mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 17:58:23 +00:00
e8c19ffa98
Half DQ configuration seems to be very rare for H6 based boards/STBs, but exists nevertheless. Currently the only known product which needs this support is Tanix TX6 mini. This commit adds support for half DQ configuration. Code was tested for regressions on other configurations (OrangePi 3 1 GiB/LPDDR3, Tanix TX6 4 GiB/DDR3) and none were found. Thanks to Icenowy Zheng for help with this code. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Tested-by: thomas graichen <thomas.graichen@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Maxime Ripard <mripard@kernel.org>
684 lines
20 KiB
C
684 lines
20 KiB
C
/*
|
|
* sun50i H6 platform dram controller init
|
|
*
|
|
* (C) Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/dram.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/kconfig.h>
|
|
|
|
/*
|
|
* The DRAM controller structure on H6 is similar to the ones on A23/A80:
|
|
* they all contains 3 parts, COM, CTL and PHY. (As a note on A33/A83T/H3/A64
|
|
* /H5/R40 CTL and PHY is composed).
|
|
*
|
|
* COM is allwinner-specific. On H6, the address mapping function is moved
|
|
* from COM to CTL (with the standard ADDRMAP registers on DesignWare memory
|
|
* controller).
|
|
*
|
|
* CTL (controller) and PHY is from DesignWare.
|
|
*
|
|
* The CTL part is a bit similar to the one on A23/A80 (because they all
|
|
* originate from DesignWare), but gets more registers added.
|
|
*
|
|
* The PHY part is quite new, not seen in any previous Allwinner SoCs, and
|
|
* not seen on other SoCs in U-Boot. The only SoC that is also known to have
|
|
* similar PHY is ZynqMP.
|
|
*/
|
|
|
|
static void mctl_sys_init(struct dram_para *para);
|
|
static void mctl_com_init(struct dram_para *para);
|
|
static void mctl_channel_init(struct dram_para *para);
|
|
|
|
static void mctl_core_init(struct dram_para *para)
|
|
{
|
|
mctl_sys_init(para);
|
|
mctl_com_init(para);
|
|
switch (para->type) {
|
|
case SUNXI_DRAM_TYPE_LPDDR3:
|
|
case SUNXI_DRAM_TYPE_DDR3:
|
|
mctl_set_timing_params(para);
|
|
break;
|
|
default:
|
|
panic("Unsupported DRAM type!");
|
|
};
|
|
mctl_channel_init(para);
|
|
}
|
|
|
|
/* PHY initialisation */
|
|
static void mctl_phy_pir_init(u32 val)
|
|
{
|
|
struct sunxi_mctl_phy_reg * const mctl_phy =
|
|
(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
|
|
|
|
writel(val, &mctl_phy->pir);
|
|
writel(val | BIT(0), &mctl_phy->pir); /* Start initialisation. */
|
|
mctl_await_completion(&mctl_phy->pgsr[0], BIT(0), BIT(0));
|
|
}
|
|
|
|
enum {
|
|
MBUS_PORT_CPU = 0,
|
|
MBUS_PORT_GPU = 1,
|
|
MBUS_PORT_MAHB = 2,
|
|
MBUS_PORT_DMA = 3,
|
|
MBUS_PORT_VE = 4,
|
|
MBUS_PORT_CE = 5,
|
|
MBUS_PORT_TSC0 = 6,
|
|
MBUS_PORT_NDFC0 = 8,
|
|
MBUS_PORT_CSI0 = 11,
|
|
MBUS_PORT_DI0 = 14,
|
|
MBUS_PORT_DI1 = 15,
|
|
MBUS_PORT_DE300 = 16,
|
|
MBUS_PORT_IOMMU = 25,
|
|
MBUS_PORT_VE2 = 26,
|
|
MBUS_PORT_USB3 = 37,
|
|
MBUS_PORT_PCIE = 38,
|
|
MBUS_PORT_VP9 = 39,
|
|
MBUS_PORT_HDCP2 = 40,
|
|
};
|
|
|
|
enum {
|
|
MBUS_QOS_LOWEST = 0,
|
|
MBUS_QOS_LOW,
|
|
MBUS_QOS_HIGH,
|
|
MBUS_QOS_HIGHEST
|
|
};
|
|
inline void mbus_configure_port(u8 port,
|
|
bool bwlimit,
|
|
bool priority,
|
|
u8 qos,
|
|
u8 waittime,
|
|
u8 acs,
|
|
u16 bwl0,
|
|
u16 bwl1,
|
|
u16 bwl2)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
|
|
const u32 cfg0 = ( (bwlimit ? (1 << 0) : 0)
|
|
| (priority ? (1 << 1) : 0)
|
|
| ((qos & 0x3) << 2)
|
|
| ((waittime & 0xf) << 4)
|
|
| ((acs & 0xff) << 8)
|
|
| (bwl0 << 16) );
|
|
const u32 cfg1 = ((u32)bwl2 << 16) | (bwl1 & 0xffff);
|
|
|
|
debug("MBUS port %d cfg0 %08x cfg1 %08x\n", port, cfg0, cfg1);
|
|
writel(cfg0, &mctl_com->master[port].cfg0);
|
|
writel(cfg1, &mctl_com->master[port].cfg1);
|
|
}
|
|
|
|
#define MBUS_CONF(port, bwlimit, qos, acs, bwl0, bwl1, bwl2) \
|
|
mbus_configure_port(MBUS_PORT_ ## port, bwlimit, false, \
|
|
MBUS_QOS_ ## qos, 0, acs, bwl0, bwl1, bwl2)
|
|
|
|
static void mctl_set_master_priority(void)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
|
|
/* enable bandwidth limit windows and set windows size 1us */
|
|
writel(399, &mctl_com->tmr);
|
|
writel(BIT(16), &mctl_com->bwcr);
|
|
|
|
MBUS_CONF( CPU, true, HIGHEST, 0, 256, 128, 100);
|
|
MBUS_CONF( GPU, true, HIGH, 0, 1536, 1400, 256);
|
|
MBUS_CONF( MAHB, true, HIGHEST, 0, 512, 256, 96);
|
|
MBUS_CONF( DMA, true, HIGH, 0, 256, 100, 80);
|
|
MBUS_CONF( VE, true, HIGH, 2, 8192, 5500, 5000);
|
|
MBUS_CONF( CE, true, HIGH, 2, 100, 64, 32);
|
|
MBUS_CONF( TSC0, true, HIGH, 2, 100, 64, 32);
|
|
MBUS_CONF(NDFC0, true, HIGH, 0, 256, 128, 64);
|
|
MBUS_CONF( CSI0, true, HIGH, 0, 256, 128, 100);
|
|
MBUS_CONF( DI0, true, HIGH, 0, 1024, 256, 64);
|
|
MBUS_CONF(DE300, true, HIGHEST, 6, 8192, 2800, 2400);
|
|
MBUS_CONF(IOMMU, true, HIGHEST, 0, 100, 64, 32);
|
|
MBUS_CONF( VE2, true, HIGH, 2, 8192, 5500, 5000);
|
|
MBUS_CONF( USB3, true, HIGH, 0, 256, 128, 64);
|
|
MBUS_CONF( PCIE, true, HIGH, 2, 100, 64, 32);
|
|
MBUS_CONF( VP9, true, HIGH, 2, 8192, 5500, 5000);
|
|
MBUS_CONF(HDCP2, true, HIGH, 2, 100, 64, 32);
|
|
}
|
|
|
|
static void mctl_sys_init(struct dram_para *para)
|
|
{
|
|
struct sunxi_ccm_reg * const ccm =
|
|
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
struct sunxi_mctl_ctl_reg * const mctl_ctl =
|
|
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
|
|
|
|
/* Put all DRAM-related blocks to reset state */
|
|
clrbits_le32(&ccm->mbus_cfg, MBUS_ENABLE | MBUS_RESET);
|
|
clrbits_le32(&ccm->dram_gate_reset, BIT(0));
|
|
udelay(5);
|
|
writel(0, &ccm->dram_gate_reset);
|
|
clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN);
|
|
clrbits_le32(&ccm->dram_clk_cfg, DRAM_MOD_RESET);
|
|
|
|
udelay(5);
|
|
|
|
/* Set PLL5 rate to doubled DRAM clock rate */
|
|
writel(CCM_PLL5_CTRL_EN | CCM_PLL5_LOCK_EN |
|
|
CCM_PLL5_CTRL_N(para->clk * 2 / 24 - 1), &ccm->pll5_cfg);
|
|
mctl_await_completion(&ccm->pll5_cfg, CCM_PLL5_LOCK, CCM_PLL5_LOCK);
|
|
|
|
/* Configure DRAM mod clock */
|
|
writel(DRAM_CLK_SRC_PLL5, &ccm->dram_clk_cfg);
|
|
setbits_le32(&ccm->dram_clk_cfg, DRAM_CLK_UPDATE);
|
|
writel(BIT(RESET_SHIFT), &ccm->dram_gate_reset);
|
|
udelay(5);
|
|
setbits_le32(&ccm->dram_gate_reset, BIT(0));
|
|
|
|
/* Disable all channels */
|
|
writel(0, &mctl_com->maer0);
|
|
writel(0, &mctl_com->maer1);
|
|
writel(0, &mctl_com->maer2);
|
|
|
|
/* Configure MBUS and enable DRAM mod reset */
|
|
setbits_le32(&ccm->mbus_cfg, MBUS_RESET);
|
|
setbits_le32(&ccm->mbus_cfg, MBUS_ENABLE);
|
|
setbits_le32(&ccm->dram_clk_cfg, DRAM_MOD_RESET);
|
|
udelay(5);
|
|
|
|
/* Unknown hack from the BSP, which enables access of mctl_ctl regs */
|
|
writel(0x8000, &mctl_ctl->unk_0x00c);
|
|
}
|
|
|
|
static void mctl_set_addrmap(struct dram_para *para)
|
|
{
|
|
struct sunxi_mctl_ctl_reg * const mctl_ctl =
|
|
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
|
|
u8 cols = para->cols;
|
|
u8 rows = para->rows;
|
|
u8 ranks = para->ranks;
|
|
|
|
if (!para->bus_full_width)
|
|
cols -= 1;
|
|
|
|
/* Ranks */
|
|
if (ranks == 2)
|
|
mctl_ctl->addrmap[0] = rows + cols - 3;
|
|
else
|
|
mctl_ctl->addrmap[0] = 0x1F;
|
|
|
|
/* Banks, hardcoded to 8 banks now */
|
|
mctl_ctl->addrmap[1] = (cols - 2) | (cols - 2) << 8 | (cols - 2) << 16;
|
|
|
|
/* Columns */
|
|
mctl_ctl->addrmap[2] = 0;
|
|
switch (cols) {
|
|
case 7:
|
|
mctl_ctl->addrmap[3] = 0x1F1F1F00;
|
|
mctl_ctl->addrmap[4] = 0x1F1F;
|
|
break;
|
|
case 8:
|
|
mctl_ctl->addrmap[3] = 0x1F1F0000;
|
|
mctl_ctl->addrmap[4] = 0x1F1F;
|
|
break;
|
|
case 9:
|
|
mctl_ctl->addrmap[3] = 0x1F000000;
|
|
mctl_ctl->addrmap[4] = 0x1F1F;
|
|
break;
|
|
case 10:
|
|
mctl_ctl->addrmap[3] = 0;
|
|
mctl_ctl->addrmap[4] = 0x1F1F;
|
|
break;
|
|
case 11:
|
|
mctl_ctl->addrmap[3] = 0;
|
|
mctl_ctl->addrmap[4] = 0x1F00;
|
|
break;
|
|
case 12:
|
|
mctl_ctl->addrmap[3] = 0;
|
|
mctl_ctl->addrmap[4] = 0;
|
|
break;
|
|
default:
|
|
panic("Unsupported DRAM configuration: column number invalid\n");
|
|
}
|
|
|
|
/* Rows */
|
|
mctl_ctl->addrmap[5] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
|
|
switch (rows) {
|
|
case 13:
|
|
mctl_ctl->addrmap[6] = (cols - 3) | 0x0F0F0F00;
|
|
mctl_ctl->addrmap[7] = 0x0F0F;
|
|
break;
|
|
case 14:
|
|
mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | 0x0F0F0000;
|
|
mctl_ctl->addrmap[7] = 0x0F0F;
|
|
break;
|
|
case 15:
|
|
mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | 0x0F000000;
|
|
mctl_ctl->addrmap[7] = 0x0F0F;
|
|
break;
|
|
case 16:
|
|
mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
|
|
mctl_ctl->addrmap[7] = 0x0F0F;
|
|
break;
|
|
case 17:
|
|
mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
|
|
mctl_ctl->addrmap[7] = (cols - 3) | 0x0F00;
|
|
break;
|
|
case 18:
|
|
mctl_ctl->addrmap[6] = (cols - 3) | ((cols - 3) << 8) | ((cols - 3) << 16) | ((cols - 3) << 24);
|
|
mctl_ctl->addrmap[7] = (cols - 3) | ((cols - 3) << 8);
|
|
break;
|
|
default:
|
|
panic("Unsupported DRAM configuration: row number invalid\n");
|
|
}
|
|
|
|
/* Bank groups, DDR4 only */
|
|
mctl_ctl->addrmap[8] = 0x3F3F;
|
|
}
|
|
|
|
static void mctl_com_init(struct dram_para *para)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
struct sunxi_mctl_ctl_reg * const mctl_ctl =
|
|
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
|
|
struct sunxi_mctl_phy_reg * const mctl_phy =
|
|
(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
|
|
u32 reg_val, tmp;
|
|
|
|
mctl_set_addrmap(para);
|
|
|
|
setbits_le32(&mctl_com->cr, BIT(31));
|
|
|
|
/* The bonding ID seems to be always 7. */
|
|
if (readl(SUNXI_SIDC_BASE + 0x100) == 7) /* bonding ID */
|
|
clrbits_le32(&mctl_com->cr, BIT(27));
|
|
else if (readl(SUNXI_SIDC_BASE + 0x100) == 3)
|
|
setbits_le32(&mctl_com->cr, BIT(27));
|
|
|
|
if (para->clk > 408)
|
|
reg_val = 0xf00;
|
|
else if (para->clk > 246)
|
|
reg_val = 0x1f00;
|
|
else
|
|
reg_val = 0x3f00;
|
|
clrsetbits_le32(&mctl_com->unk_0x008, 0x3f00, reg_val);
|
|
|
|
/* TODO: DDR4 */
|
|
reg_val = MSTR_BURST_LENGTH(8) | MSTR_ACTIVE_RANKS(para->ranks);
|
|
if (para->type == SUNXI_DRAM_TYPE_LPDDR3)
|
|
reg_val |= MSTR_DEVICETYPE_LPDDR3;
|
|
if (para->type == SUNXI_DRAM_TYPE_DDR3)
|
|
reg_val |= MSTR_DEVICETYPE_DDR3 | MSTR_2TMODE;
|
|
if (para->bus_full_width)
|
|
reg_val |= MSTR_BUSWIDTH_FULL;
|
|
else
|
|
reg_val |= MSTR_BUSWIDTH_HALF;
|
|
writel(reg_val | BIT(31), &mctl_ctl->mstr);
|
|
|
|
if (para->type == SUNXI_DRAM_TYPE_LPDDR3)
|
|
reg_val = DCR_LPDDR3 | DCR_DDR8BANK;
|
|
if (para->type == SUNXI_DRAM_TYPE_DDR3)
|
|
reg_val = DCR_DDR3 | DCR_DDR8BANK | DCR_DDR2T;
|
|
writel(reg_val | 0x400, &mctl_phy->dcr);
|
|
|
|
if (para->ranks == 2)
|
|
writel(0x0303, &mctl_ctl->odtmap);
|
|
else
|
|
writel(0x0201, &mctl_ctl->odtmap);
|
|
|
|
/* TODO: DDR4 */
|
|
if (para->type == SUNXI_DRAM_TYPE_LPDDR3) {
|
|
tmp = para->clk * 7 / 2000;
|
|
reg_val = 0x0400;
|
|
reg_val |= (tmp + 7) << 24;
|
|
reg_val |= (((para->clk < 400) ? 3 : 4) - tmp) << 16;
|
|
} else if (para->type == SUNXI_DRAM_TYPE_DDR3) {
|
|
reg_val = 0x06000400; /* TODO?: Use CL - CWL value in [7:0] */
|
|
} else {
|
|
panic("Only (LP)DDR3 supported (type = %d)\n", para->type);
|
|
}
|
|
writel(reg_val, &mctl_ctl->odtcfg);
|
|
|
|
if (!para->bus_full_width) {
|
|
writel(0x0, &mctl_phy->dx[2].gcr[0]);
|
|
writel(0x0, &mctl_phy->dx[3].gcr[0]);
|
|
}
|
|
}
|
|
|
|
static void mctl_bit_delay_set(struct dram_para *para)
|
|
{
|
|
struct sunxi_mctl_phy_reg * const mctl_phy =
|
|
(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
|
|
int i, j;
|
|
u32 val;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
val = readl(&mctl_phy->dx[i].bdlr0);
|
|
for (j = 0; j < 4; j++)
|
|
val += para->dx_write_delays[i][j] << (j * 8);
|
|
writel(val, &mctl_phy->dx[i].bdlr0);
|
|
|
|
val = readl(&mctl_phy->dx[i].bdlr1);
|
|
for (j = 0; j < 4; j++)
|
|
val += para->dx_write_delays[i][j + 4] << (j * 8);
|
|
writel(val, &mctl_phy->dx[i].bdlr1);
|
|
|
|
val = readl(&mctl_phy->dx[i].bdlr2);
|
|
for (j = 0; j < 4; j++)
|
|
val += para->dx_write_delays[i][j + 8] << (j * 8);
|
|
writel(val, &mctl_phy->dx[i].bdlr2);
|
|
}
|
|
clrbits_le32(&mctl_phy->pgcr[0], BIT(26));
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
val = readl(&mctl_phy->dx[i].bdlr3);
|
|
for (j = 0; j < 4; j++)
|
|
val += para->dx_read_delays[i][j] << (j * 8);
|
|
writel(val, &mctl_phy->dx[i].bdlr3);
|
|
|
|
val = readl(&mctl_phy->dx[i].bdlr4);
|
|
for (j = 0; j < 4; j++)
|
|
val += para->dx_read_delays[i][j + 4] << (j * 8);
|
|
writel(val, &mctl_phy->dx[i].bdlr4);
|
|
|
|
val = readl(&mctl_phy->dx[i].bdlr5);
|
|
for (j = 0; j < 4; j++)
|
|
val += para->dx_read_delays[i][j + 8] << (j * 8);
|
|
writel(val, &mctl_phy->dx[i].bdlr5);
|
|
|
|
val = readl(&mctl_phy->dx[i].bdlr6);
|
|
val += (para->dx_read_delays[i][12] << 8) |
|
|
(para->dx_read_delays[i][13] << 16);
|
|
writel(val, &mctl_phy->dx[i].bdlr6);
|
|
}
|
|
setbits_le32(&mctl_phy->pgcr[0], BIT(26));
|
|
udelay(1);
|
|
|
|
if (para->type != SUNXI_DRAM_TYPE_LPDDR3)
|
|
return;
|
|
|
|
for (i = 1; i < 14; i++) {
|
|
val = readl(&mctl_phy->acbdlr[i]);
|
|
val += 0x0a0a0a0a;
|
|
writel(val, &mctl_phy->acbdlr[i]);
|
|
}
|
|
}
|
|
|
|
static void mctl_channel_init(struct dram_para *para)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
struct sunxi_mctl_ctl_reg * const mctl_ctl =
|
|
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
|
|
struct sunxi_mctl_phy_reg * const mctl_phy =
|
|
(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
|
|
int i;
|
|
u32 val;
|
|
|
|
setbits_le32(&mctl_ctl->dfiupd[0], BIT(31) | BIT(30));
|
|
setbits_le32(&mctl_ctl->zqctl[0], BIT(31) | BIT(30));
|
|
writel(0x2f05, &mctl_ctl->sched[0]);
|
|
setbits_le32(&mctl_ctl->rfshctl3, BIT(0));
|
|
setbits_le32(&mctl_ctl->dfimisc, BIT(0));
|
|
setbits_le32(&mctl_ctl->unk_0x00c, BIT(8));
|
|
clrsetbits_le32(&mctl_phy->pgcr[1], 0x180, 0xc0);
|
|
/* TODO: non-LPDDR3 types */
|
|
clrsetbits_le32(&mctl_phy->pgcr[2], GENMASK(17, 0), ns_to_t(7800));
|
|
clrbits_le32(&mctl_phy->pgcr[6], BIT(0));
|
|
clrsetbits_le32(&mctl_phy->dxccr, 0xee0, 0x220);
|
|
/* TODO: VT compensation */
|
|
clrsetbits_le32(&mctl_phy->dsgcr, BIT(0), 0x440060);
|
|
clrbits_le32(&mctl_phy->vtcr[1], BIT(1));
|
|
|
|
for (i = 0; i < 4; i++)
|
|
clrsetbits_le32(&mctl_phy->dx[i].gcr[0], 0xe00, 0x800);
|
|
for (i = 0; i < 4; i++)
|
|
clrsetbits_le32(&mctl_phy->dx[i].gcr[2], 0xffff, 0x5555);
|
|
for (i = 0; i < 4; i++)
|
|
clrsetbits_le32(&mctl_phy->dx[i].gcr[3], 0x3030, 0x1010);
|
|
|
|
udelay(100);
|
|
|
|
if (para->ranks == 2)
|
|
setbits_le32(&mctl_phy->dtcr[1], 0x30000);
|
|
else
|
|
clrsetbits_le32(&mctl_phy->dtcr[1], 0x30000, 0x10000);
|
|
|
|
if (sunxi_dram_is_lpddr(para->type))
|
|
clrbits_le32(&mctl_phy->dtcr[1], BIT(1));
|
|
if (para->ranks == 2) {
|
|
writel(0x00010001, &mctl_phy->rankidr);
|
|
writel(0x20000, &mctl_phy->odtcr);
|
|
} else {
|
|
writel(0x0, &mctl_phy->rankidr);
|
|
writel(0x10000, &mctl_phy->odtcr);
|
|
}
|
|
|
|
/* set bits [3:0] to 1? 0 not valid in ZynqMP d/s */
|
|
if (para->type == SUNXI_DRAM_TYPE_LPDDR3)
|
|
clrsetbits_le32(&mctl_phy->dtcr[0], 0xF0000000, 0x10000040);
|
|
else
|
|
clrsetbits_le32(&mctl_phy->dtcr[0], 0xF0000000, 0x10000000);
|
|
if (para->clk <= 792) {
|
|
if (para->clk <= 672) {
|
|
if (para->clk <= 600)
|
|
val = 0x300;
|
|
else
|
|
val = 0x400;
|
|
} else {
|
|
val = 0x500;
|
|
}
|
|
} else {
|
|
val = 0x600;
|
|
}
|
|
/* FIXME: NOT REVIEWED YET */
|
|
clrsetbits_le32(&mctl_phy->zq[0].zqcr, 0x700, val);
|
|
clrsetbits_le32(&mctl_phy->zq[0].zqpr[0], 0xff,
|
|
CONFIG_DRAM_ZQ & 0xff);
|
|
clrbits_le32(&mctl_phy->zq[0].zqor[0], 0xfffff);
|
|
setbits_le32(&mctl_phy->zq[0].zqor[0], (CONFIG_DRAM_ZQ >> 8) & 0xff);
|
|
setbits_le32(&mctl_phy->zq[0].zqor[0], (CONFIG_DRAM_ZQ & 0xf00) - 0x100);
|
|
setbits_le32(&mctl_phy->zq[0].zqor[0], (CONFIG_DRAM_ZQ & 0xff00) << 4);
|
|
clrbits_le32(&mctl_phy->zq[1].zqpr[0], 0xfffff);
|
|
setbits_le32(&mctl_phy->zq[1].zqpr[0], (CONFIG_DRAM_ZQ >> 16) & 0xff);
|
|
setbits_le32(&mctl_phy->zq[1].zqpr[0], ((CONFIG_DRAM_ZQ >> 8) & 0xf00) - 0x100);
|
|
setbits_le32(&mctl_phy->zq[1].zqpr[0], (CONFIG_DRAM_ZQ & 0xff0000) >> 4);
|
|
if (para->type == SUNXI_DRAM_TYPE_LPDDR3) {
|
|
for (i = 1; i < 14; i++)
|
|
writel(0x06060606, &mctl_phy->acbdlr[i]);
|
|
}
|
|
|
|
val = PIR_ZCAL | PIR_DCAL | PIR_PHYRST | PIR_DRAMINIT | PIR_QSGATE |
|
|
PIR_RDDSKW | PIR_WRDSKW | PIR_RDEYE | PIR_WREYE;
|
|
if (para->type == SUNXI_DRAM_TYPE_DDR3)
|
|
val |= PIR_DRAMRST | PIR_WL;
|
|
mctl_phy_pir_init(val);
|
|
|
|
/* TODO: DDR4 types ? */
|
|
for (i = 0; i < 4; i++)
|
|
writel(0x00000909, &mctl_phy->dx[i].gcr[5]);
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
if (IS_ENABLED(CONFIG_DRAM_ODT_EN))
|
|
val = 0x0;
|
|
else
|
|
val = 0xaaaa;
|
|
clrsetbits_le32(&mctl_phy->dx[i].gcr[2], 0xffff, val);
|
|
|
|
if (IS_ENABLED(CONFIG_DRAM_ODT_EN))
|
|
val = 0x0;
|
|
else
|
|
val = 0x2020;
|
|
clrsetbits_le32(&mctl_phy->dx[i].gcr[3], 0x3030, val);
|
|
}
|
|
|
|
mctl_bit_delay_set(para);
|
|
udelay(1);
|
|
|
|
setbits_le32(&mctl_phy->pgcr[6], BIT(0));
|
|
clrbits_le32(&mctl_phy->pgcr[6], 0xfff8);
|
|
for (i = 0; i < 4; i++)
|
|
clrbits_le32(&mctl_phy->dx[i].gcr[3], ~0x3ffff);
|
|
udelay(10);
|
|
|
|
if (readl(&mctl_phy->pgsr[0]) & 0x400000)
|
|
{
|
|
/* Check for single rank and optionally half DQ. */
|
|
if ((readl(&mctl_phy->dx[0].rsr[0]) & 0x3) == 2 &&
|
|
(readl(&mctl_phy->dx[1].rsr[0]) & 0x3) == 2) {
|
|
para->ranks = 1;
|
|
|
|
if ((readl(&mctl_phy->dx[2].rsr[0]) & 0x3) != 2 ||
|
|
(readl(&mctl_phy->dx[3].rsr[0]) & 0x3) != 2)
|
|
para->bus_full_width = 0;
|
|
|
|
/* Restart DRAM initialization from scratch. */
|
|
mctl_core_init(para);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Check for dual rank and half DQ. NOTE: This combination
|
|
* is highly unlikely and was not tested. Condition is the
|
|
* same as in libdram, though.
|
|
*/
|
|
if ((readl(&mctl_phy->dx[0].rsr[0]) & 0x3) == 0 &&
|
|
(readl(&mctl_phy->dx[1].rsr[0]) & 0x3) == 0) {
|
|
para->bus_full_width = 0;
|
|
|
|
/* Restart DRAM initialization from scratch. */
|
|
mctl_core_init(para);
|
|
return;
|
|
}
|
|
|
|
panic("This DRAM setup is currently not supported.\n");
|
|
}
|
|
|
|
if (readl(&mctl_phy->pgsr[0]) & 0xff00000) {
|
|
/* Oops! There's something wrong! */
|
|
debug("PLL = %x\n", readl(0x3001010));
|
|
debug("DRAM PHY PGSR0 = %x\n", readl(&mctl_phy->pgsr[0]));
|
|
for (i = 0; i < 4; i++)
|
|
debug("DRAM PHY DX%dRSR0 = %x\n", i, readl(&mctl_phy->dx[i].rsr[0]));
|
|
panic("Error while initializing DRAM PHY!\n");
|
|
}
|
|
|
|
if (sunxi_dram_is_lpddr(para->type))
|
|
clrsetbits_le32(&mctl_phy->dsgcr, 0xc0, 0x40);
|
|
clrbits_le32(&mctl_phy->pgcr[1], 0x40);
|
|
clrbits_le32(&mctl_ctl->dfimisc, BIT(0));
|
|
writel(1, &mctl_ctl->swctl);
|
|
mctl_await_completion(&mctl_ctl->swstat, 1, 1);
|
|
clrbits_le32(&mctl_ctl->rfshctl3, BIT(0));
|
|
|
|
setbits_le32(&mctl_com->unk_0x014, BIT(31));
|
|
writel(0xffffffff, &mctl_com->maer0);
|
|
writel(0x7ff, &mctl_com->maer1);
|
|
writel(0xffff, &mctl_com->maer2);
|
|
}
|
|
|
|
static void mctl_auto_detect_dram_size(struct dram_para *para)
|
|
{
|
|
/* TODO: non-(LP)DDR3 */
|
|
/* Detect rank number and half DQ by the code in mctl_channel_init. */
|
|
mctl_core_init(para);
|
|
|
|
/* detect row address bits */
|
|
para->cols = 8;
|
|
para->rows = 18;
|
|
mctl_core_init(para);
|
|
|
|
for (para->rows = 13; para->rows < 18; para->rows++) {
|
|
/* 8 banks, 8 bit per byte and 16/32 bit width */
|
|
if (mctl_mem_matches((1 << (para->rows + para->cols +
|
|
4 + para->bus_full_width))))
|
|
break;
|
|
}
|
|
|
|
/* detect column address bits */
|
|
para->cols = 11;
|
|
mctl_core_init(para);
|
|
|
|
for (para->cols = 8; para->cols < 11; para->cols++) {
|
|
/* 8 bits per byte and 16/32 bit width */
|
|
if (mctl_mem_matches(1 << (para->cols + 1 +
|
|
para->bus_full_width)))
|
|
break;
|
|
}
|
|
}
|
|
|
|
unsigned long mctl_calc_size(struct dram_para *para)
|
|
{
|
|
u8 width = para->bus_full_width ? 4 : 2;
|
|
|
|
/* TODO: non-(LP)DDR3 */
|
|
|
|
/* 8 banks */
|
|
return (1ULL << (para->cols + para->rows + 3)) * width * para->ranks;
|
|
}
|
|
|
|
#define SUN50I_H6_LPDDR3_DX_WRITE_DELAYS \
|
|
{{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 4, 4, 0 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }}
|
|
#define SUN50I_H6_LPDDR3_DX_READ_DELAYS \
|
|
{{ 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }, \
|
|
{ 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }, \
|
|
{ 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }, \
|
|
{ 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }}
|
|
|
|
#define SUN50I_H6_DDR3_DX_WRITE_DELAYS \
|
|
{{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }}
|
|
#define SUN50I_H6_DDR3_DX_READ_DELAYS \
|
|
{{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \
|
|
{ 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 0, 0, 0, 0 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \
|
|
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }}
|
|
|
|
unsigned long sunxi_dram_init(void)
|
|
{
|
|
struct sunxi_mctl_com_reg * const mctl_com =
|
|
(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
|
|
struct dram_para para = {
|
|
.clk = CONFIG_DRAM_CLK,
|
|
.ranks = 2,
|
|
.cols = 11,
|
|
.rows = 14,
|
|
.bus_full_width = 1,
|
|
#ifdef CONFIG_SUNXI_DRAM_H6_LPDDR3
|
|
.type = SUNXI_DRAM_TYPE_LPDDR3,
|
|
.dx_read_delays = SUN50I_H6_LPDDR3_DX_READ_DELAYS,
|
|
.dx_write_delays = SUN50I_H6_LPDDR3_DX_WRITE_DELAYS,
|
|
#elif defined(CONFIG_SUNXI_DRAM_H6_DDR3_1333)
|
|
.type = SUNXI_DRAM_TYPE_DDR3,
|
|
.dx_read_delays = SUN50I_H6_DDR3_DX_READ_DELAYS,
|
|
.dx_write_delays = SUN50I_H6_DDR3_DX_WRITE_DELAYS,
|
|
#endif
|
|
};
|
|
|
|
unsigned long size;
|
|
|
|
/* RES_CAL_CTRL_REG in BSP U-boot*/
|
|
setbits_le32(0x7010310, BIT(8));
|
|
clrbits_le32(0x7010318, 0x3f);
|
|
|
|
mctl_auto_detect_dram_size(¶);
|
|
|
|
mctl_core_init(¶);
|
|
|
|
size = mctl_calc_size(¶);
|
|
|
|
clrsetbits_le32(&mctl_com->cr, 0xf0, (size >> (10 + 10 + 4)) & 0xf0);
|
|
|
|
mctl_set_master_priority();
|
|
|
|
return size;
|
|
};
|