mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 10:48:51 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
419 lines
10 KiB
C
419 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
||
/*
|
||
* Copyright 2015 Freescale Semiconductor, Inc.
|
||
*/
|
||
|
||
#include <common.h>
|
||
#include <asm/io.h>
|
||
#include <linux/errno.h>
|
||
#include <asm/arch/fsl_serdes.h>
|
||
#include <asm/arch/soc.h>
|
||
|
||
#ifdef CONFIG_SYS_FSL_SRDS_1
|
||
static u8 serdes1_prtcl_map[SERDES_PRCTL_COUNT];
|
||
#endif
|
||
#ifdef CONFIG_SYS_FSL_SRDS_2
|
||
static u8 serdes2_prtcl_map[SERDES_PRCTL_COUNT];
|
||
#endif
|
||
|
||
int is_serdes_configured(enum srds_prtcl device)
|
||
{
|
||
int ret = 0;
|
||
|
||
#ifdef CONFIG_SYS_FSL_SRDS_1
|
||
if (!serdes1_prtcl_map[NONE])
|
||
fsl_serdes_init();
|
||
|
||
ret |= serdes1_prtcl_map[device];
|
||
#endif
|
||
#ifdef CONFIG_SYS_FSL_SRDS_2
|
||
if (!serdes2_prtcl_map[NONE])
|
||
fsl_serdes_init();
|
||
|
||
ret |= serdes2_prtcl_map[device];
|
||
#endif
|
||
|
||
return !!ret;
|
||
}
|
||
|
||
int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
|
||
{
|
||
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
|
||
u32 cfg = gur_in32(&gur->rcwsr[4]);
|
||
int i;
|
||
|
||
switch (sd) {
|
||
#ifdef CONFIG_SYS_FSL_SRDS_1
|
||
case FSL_SRDS_1:
|
||
cfg &= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
|
||
cfg >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
|
||
break;
|
||
#endif
|
||
#ifdef CONFIG_SYS_FSL_SRDS_2
|
||
case FSL_SRDS_2:
|
||
cfg &= FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_MASK;
|
||
cfg >>= FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_SHIFT;
|
||
break;
|
||
#endif
|
||
default:
|
||
printf("invalid SerDes%d\n", sd);
|
||
break;
|
||
}
|
||
|
||
/* Is serdes enabled at all? */
|
||
if (unlikely(cfg == 0))
|
||
return -ENODEV;
|
||
|
||
for (i = 0; i < SRDS_MAX_LANES; i++) {
|
||
if (serdes_get_prtcl(sd, cfg, i) == device)
|
||
return i;
|
||
}
|
||
|
||
return -ENODEV;
|
||
}
|
||
|
||
int get_serdes_protocol(void)
|
||
{
|
||
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
|
||
u32 cfg = gur_in32(&gur->rcwsr[4]) &
|
||
FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
|
||
cfg >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
|
||
|
||
return cfg;
|
||
}
|
||
|
||
const char *serdes_clock_to_string(u32 clock)
|
||
{
|
||
switch (clock) {
|
||
case SRDS_PLLCR0_RFCK_SEL_100:
|
||
return "100";
|
||
case SRDS_PLLCR0_RFCK_SEL_125:
|
||
return "125";
|
||
case SRDS_PLLCR0_RFCK_SEL_156_25:
|
||
return "156.25";
|
||
default:
|
||
return "100";
|
||
}
|
||
}
|
||
|
||
void serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift,
|
||
u8 serdes_prtcl_map[SERDES_PRCTL_COUNT])
|
||
{
|
||
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
|
||
u32 cfg;
|
||
int lane;
|
||
|
||
if (serdes_prtcl_map[NONE])
|
||
return;
|
||
|
||
memset(serdes_prtcl_map, 0, sizeof(u8) * SERDES_PRCTL_COUNT);
|
||
|
||
cfg = gur_in32(&gur->rcwsr[4]) & sd_prctl_mask;
|
||
cfg >>= sd_prctl_shift;
|
||
printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg);
|
||
|
||
if (!is_serdes_prtcl_valid(sd, cfg))
|
||
printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg);
|
||
|
||
for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
|
||
enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane);
|
||
|
||
if (unlikely(lane_prtcl >= SERDES_PRCTL_COUNT))
|
||
debug("Unknown SerDes lane protocol %d\n", lane_prtcl);
|
||
else
|
||
serdes_prtcl_map[lane_prtcl] = 1;
|
||
}
|
||
|
||
/* Set the first element to indicate serdes has been initialized */
|
||
serdes_prtcl_map[NONE] = 1;
|
||
}
|
||
|
||
__weak int get_serdes_volt(void)
|
||
{
|
||
return -1;
|
||
}
|
||
|
||
__weak int set_serdes_volt(int svdd)
|
||
{
|
||
return -1;
|
||
}
|
||
|
||
int setup_serdes_volt(u32 svdd)
|
||
{
|
||
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
|
||
struct ccsr_serdes *serdes1_base;
|
||
#ifdef CONFIG_SYS_FSL_SRDS_2
|
||
struct ccsr_serdes *serdes2_base;
|
||
#endif
|
||
u32 cfg_rcw4 = gur_in32(&gur->rcwsr[4]);
|
||
u32 cfg_rcw5 = gur_in32(&gur->rcwsr[5]);
|
||
u32 cfg_tmp, reg = 0;
|
||
int svdd_cur, svdd_tar;
|
||
int ret;
|
||
int i;
|
||
|
||
/* Only support switch SVDD to 900mV/1000mV */
|
||
if (svdd != 900 && svdd != 1000)
|
||
return -EINVAL;
|
||
|
||
svdd_tar = svdd;
|
||
svdd_cur = get_serdes_volt();
|
||
if (svdd_cur < 0)
|
||
return -EINVAL;
|
||
|
||
debug("%s: current SVDD: %dmV; target SVDD: %dmV\n",
|
||
__func__, svdd_cur, svdd_tar);
|
||
if (svdd_cur == svdd_tar)
|
||
return 0;
|
||
|
||
serdes1_base = (void *)CONFIG_SYS_FSL_SERDES_ADDR;
|
||
#ifdef CONFIG_SYS_FSL_SRDS_2
|
||
serdes2_base = (void *)serdes1_base + 0x10000;
|
||
#endif
|
||
|
||
/* Put the all enabled lanes in reset */
|
||
#ifdef CONFIG_SYS_FSL_SRDS_1
|
||
cfg_tmp = cfg_rcw4 & FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
|
||
cfg_tmp >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
|
||
|
||
for (i = 0; i < 4 && cfg_tmp & (0xf << (3 - i)); i++) {
|
||
reg = in_be32(&serdes1_base->lane[i].gcr0);
|
||
reg &= 0xFF9FFFFF;
|
||
out_be32(&serdes1_base->lane[i].gcr0, reg);
|
||
}
|
||
#endif
|
||
#ifdef CONFIG_SYS_FSL_SRDS_2
|
||
cfg_tmp = cfg_rcw4 & FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_MASK;
|
||
cfg_tmp >>= FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_SHIFT;
|
||
|
||
for (i = 0; i < 4 && cfg_tmp & (0xf << (3 - i)); i++) {
|
||
reg = in_be32(&serdes2_base->lane[i].gcr0);
|
||
reg &= 0xFF9FFFFF;
|
||
out_be32(&serdes2_base->lane[i].gcr0, reg);
|
||
}
|
||
#endif
|
||
|
||
/* Put the all enabled PLL in reset */
|
||
#ifdef CONFIG_SYS_FSL_SRDS_1
|
||
cfg_tmp = (cfg_rcw5 >> 22) & 0x3;
|
||
for (i = 0; i < 2 && !(cfg_tmp & (0x1 << (1 - i))); i++) {
|
||
reg = in_be32(&serdes1_base->bank[i].rstctl);
|
||
reg &= 0xFFFFFFBF;
|
||
reg |= 0x10000000;
|
||
out_be32(&serdes1_base->bank[i].rstctl, reg);
|
||
udelay(1);
|
||
|
||
reg = in_be32(&serdes1_base->bank[i].rstctl);
|
||
reg &= 0xFFFFFF1F;
|
||
out_be32(&serdes1_base->bank[i].rstctl, reg);
|
||
}
|
||
udelay(1);
|
||
#endif
|
||
|
||
#ifdef CONFIG_SYS_FSL_SRDS_2
|
||
cfg_tmp = (cfg_rcw5 >> 20) & 0x3;
|
||
for (i = 0; i < 2 && !(cfg_tmp & (0x1 << (1 - i))); i++) {
|
||
reg = in_be32(&serdes2_base->bank[i].rstctl);
|
||
reg &= 0xFFFFFFBF;
|
||
reg |= 0x10000000;
|
||
out_be32(&serdes2_base->bank[i].rstctl, reg);
|
||
udelay(1);
|
||
|
||
reg = in_be32(&serdes2_base->bank[i].rstctl);
|
||
reg &= 0xFFFFFF1F;
|
||
out_be32(&serdes2_base->bank[i].rstctl, reg);
|
||
}
|
||
udelay(1);
|
||
#endif
|
||
|
||
/* Put the Rx/Tx calibration into reset */
|
||
#ifdef CONFIG_SYS_FSL_SRDS_1
|
||
reg = in_be32(&serdes1_base->srdstcalcr);
|
||
reg &= 0xF7FFFFFF;
|
||
out_be32(&serdes1_base->srdstcalcr, reg);
|
||
reg = in_be32(&serdes1_base->srdsrcalcr);
|
||
reg &= 0xF7FFFFFF;
|
||
out_be32(&serdes1_base->srdsrcalcr, reg);
|
||
|
||
#endif
|
||
#ifdef CONFIG_SYS_FSL_SRDS_2
|
||
reg = in_be32(&serdes2_base->srdstcalcr);
|
||
reg &= 0xF7FFFFFF;
|
||
out_be32(&serdes2_base->srdstcalcr, reg);
|
||
reg = in_be32(&serdes2_base->srdsrcalcr);
|
||
reg &= 0xF7FFFFFF;
|
||
out_be32(&serdes2_base->srdsrcalcr, reg);
|
||
#endif
|
||
|
||
/*
|
||
* If SVDD set failed, will not return directly, so that the
|
||
* serdes lanes can complete reseting.
|
||
*/
|
||
ret = set_serdes_volt(svdd_tar);
|
||
if (ret)
|
||
printf("%s: Failed to set SVDD\n", __func__);
|
||
|
||
/* Wait for SVDD to stabilize */
|
||
udelay(100);
|
||
|
||
/* For each PLL that’s not disabled via RCW */
|
||
#ifdef CONFIG_SYS_FSL_SRDS_1
|
||
cfg_tmp = (cfg_rcw5 >> 22) & 0x3;
|
||
for (i = 0; i < 2 && !(cfg_tmp & (0x1 << (1 - i))); i++) {
|
||
reg = in_be32(&serdes1_base->bank[i].rstctl);
|
||
reg |= 0x00000020;
|
||
out_be32(&serdes1_base->bank[i].rstctl, reg);
|
||
udelay(1);
|
||
|
||
reg = in_be32(&serdes1_base->bank[i].rstctl);
|
||
reg |= 0x00000080;
|
||
out_be32(&serdes1_base->bank[i].rstctl, reg);
|
||
|
||
/* Take the Rx/Tx calibration out of reset */
|
||
if (!(cfg_tmp == 0x3 && i == 1)) {
|
||
udelay(1);
|
||
reg = in_be32(&serdes1_base->srdstcalcr);
|
||
reg |= 0x08000000;
|
||
out_be32(&serdes1_base->srdstcalcr, reg);
|
||
reg = in_be32(&serdes1_base->srdsrcalcr);
|
||
reg |= 0x08000000;
|
||
out_be32(&serdes1_base->srdsrcalcr, reg);
|
||
}
|
||
}
|
||
udelay(1);
|
||
#endif
|
||
|
||
#ifdef CONFIG_SYS_FSL_SRDS_2
|
||
cfg_tmp = (cfg_rcw5 >> 20) & 0x3;
|
||
for (i = 0; i < 2 && !(cfg_tmp & (0x1 << (1 - i))); i++) {
|
||
reg = in_be32(&serdes2_base->bank[i].rstctl);
|
||
reg |= 0x00000020;
|
||
out_be32(&serdes2_base->bank[i].rstctl, reg);
|
||
udelay(1);
|
||
|
||
reg = in_be32(&serdes2_base->bank[i].rstctl);
|
||
reg |= 0x00000080;
|
||
out_be32(&serdes2_base->bank[i].rstctl, reg);
|
||
|
||
/* Take the Rx/Tx calibration out of reset */
|
||
if (!(cfg_tmp == 0x3 && i == 1)) {
|
||
udelay(1);
|
||
reg = in_be32(&serdes2_base->srdstcalcr);
|
||
reg |= 0x08000000;
|
||
out_be32(&serdes2_base->srdstcalcr, reg);
|
||
reg = in_be32(&serdes2_base->srdsrcalcr);
|
||
reg |= 0x08000000;
|
||
out_be32(&serdes2_base->srdsrcalcr, reg);
|
||
}
|
||
}
|
||
udelay(1);
|
||
|
||
#endif
|
||
|
||
/* Wait for at lesat 625us to ensure the PLLs being reset are locked */
|
||
udelay(800);
|
||
|
||
#ifdef CONFIG_SYS_FSL_SRDS_1
|
||
cfg_tmp = (cfg_rcw5 >> 22) & 0x3;
|
||
for (i = 0; i < 2 && !(cfg_tmp & (0x1 << (1 - i))); i++) {
|
||
/* if the PLL is not locked, set RST_ERR */
|
||
reg = in_be32(&serdes1_base->bank[i].pllcr0);
|
||
if (!((reg >> 23) & 0x1)) {
|
||
reg = in_be32(&serdes1_base->bank[i].rstctl);
|
||
reg |= 0x20000000;
|
||
out_be32(&serdes1_base->bank[i].rstctl, reg);
|
||
} else {
|
||
udelay(1);
|
||
reg = in_be32(&serdes1_base->bank[i].rstctl);
|
||
reg &= 0xFFFFFFEF;
|
||
reg |= 0x00000040;
|
||
out_be32(&serdes1_base->bank[i].rstctl, reg);
|
||
udelay(1);
|
||
}
|
||
}
|
||
#endif
|
||
|
||
#ifdef CONFIG_SYS_FSL_SRDS_2
|
||
cfg_tmp = (cfg_rcw5 >> 20) & 0x3;
|
||
for (i = 0; i < 2 && !(cfg_tmp & (0x1 << (1 - i))); i++) {
|
||
reg = in_be32(&serdes2_base->bank[i].pllcr0);
|
||
if (!((reg >> 23) & 0x1)) {
|
||
reg = in_be32(&serdes2_base->bank[i].rstctl);
|
||
reg |= 0x20000000;
|
||
out_be32(&serdes2_base->bank[i].rstctl, reg);
|
||
} else {
|
||
udelay(1);
|
||
reg = in_be32(&serdes2_base->bank[i].rstctl);
|
||
reg &= 0xFFFFFFEF;
|
||
reg |= 0x00000040;
|
||
out_be32(&serdes2_base->bank[i].rstctl, reg);
|
||
udelay(1);
|
||
}
|
||
}
|
||
#endif
|
||
|
||
/* Take the all enabled lanes out of reset */
|
||
#ifdef CONFIG_SYS_FSL_SRDS_1
|
||
cfg_tmp = cfg_rcw4 & FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
|
||
cfg_tmp >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
|
||
|
||
for (i = 0; i < 4 && cfg_tmp & (0xf << (3 - i)); i++) {
|
||
reg = in_be32(&serdes1_base->lane[i].gcr0);
|
||
reg |= 0x00600000;
|
||
out_be32(&serdes1_base->lane[i].gcr0, reg);
|
||
}
|
||
#endif
|
||
#ifdef CONFIG_SYS_FSL_SRDS_2
|
||
cfg_tmp = cfg_rcw4 & FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_MASK;
|
||
cfg_tmp >>= FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_SHIFT;
|
||
|
||
for (i = 0; i < 4 && cfg_tmp & (0xf << (3 - i)); i++) {
|
||
reg = in_be32(&serdes2_base->lane[i].gcr0);
|
||
reg |= 0x00600000;
|
||
out_be32(&serdes2_base->lane[i].gcr0, reg);
|
||
}
|
||
#endif
|
||
/* For each PLL being reset, and achieved PLL lock set RST_DONE */
|
||
#ifdef CONFIG_SYS_FSL_SRDS_1
|
||
cfg_tmp = (cfg_rcw5 >> 22) & 0x3;
|
||
for (i = 0; i < 2; i++) {
|
||
reg = in_be32(&serdes1_base->bank[i].pllcr0);
|
||
if (!(cfg_tmp & (0x1 << (1 - i))) && ((reg >> 23) & 0x1)) {
|
||
reg = in_be32(&serdes1_base->bank[i].rstctl);
|
||
reg |= 0x40000000;
|
||
out_be32(&serdes1_base->bank[i].rstctl, reg);
|
||
}
|
||
}
|
||
#endif
|
||
#ifdef CONFIG_SYS_FSL_SRDS_2
|
||
cfg_tmp = (cfg_rcw5 >> 20) & 0x3;
|
||
for (i = 0; i < 2; i++) {
|
||
reg = in_be32(&serdes2_base->bank[i].pllcr0);
|
||
if (!(cfg_tmp & (0x1 << (1 - i))) && ((reg >> 23) & 0x1)) {
|
||
reg = in_be32(&serdes2_base->bank[i].rstctl);
|
||
reg |= 0x40000000;
|
||
out_be32(&serdes2_base->bank[i].rstctl, reg);
|
||
}
|
||
}
|
||
#endif
|
||
|
||
return ret;
|
||
}
|
||
|
||
void fsl_serdes_init(void)
|
||
{
|
||
#ifdef CONFIG_SYS_FSL_SRDS_1
|
||
serdes_init(FSL_SRDS_1,
|
||
CONFIG_SYS_FSL_SERDES_ADDR,
|
||
FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK,
|
||
FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT,
|
||
serdes1_prtcl_map);
|
||
#endif
|
||
#ifdef CONFIG_SYS_FSL_SRDS_2
|
||
serdes_init(FSL_SRDS_2,
|
||
CONFIG_SYS_FSL_SERDES_ADDR,
|
||
FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_MASK,
|
||
FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_SHIFT,
|
||
serdes2_prtcl_map);
|
||
#endif
|
||
}
|