u-boot/drivers/sk98lin/h/skgedrv.h
wdenk 7152b1d0b3 * Add support for SK98xx driver
* Add PCI support for SL8245 board

* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
  or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
  Run IPB at 133 Mhz; adjust the MII clock frequency accordingly

* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16  MHz)
  to allow for more accurate baudrate settings
  (error now 0.7% at 115 kbps, instead of 3.5% before)

* Patch by Andreas Mohr, 4 Sep 2003:
  Fix a lot of spelling errors
2003-09-05 23:19:14 +00:00

72 lines
2.5 KiB
C

/******************************************************************************
*
* Name: skgedrv.h
* Project: GEnesis, PCI Gigabit Ethernet Adapter
* Version: $Revision: 1.6 $
* Date: $Date: 2002/07/15 15:38:01 $
* Purpose: Interface with the driver
*
******************************************************************************/
/******************************************************************************
*
* (C)Copyright 1998-2002 SysKonnect GmbH.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* The information in this file is provided "AS IS" without warranty.
*
******************************************************************************/
/******************************************************************************
*
* History:
*
* $Log: skgedrv.h,v $
* Revision 1.6 2002/07/15 15:38:01 rschmidt
* Power Management support
* Editorial changes
*
* Revision 1.5 2002/04/25 11:05:47 rschmidt
* Editorial changes
*
* Revision 1.4 1999/11/22 13:52:46 cgoos
* Changed license header to GPL.
*
* Revision 1.3 1998/12/01 13:31:39 cgoos
* SWITCH INTERN Event added.
*
* Revision 1.2 1998/11/25 08:28:38 gklug
* rmv: PORT SWITCH Event
*
* Revision 1.1 1998/09/29 06:14:07 gklug
* add: driver events (initial version)
*
*
******************************************************************************/
#ifndef __INC_SKGEDRV_H_
#define __INC_SKGEDRV_H_
/* defines ********************************************************************/
/*
* Define the driver events.
* Usually the events are defined by the destination module.
* In case of the driver we put the definition of the events here.
*/
#define SK_DRV_PORT_RESET 1 /* The port needs to be reset */
#define SK_DRV_NET_UP 2 /* The net is operational */
#define SK_DRV_NET_DOWN 3 /* The net is down */
#define SK_DRV_SWITCH_SOFT 4 /* Ports switch with both links connected */
#define SK_DRV_SWITCH_HARD 5 /* Port switch due to link failure */
#define SK_DRV_RLMT_SEND 6 /* Send a RLMT packet */
#define SK_DRV_ADAP_FAIL 7 /* The whole adapter fails */
#define SK_DRV_PORT_FAIL 8 /* One port fails */
#define SK_DRV_SWITCH_INTERN 9 /* Port switch by the driver itself */
#define SK_DRV_POWER_DOWN 10 /* Power down mode */
#endif /* __INC_SKGEDRV_H_ */