mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 20:54:31 +00:00
4657a2d44e
In K2G, Ethernet doesn't support SGMII instead it support RGMII, adding support to the driver to connect to RGMII phy. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
260 lines
7.8 KiB
C
260 lines
7.8 KiB
C
/*
|
|
* emac definitions for keystone2 devices
|
|
*
|
|
* (C) Copyright 2012-2014
|
|
* Texas Instruments Incorporated, <www.ti.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef _KEYSTONE_NET_H_
|
|
#define _KEYSTONE_NET_H_
|
|
|
|
#include <asm/io.h>
|
|
#include <phy.h>
|
|
|
|
/* EMAC */
|
|
#ifdef CONFIG_KSNET_NETCP_V1_0
|
|
|
|
#define GBETH_BASE (CONFIG_KSNET_NETCP_BASE + 0x00090000)
|
|
#define EMAC_EMACSL_BASE_ADDR (GBETH_BASE + 0x900)
|
|
#define EMAC_MDIO_BASE_ADDR (GBETH_BASE + 0x300)
|
|
#define EMAC_SGMII_BASE_ADDR (GBETH_BASE + 0x100)
|
|
#define DEVICE_EMACSL_BASE(x) (EMAC_EMACSL_BASE_ADDR + (x) * 0x040)
|
|
|
|
/* Register offsets */
|
|
#define CPGMACSL_REG_CTL 0x04
|
|
#define CPGMACSL_REG_STATUS 0x08
|
|
#define CPGMACSL_REG_RESET 0x0c
|
|
#define CPGMACSL_REG_MAXLEN 0x10
|
|
|
|
#elif defined CONFIG_KSNET_NETCP_V1_5
|
|
|
|
#define GBETH_BASE (CONFIG_KSNET_NETCP_BASE + 0x00200000)
|
|
#define CPGMACSL_REG_RX_PRI_MAP 0x020
|
|
#define EMAC_EMACSL_BASE_ADDR (GBETH_BASE + 0x22000)
|
|
#define EMAC_MDIO_BASE_ADDR (GBETH_BASE + 0x00f00)
|
|
#define EMAC_SGMII_BASE_ADDR (GBETH_BASE + 0x00100)
|
|
#define DEVICE_EMACSL_BASE(x) (EMAC_EMACSL_BASE_ADDR + (x) * 0x1000)
|
|
|
|
/* Register offsets */
|
|
#define CPGMACSL_REG_CTL 0x330
|
|
#define CPGMACSL_REG_STATUS 0x334
|
|
#define CPGMACSL_REG_RESET 0x338
|
|
#define CPGMACSL_REG_MAXLEN 0x024
|
|
|
|
#endif
|
|
|
|
#define KEYSTONE2_EMAC_GIG_ENABLE
|
|
|
|
#define MAC_ID_BASE_ADDR CONFIG_KSNET_MAC_ID_BASE
|
|
|
|
/* MDIO module input frequency */
|
|
#ifdef CONFIG_SOC_K2G
|
|
#define EMAC_MDIO_BUS_FREQ (clk_get_rate(sys_clk0_3_clk))
|
|
#else
|
|
#define EMAC_MDIO_BUS_FREQ (clk_get_rate(pass_pll_clk))
|
|
#endif
|
|
/* MDIO clock output frequency */
|
|
#define EMAC_MDIO_CLOCK_FREQ 2500000 /* 2.5 MHz */
|
|
|
|
/* MII Status Register */
|
|
#define MII_STATUS_REG 1
|
|
#define MII_STATUS_LINK_MASK 0x4
|
|
|
|
#define MDIO_CONTROL_IDLE 0x80000000
|
|
#define MDIO_CONTROL_ENABLE 0x40000000
|
|
#define MDIO_CONTROL_FAULT_ENABLE 0x40000
|
|
#define MDIO_CONTROL_FAULT 0x80000
|
|
#define MDIO_USERACCESS0_GO 0x80000000
|
|
#define MDIO_USERACCESS0_WRITE_READ 0x0
|
|
#define MDIO_USERACCESS0_WRITE_WRITE 0x40000000
|
|
#define MDIO_USERACCESS0_ACK 0x20000000
|
|
|
|
#define EMAC_MACCONTROL_MIIEN_ENABLE 0x20
|
|
#define EMAC_MACCONTROL_FULLDUPLEX_ENABLE 0x1
|
|
#define EMAC_MACCONTROL_GIGABIT_ENABLE BIT(7)
|
|
#define EMAC_MACCONTROL_GIGFORCE BIT(17)
|
|
#define EMAC_MACCONTROL_RMIISPEED_100 BIT(15)
|
|
|
|
#define EMAC_MIN_ETHERNET_PKT_SIZE 60
|
|
|
|
struct mac_sl_cfg {
|
|
u_int32_t max_rx_len; /* Maximum receive packet length. */
|
|
u_int32_t ctl; /* Control bitfield */
|
|
};
|
|
|
|
/**
|
|
* Definition: Control bitfields used in the ctl field of mac_sl_cfg
|
|
*/
|
|
#define GMACSL_RX_ENABLE_RCV_CONTROL_FRAMES BIT(24)
|
|
#define GMACSL_RX_ENABLE_RCV_SHORT_FRAMES BIT(23)
|
|
#define GMACSL_RX_ENABLE_RCV_ERROR_FRAMES BIT(22)
|
|
#define GMACSL_RX_ENABLE_EXT_CTL BIT(18)
|
|
#define GMACSL_RX_ENABLE_GIG_FORCE BIT(17)
|
|
#define GMACSL_RX_ENABLE_IFCTL_B BIT(16)
|
|
#define GMACSL_RX_ENABLE_IFCTL_A BIT(15)
|
|
#define GMACSL_RX_ENABLE_CMD_IDLE BIT(11)
|
|
#define GMACSL_TX_ENABLE_SHORT_GAP BIT(10)
|
|
#define GMACSL_ENABLE_GIG_MODE BIT(7)
|
|
#define GMACSL_TX_ENABLE_PACE BIT(6)
|
|
#define GMACSL_ENABLE BIT(5)
|
|
#define GMACSL_TX_ENABLE_FLOW_CTL BIT(4)
|
|
#define GMACSL_RX_ENABLE_FLOW_CTL BIT(3)
|
|
#define GMACSL_ENABLE_LOOPBACK BIT(1)
|
|
#define GMACSL_ENABLE_FULL_DUPLEX BIT(0)
|
|
|
|
/* EMAC SL function return values */
|
|
#define GMACSL_RET_OK 0
|
|
#define GMACSL_RET_INVALID_PORT -1
|
|
#define GMACSL_RET_WARN_RESET_INCOMPLETE -2
|
|
#define GMACSL_RET_WARN_MAXLEN_TOO_BIG -3
|
|
#define GMACSL_RET_CONFIG_FAIL_RESET_ACTIVE -4
|
|
|
|
/* EMAC SL register definitions */
|
|
#define DEVICE_EMACSL_RESET_POLL_COUNT 100
|
|
|
|
/* Soft reset register values */
|
|
#define CPGMAC_REG_RESET_VAL_RESET_MASK BIT(0)
|
|
#define CPGMAC_REG_RESET_VAL_RESET BIT(0)
|
|
#define CPGMAC_REG_MAXLEN_LEN 0x3fff
|
|
|
|
/* CPSW */
|
|
/* Control bitfields */
|
|
#define CPSW_CTL_P2_PASS_PRI_TAGGED BIT(5)
|
|
#define CPSW_CTL_P1_PASS_PRI_TAGGED BIT(4)
|
|
#define CPSW_CTL_P0_PASS_PRI_TAGGED BIT(3)
|
|
#define CPSW_CTL_P0_ENABLE BIT(2)
|
|
#define CPSW_CTL_VLAN_AWARE BIT(1)
|
|
#define CPSW_CTL_FIFO_LOOPBACK BIT(0)
|
|
|
|
#define DEVICE_CPSW_NUM_PORTS CONFIG_KSNET_CPSW_NUM_PORTS
|
|
#define DEVICE_N_GMACSL_PORTS (DEVICE_CPSW_NUM_PORTS - 1)
|
|
|
|
#ifdef CONFIG_KSNET_NETCP_V1_0
|
|
|
|
#define DEVICE_CPSW_BASE (GBETH_BASE + 0x800)
|
|
#define CPSW_REG_CTL 0x004
|
|
#define CPSW_REG_STAT_PORT_EN 0x00c
|
|
#define CPSW_REG_MAXLEN 0x040
|
|
#define CPSW_REG_ALE_CONTROL 0x608
|
|
#define CPSW_REG_ALE_PORTCTL(x) (0x640 + (x) * 4)
|
|
#define CPSW_REG_VAL_STAT_ENABLE_ALL 0xf
|
|
|
|
#elif defined CONFIG_KSNET_NETCP_V1_5
|
|
|
|
#define DEVICE_CPSW_BASE (GBETH_BASE + 0x20000)
|
|
#define CPSW_REG_CTL 0x00004
|
|
#define CPSW_REG_STAT_PORT_EN 0x00014
|
|
#define CPSW_REG_MAXLEN 0x01024
|
|
#define CPSW_REG_ALE_CONTROL 0x1e008
|
|
#define CPSW_REG_ALE_PORTCTL(x) (0x1e040 + (x) * 4)
|
|
#define CPSW_REG_VAL_STAT_ENABLE_ALL 0x1ff
|
|
|
|
#endif
|
|
|
|
#define CPSW_REG_VAL_ALE_CTL_RESET_AND_ENABLE ((u_int32_t)0xc0000000)
|
|
#define CPSW_REG_VAL_ALE_CTL_BYPASS ((u_int32_t)0x00000010)
|
|
#define CPSW_REG_VAL_PORTCTL_FORWARD_MODE 0x3
|
|
|
|
#define target_get_switch_ctl() CPSW_CTL_P0_ENABLE
|
|
#define SWITCH_MAX_PKT_SIZE 9000
|
|
|
|
/* SGMII */
|
|
#define SGMII_REG_STATUS_LOCK BIT(4)
|
|
#define SGMII_REG_STATUS_LINK BIT(0)
|
|
#define SGMII_REG_STATUS_AUTONEG BIT(2)
|
|
#define SGMII_REG_CONTROL_AUTONEG BIT(0)
|
|
#define SGMII_REG_CONTROL_MASTER BIT(5)
|
|
#define SGMII_REG_MR_ADV_ENABLE BIT(0)
|
|
#define SGMII_REG_MR_ADV_LINK BIT(15)
|
|
#define SGMII_REG_MR_ADV_FULL_DUPLEX BIT(12)
|
|
#define SGMII_REG_MR_ADV_GIG_MODE BIT(11)
|
|
|
|
#define SGMII_LINK_MAC_MAC_AUTONEG 0
|
|
#define SGMII_LINK_MAC_PHY 1
|
|
#define SGMII_LINK_MAC_MAC_FORCED 2
|
|
#define SGMII_LINK_MAC_FIBER 3
|
|
#define SGMII_LINK_MAC_PHY_FORCED 4
|
|
|
|
#ifdef CONFIG_KSNET_NETCP_V1_0
|
|
#define SGMII_OFFSET(x) ((x <= 1) ? (x * 0x100) : ((x * 0x100) + 0x100))
|
|
#elif defined CONFIG_KSNET_NETCP_V1_5
|
|
#define SGMII_OFFSET(x) ((x) * 0x100)
|
|
#endif
|
|
|
|
#define SGMII_IDVER_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x000)
|
|
#define SGMII_SRESET_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x004)
|
|
#define SGMII_CTL_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x010)
|
|
#define SGMII_STATUS_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x014)
|
|
#define SGMII_MRADV_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x018)
|
|
#define SGMII_LPADV_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x020)
|
|
#define SGMII_TXCFG_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x030)
|
|
#define SGMII_RXCFG_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x034)
|
|
#define SGMII_AUXCFG_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x038)
|
|
|
|
/* RGMII */
|
|
#define RGMII_REG_STATUS_LINK BIT(0)
|
|
|
|
#define RGMII_STATUS_REG (GBETH_BASE + 0x18)
|
|
|
|
/* PSS */
|
|
#ifdef CONFIG_KSNET_NETCP_V1_0
|
|
|
|
#define DEVICE_PSTREAM_CFG_REG_ADDR (CONFIG_KSNET_NETCP_BASE + 0x604)
|
|
#define DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI 0x06060606
|
|
#define hw_config_streaming_switch()\
|
|
writel(DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI, DEVICE_PSTREAM_CFG_REG_ADDR);
|
|
|
|
#elif defined CONFIG_KSNET_NETCP_V1_5
|
|
|
|
#define DEVICE_PSTREAM_CFG_REG_ADDR (CONFIG_KSNET_NETCP_BASE + 0x500)
|
|
#define DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI 0x0
|
|
|
|
#define hw_config_streaming_switch()\
|
|
writel(DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI,\
|
|
DEVICE_PSTREAM_CFG_REG_ADDR);\
|
|
writel(DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI,\
|
|
DEVICE_PSTREAM_CFG_REG_ADDR+4);\
|
|
writel(DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI,\
|
|
DEVICE_PSTREAM_CFG_REG_ADDR+8);\
|
|
writel(DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI,\
|
|
DEVICE_PSTREAM_CFG_REG_ADDR+12);
|
|
|
|
#endif
|
|
|
|
/* EMAC MDIO Registers Structure */
|
|
struct mdio_regs {
|
|
u32 version;
|
|
u32 control;
|
|
u32 alive;
|
|
u32 link;
|
|
u32 linkintraw;
|
|
u32 linkintmasked;
|
|
u32 rsvd0[2];
|
|
u32 userintraw;
|
|
u32 userintmasked;
|
|
u32 userintmaskset;
|
|
u32 userintmaskclear;
|
|
u32 rsvd1[20];
|
|
u32 useraccess0;
|
|
u32 userphysel0;
|
|
u32 useraccess1;
|
|
u32 userphysel1;
|
|
};
|
|
|
|
struct eth_priv_t {
|
|
char int_name[32];
|
|
int rx_flow;
|
|
int phy_addr;
|
|
int slave_port;
|
|
int sgmii_link_type;
|
|
phy_interface_t phy_if;
|
|
struct phy_device *phy_dev;
|
|
};
|
|
|
|
int keystone2_emac_initialize(struct eth_priv_t *eth_priv);
|
|
void sgmii_serdes_setup_156p25mhz(void);
|
|
void sgmii_serdes_shutdown(void);
|
|
|
|
#endif /* _KEYSTONE_NET_H_ */
|