __func__, base, slave_addr,
|
|
buffer, length);
|
|
ret = twsi_start(base);
|
|
if (ret) {
|
|
debug("%s: Could not start BUS transaction\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
ret = twsi_wait(base);
|
|
if (ret) {
|
|
debug("%s: wait failed\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
val = (u32)(slave_addr << 1) | TWSI_OP_WRITE |
|
|
FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_DATA) |
|
|
FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
|
|
twsi_write_sw(base, val);
|
|
twsi_write_ctl(base, TWSI_CTL_ENAB);
|
|
|
|
debug("%s: Waiting\n", __func__);
|
|
ret = twsi_wait(base);
|
|
if (ret) {
|
|
debug("%s: Timed out writing slave address 0x%x to target\n",
|
|
__func__, slave_addr);
|
|
return ret;
|
|
}
|
|
|
|
ret = twsi_read_status(base);
|
|
debug("%s: status: 0x%x\n", __func__, ret);
|
|
if (ret != TWSI_STAT_TXADDR_ACK) {
|
|
debug("%s: status: 0x%x\n", __func__, ret);
|
|
twsi_stop(base);
|
|
return twsi_i2c_lost_arb(ret, 0);
|
|
}
|
|
|
|
while (curr < length) {
|
|
val = buffer[curr++] |
|
|
FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_DATA) |
|
|
FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
|
|
twsi_write_sw(base, val);
|
|
twsi_write_ctl(base, TWSI_CTL_ENAB);
|
|
|
|
debug("%s: Writing 0x%llx\n", __func__, val);
|
|
|
|
ret = twsi_wait(base);
|
|
if (ret) {
|
|
debug("%s: Timed out writing data to 0x%x\n",
|
|
__func__, slave_addr);
|
|
return ret;
|
|
}
|
|
ret = twsi_read_status(base);
|
|
debug("%s: status: 0x%x\n", __func__, ret);
|
|
}
|
|
|
|
debug("%s: Stopping\n", __func__);
|
|
return twsi_stop(base);
|
|
}
|
|
|
|
/**
|
|
* Manually clear the I2C bus and send a stop
|
|
*
|
|
* @base register base address
|
|
*/
|
|
static void twsi_unblock(void __iomem *base)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 9; i++) {
|
|
writeq(0, base + TWSI_INT);
|
|
udelay(5);
|
|
writeq(TWSI_INT_SCL_OVR, base + TWSI_INT);
|
|
udelay(5);
|
|
}
|
|
writeq(TWSI_INT_SCL_OVR | TWSI_INT_SDA_OVR, base + TWSI_INT);
|
|
udelay(5);
|
|
writeq(TWSI_INT_SDA_OVR, base + TWSI_INT);
|
|
udelay(5);
|
|
writeq(0, base + TWSI_INT);
|
|
udelay(5);
|
|
}
|
|
|
|
/**
|
|
* Performs a read transaction on the i2c bus
|
|
*
|
|
* @base Base address of twsi registers
|
|
* @slave_addr i2c bus address to read from
|
|
* @buffer buffer to read into
|
|
* @length number of bytes to read
|
|
* Return: 0 for success, otherwise error
|
|
*/
|
|
static int twsi_read_data(void __iomem *base, u8 slave_addr,
|
|
u8 *buffer, unsigned int length)
|
|
{
|
|
unsigned int curr = 0;
|
|
u64 val;
|
|
int ret;
|
|
|
|
debug("%s(%p, 0x%x, %p, %u)\n", __func__, base, slave_addr,
|
|
buffer, length);
|
|
ret = twsi_start(base);
|
|
if (ret) {
|
|
debug("%s: start failed\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
ret = twsi_wait(base);
|
|
if (ret) {
|
|
debug("%s: wait failed\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
val = (u32)(slave_addr << 1) | TWSI_OP_READ |
|
|
FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_DATA) |
|
|
FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA);
|
|
twsi_write_sw(base, val);
|
|
twsi_write_ctl(base, TWSI_CTL_ENAB);
|
|
|
|
ret = twsi_wait(base);
|
|
if (ret) {
|
|
debug("%s: waiting for sending addr failed\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
ret = twsi_read_status(base);
|
|
debug("%s: status: 0x%x\n", __func__, ret);
|
|
if (ret != TWSI_STAT_RXADDR_ACK) {
|
|
debug("%s: status: 0x%x\n", __func__, ret);
|
|
twsi_stop(base);
|
|
return twsi_i2c_lost_arb(ret, 0);
|
|
}
|
|
|
|
while (curr < length) {
|
|
twsi_write_ctl(base, TWSI_CTL_ENAB |
|
|
((curr < length - 1) ? TWSI_CTL_AAK : 0));
|
|
|
|
ret = twsi_wait(base);
|
|
if (ret) {
|
|
debug("%s: waiting for data failed\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
val = twsi_read_sw(base, val);
|
|
buffer[curr++] = (u8)val;
|
|
}
|
|
|
|
twsi_stop(base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Calculate the divisor values
|
|
*
|
|
* @speed Speed to set
|
|
* @m_div Pointer to M divisor
|
|
* @n_div Pointer to N divisor
|
|
* Return: 0 for success, otherwise error
|
|
*/
|
|
static void twsi_calc_div(struct udevice *bus, ulong sclk, unsigned int speed,
|
|
int *m_div, int *n_div)
|
|
{
|
|
struct octeon_twsi *twsi = dev_get_priv(bus);
|
|
int thp = twsi->data->thp;
|
|
int tclk, fsamp;
|
|
int ndiv, mdiv;
|
|
|
|
if (twsi->data->clk_method == CLK_METHOD_OCTEON) {
|
|
tclk = sclk / (2 * (thp + 1));
|
|
} else {
|
|
/* Refclk src in mode register defaults to 100MHz clock */
|
|
sclk = 100000000; /* 100 Mhz */
|
|
tclk = sclk / (thp + 2);
|
|
}
|
|
debug("%s( io_clock %lu tclk %u)\n", __func__, sclk, tclk);
|
|
|
|
/*
|
|
* Compute the clocks M divider:
|
|
*
|
|
* TWSI freq = (core freq) / (10 x (M+1) x 2 * (thp+1) x 2^N)
|
|
* M = ((core freq) / (10 x (TWSI freq) x 2 * (thp+1) x 2^N)) - 1
|
|
*
|
|
* For OcteonTX2 -
|
|
* TWSI freq = (core freq) / (10 x (M+1) x (thp+2) x 2^N)
|
|
* M = ((core freq) / (10 x (TWSI freq) x (thp+2) x 2^N)) - 1
|
|
*/
|
|
for (ndiv = 0; ndiv < 8; ndiv++) {
|
|
fsamp = tclk / (1 << ndiv);
|
|
mdiv = fsamp / speed / 10;
|
|
mdiv -= 1;
|
|
if (mdiv < 16)
|
|
break;
|
|
}
|
|
|
|
*m_div = mdiv;
|
|
*n_div = ndiv;
|
|
}
|
|
|
|
/**
|
|
* Init I2C controller
|
|
*
|
|
* @base Base address of twsi registers
|
|
* @slave_addr I2C slave address to configure this controller to
|
|
* Return: 0 for success, otherwise error
|
|
*/
|
|
static int twsi_init(void __iomem *base, int slaveaddr)
|
|
{
|
|
u64 val;
|
|
|
|
debug("%s (%p, 0x%x)\n", __func__, base, slaveaddr);
|
|
|
|
val = slaveaddr << 1 |
|
|
FIELD_PREP(TWSI_SW_EOP_IA_MASK, 0) |
|
|
FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA) |
|
|
TWSI_SW_V;
|
|
twsi_write_sw(base, val);
|
|
|
|
/* Set slave address */
|
|
val = slaveaddr |
|
|
FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_EOP_SLAVE_ADDR) |
|
|
FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA) |
|
|
TWSI_SW_V;
|
|
twsi_write_sw(base, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Transfers data over the i2c bus
|
|
*
|
|
* @bus i2c bus to transfer data over
|
|
* @msg Array of i2c messages
|
|
* @nmsgs Number of messages to send/receive
|
|
* Return: 0 for success, otherwise error
|
|
*/
|
|
static int octeon_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
|
|
int nmsgs)
|
|
{
|
|
struct octeon_twsi *twsi = dev_get_priv(bus);
|
|
int ret;
|
|
int i;
|
|
|
|
debug("%s: %d messages\n", __func__, nmsgs);
|
|
for (i = 0; i < nmsgs; i++, msg++) {
|
|
debug("%s: chip=0x%x, len=0x%x\n", __func__, msg->addr,
|
|
msg->len);
|
|
|
|
if (msg->flags & I2C_M_RD) {
|
|
debug("%s: Reading data\n", __func__);
|
|
ret = twsi_read_data(twsi->base, msg->addr,
|
|
msg->buf, msg->len);
|
|
} else {
|
|
debug("%s: Writing data\n", __func__);
|
|
ret = twsi_write_data(twsi->base, msg->addr,
|
|
msg->buf, msg->len);
|
|
}
|
|
if (ret) {
|
|
debug("%s: error sending\n", __func__);
|
|
return -EREMOTEIO;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Set I2C bus speed
|
|
*
|
|
* @bus i2c bus to transfer data over
|
|
* @speed Speed in Hz to set
|
|
* Return: 0 for success, otherwise error
|
|
*/
|
|
static int octeon_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
|
|
{
|
|
struct octeon_twsi *twsi = dev_get_priv(bus);
|
|
int m_div, n_div;
|
|
ulong clk_rate;
|
|
u64 val;
|
|
|
|
debug("%s(%p, %u)\n", __func__, bus, speed);
|
|
|
|
clk_rate = clk_get_rate(&twsi->clk);
|
|
if (IS_ERR_VALUE(clk_rate))
|
|
return -EINVAL;
|
|
|
|
twsi_calc_div(bus, clk_rate, speed, &m_div, &n_div);
|
|
if (m_div >= 16)
|
|
return -1;
|
|
|
|
val = (u32)(((m_div & 0xf) << 3) | ((n_div & 0x7) << 0)) |
|
|
FIELD_PREP(TWSI_SW_EOP_IA_MASK, TWSI_CLKCTL) |
|
|
FIELD_PREP(TWSI_SW_OP_MASK, TWSI_SW_EOP_IA) |
|
|
TWSI_SW_V;
|
|
/* Only init non-slave ports */
|
|
writeq(val, twsi->base + TWSI_SW_TWSI);
|
|
|
|
debug("%s: Wrote 0x%llx to sw_twsi\n", __func__, val);
|
|
return 0;
|
|
}
|
|
|
|
static const struct octeon_i2c_data i2c_octeon_data = {
|
|
.probe = PROBE_DT,
|
|
.reg_offs = 0x0000,
|
|
.thp = 3,
|
|
.clk_method = CLK_METHOD_OCTEON,
|
|
};
|
|
|
|
static const struct octeon_i2c_data i2c_octeontx_data = {
|
|
.probe = PROBE_PCI,
|
|
.reg_offs = 0x1000,
|
|
.thp = 24,
|
|
.clk_method = CLK_METHOD_OCTEON,
|
|
};
|
|
|
|
static const struct octeon_i2c_data i2c_octeontx2_data = {
|
|
.probe = PROBE_PCI,
|
|
.reg_offs = 0x1000,
|
|
.thp = 3,
|
|
.clk_method = CLK_METHOD_OCTEONTX2,
|
|
};
|
|
|
|
/**
|
|
* Driver probe function
|
|
*
|
|
* @dev I2C device to probe
|
|
* Return: 0 for success, otherwise error
|
|
*/
|
|
static int octeon_i2c_probe(struct udevice *dev)
|
|
{
|
|
struct octeon_twsi *twsi = dev_get_priv(dev);
|
|
u32 i2c_slave_addr;
|
|
int ret;
|
|
|
|
/* Octeon TX2 needs a different data struct */
|
|
if (device_is_compatible(dev, "cavium,thunderx-i2c"))
|
|
dev->driver_data = (long)&i2c_octeontx2_data;
|
|
|
|
twsi->data = (const struct octeon_i2c_data *)dev_get_driver_data(dev);
|
|
|
|
if (twsi->data->probe == PROBE_PCI) {
|
|
pci_dev_t bdf = dm_pci_get_bdf(dev);
|
|
|
|
debug("TWSI PCI device: %x\n", bdf);
|
|
|
|
twsi->base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0, 0, 0, PCI_REGION_TYPE,
|
|
PCI_REGION_MEM);
|
|
} else {
|
|
twsi->base = dev_remap_addr(dev);
|
|
}
|
|
twsi->base += twsi->data->reg_offs;
|
|
|
|
i2c_slave_addr = dev_read_u32_default(dev, "i2c-sda-hold-time-ns",
|
|
CFG_SYS_I2C_OCTEON_SLAVE_ADDR);
|
|
|
|
ret = clk_get_by_index(dev, 0, &twsi->clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_enable(&twsi->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
debug("TWSI bus %d at %p\n", dev_seq(dev), twsi->base);
|
|
|
|
/* Start with standard speed, real speed set via DT or cmd */
|
|
return twsi_init(twsi->base, i2c_slave_addr);
|
|
}
|
|
|
|
static const struct dm_i2c_ops octeon_i2c_ops = {
|
|
.xfer = octeon_i2c_xfer,
|
|
.set_bus_speed = octeon_i2c_set_bus_speed,
|
|
};
|
|
|
|
static const struct udevice_id octeon_i2c_ids[] = {
|
|
{ .compatible = "cavium,octeon-7890-twsi",
|
|
.data = (ulong)&i2c_octeon_data },
|
|
{ .compatible = "cavium,thunder-8890-twsi",
|
|
.data = (ulong)&i2c_octeontx_data },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(octeon_pci_twsi) = {
|
|
.name = "i2c_octeon",
|
|
.id = UCLASS_I2C,
|
|
.of_match = octeon_i2c_ids,
|
|
.probe = octeon_i2c_probe,
|
|
.priv_auto = sizeof(struct octeon_twsi),
|
|
.ops = &octeon_i2c_ops,
|
|
};
|