u-boot/drivers/sk98lin/h/skerror.h
wdenk 7152b1d0b3 * Add support for SK98xx driver
* Add PCI support for SL8245 board

* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
  or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
  Run IPB at 133 Mhz; adjust the MII clock frequency accordingly

* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16  MHz)
  to allow for more accurate baudrate settings
  (error now 0.7% at 115 kbps, instead of 3.5% before)

* Patch by Andreas Mohr, 4 Sep 2003:
  Fix a lot of spelling errors
2003-09-05 23:19:14 +00:00

80 lines
2.7 KiB
C

/******************************************************************************
*
* Name: skerror.h
* Project: GEnesis, PCI Gigabit Ethernet Adapter
* Version: $Revision: 1.5 $
* Date: $Date: 2002/04/25 11:05:10 $
* Purpose: SK specific Error log support
*
******************************************************************************/
/******************************************************************************
*
* (C)Copyright 1998-2002 SysKonnect GmbH.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* The information in this file is provided "AS IS" without warranty.
*
******************************************************************************/
/******************************************************************************
*
* History:
* $Log: skerror.h,v $
* Revision 1.5 2002/04/25 11:05:10 rschmidt
* Editorial changes
*
* Revision 1.4 1999/11/22 13:51:59 cgoos
* Changed license header to GPL.
*
* Revision 1.3 1999/09/14 14:04:42 rwahl
* Added error base SK_ERRBASE_PECP.
* Changed error base for driver.
*
* Revision 1.2 1998/08/11 11:15:41 gklug
* chg: comments
*
* Revision 1.1 1998/08/11 11:09:38 gklug
* add: error bases
* add: error Classes
* first version
*
*
*
******************************************************************************/
#ifndef _INC_SKERROR_H_
#define _INC_SKERROR_H_
/*
* Define Error Classes
*/
#define SK_ERRCL_OTHER (0) /* Other error */
#define SK_ERRCL_CONFIG (1L<<0) /* Configuration error */
#define SK_ERRCL_INIT (1L<<1) /* Initialization error */
#define SK_ERRCL_NORES (1L<<2) /* Out of Resources error */
#define SK_ERRCL_SW (1L<<3) /* Internal Software error */
#define SK_ERRCL_HW (1L<<4) /* Hardware Failure */
#define SK_ERRCL_COMM (1L<<5) /* Communication error */
/*
* Define Error Code Bases
*/
#define SK_ERRBASE_RLMT 100 /* Base Error number for RLMT */
#define SK_ERRBASE_HWINIT 200 /* Base Error number for HWInit */
#define SK_ERRBASE_VPD 300 /* Base Error number for VPD */
#define SK_ERRBASE_PNMI 400 /* Base Error number for PNMI */
#define SK_ERRBASE_CSUM 500 /* Base Error number for Checksum */
#define SK_ERRBASE_SIRQ 600 /* Base Error number for Special IRQ */
#define SK_ERRBASE_I2C 700 /* Base Error number for I2C module */
#define SK_ERRBASE_QUEUE 800 /* Base Error number for Scheduler */
#define SK_ERRBASE_ADDR 900 /* Base Error number for Address module */
#define SK_ERRBASE_PECP 1000 /* Base Error number for PECP */
#define SK_ERRBASE_DRV 1100 /* Base Error number for Driver */
#endif /* _INC_SKERROR_H_ */