mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 16:39:35 +00:00
7b9e980e87
Use spl alternate boot device feature to define fallback to the main boot device as it is defined by hardware. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
260 lines
7.5 KiB
C
260 lines
7.5 KiB
C
/*
|
|
* Config file for Compulab CM-FX6 board
|
|
*
|
|
* Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
|
|
*
|
|
* Author: Nikita Kiryanov <nikita@compulab.co.il>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_CM_FX6_H
|
|
#define __CONFIG_CM_FX6_H
|
|
|
|
#include "mx6_common.h"
|
|
|
|
/* Machine config */
|
|
#define CONFIG_SYS_LITTLE_ENDIAN
|
|
#define CONFIG_MACH_TYPE 4273
|
|
|
|
/* CMD */
|
|
#define CONFIG_CMD_GREPENV
|
|
|
|
/* MMC */
|
|
#define CONFIG_SYS_FSL_USDHC_NUM 3
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
|
|
|
|
/* RAM */
|
|
#define PHYS_SDRAM_1 MMDC0_ARB_BASE_ADDR
|
|
#define PHYS_SDRAM_2 MMDC1_ARB_BASE_ADDR
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
|
#define CONFIG_NR_DRAM_BANKS 2
|
|
#define CONFIG_SYS_MEMTEST_START 0x10000000
|
|
#define CONFIG_SYS_MEMTEST_END 0x10010000
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
/* Serial console */
|
|
#define CONFIG_MXC_UART
|
|
#define CONFIG_MXC_UART_BASE UART4_BASE
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
|
|
|
|
/* Shell */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
|
sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
|
|
/* SPI flash */
|
|
#define CONFIG_SF_DEFAULT_BUS 0
|
|
#define CONFIG_SF_DEFAULT_CS 0
|
|
#define CONFIG_SF_DEFAULT_SPEED 25000000
|
|
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
|
|
|
|
/* Environment */
|
|
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
|
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
|
|
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
|
|
#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
|
|
#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
|
|
#define CONFIG_ENV_SECT_SIZE (64 * 1024)
|
|
#define CONFIG_ENV_SIZE (8 * 1024)
|
|
#define CONFIG_ENV_OFFSET (768 * 1024)
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"stdin=serial,usbkbd\0" \
|
|
"stdout=serial,vga\0" \
|
|
"stderr=serial,vga\0" \
|
|
"panel=HDMI\0" \
|
|
"autoload=no\0" \
|
|
"kernel=uImage-cm-fx6\0" \
|
|
"script=boot.scr\0" \
|
|
"dtb=cm-fx6.dtb\0" \
|
|
"bootm_low=18000000\0" \
|
|
"loadaddr=0x10800000\0" \
|
|
"fdtaddr=0x11000000\0" \
|
|
"console=ttymxc3,115200\0" \
|
|
"ethprime=FEC0\0" \
|
|
"video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
|
|
"video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
|
|
"doboot=bootm ${loadaddr}\0" \
|
|
"doloadfdt=false\0" \
|
|
"setboottypez=setenv kernel zImage-cm-fx6;" \
|
|
"setenv doboot bootz ${loadaddr} - ${fdtaddr};" \
|
|
"setenv doloadfdt true;\0" \
|
|
"setboottypem=setenv kernel uImage-cm-fx6;" \
|
|
"setenv doboot bootm ${loadaddr};" \
|
|
"setenv doloadfdt false;\0"\
|
|
"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
|
|
"sataroot=/dev/sda2 rw rootwait\0" \
|
|
"nandroot=/dev/mtdblock4 rw\0" \
|
|
"nandrootfstype=ubifs\0" \
|
|
"mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
|
|
"${video}\0" \
|
|
"sataargs=setenv bootargs console=${console} root=${sataroot} " \
|
|
"${video}\0" \
|
|
"nandargs=setenv bootargs console=${console} " \
|
|
"root=${nandroot} " \
|
|
"rootfstype=${nandrootfstype} " \
|
|
"${video}\0" \
|
|
"nandboot=if run nandloadkernel; then " \
|
|
"run nandloadfdt;" \
|
|
"run setboottypem;" \
|
|
"run storagebootcmd;" \
|
|
"run setboottypez;" \
|
|
"run storagebootcmd;" \
|
|
"fi;\0" \
|
|
"run_eboot=echo Starting EBOOT ...; "\
|
|
"mmc dev 2 && " \
|
|
"mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
|
|
"loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0"\
|
|
"loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0"\
|
|
"loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${dtb};\0" \
|
|
"bootscript=echo Running bootscript from ${storagetype} ...;" \
|
|
"source ${loadaddr};\0" \
|
|
"nandloadkernel=nand read ${loadaddr} 0 780000;\0" \
|
|
"nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \
|
|
"setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \
|
|
"setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \
|
|
"setupnandboot=setenv storagetype nand;\0" \
|
|
"setupusbboot=setenv storagetype usb; setenv storagedev 0;\0" \
|
|
"storagebootcmd=echo Booting from ${storagetype} ...;" \
|
|
"run ${storagetype}args; run doboot;\0" \
|
|
"trybootk=if run loadkernel; then " \
|
|
"if ${doloadfdt}; then " \
|
|
"run loadfdt;" \
|
|
"fi;" \
|
|
"run storagebootcmd;" \
|
|
"fi;\0" \
|
|
"trybootsmz=if run loadscript; then " \
|
|
"run bootscript;" \
|
|
"fi;" \
|
|
"run setboottypem;" \
|
|
"run trybootk;" \
|
|
"run setboottypez;" \
|
|
"run trybootk;\0"
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"run setupmmcboot;" \
|
|
"mmc dev ${storagedev};" \
|
|
"if mmc rescan; then " \
|
|
"run trybootsmz;" \
|
|
"fi;" \
|
|
"run setupusbboot;" \
|
|
"if usb start; then "\
|
|
"if run loadscript; then " \
|
|
"run bootscript;" \
|
|
"fi;" \
|
|
"fi;" \
|
|
"run setupsataboot;" \
|
|
"if sata init; then " \
|
|
"run trybootsmz;" \
|
|
"fi;" \
|
|
"run setupnandboot;" \
|
|
"run nandboot;"
|
|
|
|
#define CONFIG_PREBOOT "usb start"
|
|
|
|
/* SPI */
|
|
#define CONFIG_SPI
|
|
#define CONFIG_MXC_SPI
|
|
|
|
/* NAND */
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_SYS_NAND_BASE 0x40000000
|
|
#define CONFIG_SYS_NAND_MAX_CHIPS 1
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_NAND_MXS
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
/* APBH DMA is required for NAND support */
|
|
#define CONFIG_APBH_DMA
|
|
#define CONFIG_APBH_DMA_BURST
|
|
#define CONFIG_APBH_DMA_BURST8
|
|
#endif
|
|
|
|
/* Ethernet */
|
|
#define CONFIG_FEC_MXC
|
|
#define CONFIG_FEC_MXC_PHYADDR 0
|
|
#define CONFIG_FEC_XCV_TYPE RGMII
|
|
#define IMX_FEC_BASE ENET_BASE_ADDR
|
|
#define CONFIG_PHYLIB
|
|
#define CONFIG_PHY_ATHEROS
|
|
#define CONFIG_MII
|
|
#define CONFIG_ETHPRIME "FEC0"
|
|
#define CONFIG_ARP_TIMEOUT 200UL
|
|
#define CONFIG_NET_RETRY_COUNT 5
|
|
|
|
/* USB */
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#define CONFIG_MXC_USB_FLAGS 0
|
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
|
|
#define CONFIG_SYS_STDIO_DEREGISTER
|
|
|
|
/* I2C */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
#define CONFIG_SYS_MXC_I2C3_SPEED 400000
|
|
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
|
#define CONFIG_SYS_I2C_EEPROM_BUS 2
|
|
|
|
/* SATA */
|
|
#define CONFIG_CMD_SATA
|
|
#define CONFIG_SYS_SATA_MAX_DEVICE 1
|
|
#define CONFIG_LIBATA
|
|
#define CONFIG_LBA48
|
|
#define CONFIG_DWC_AHSATA
|
|
#define CONFIG_DWC_AHSATA_PORT_ID 0
|
|
#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
|
|
|
|
/* Boot */
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
|
|
#define CONFIG_SERIAL_TAG
|
|
|
|
/* misc */
|
|
#define CONFIG_STACKSIZE (128 * 1024)
|
|
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
|
|
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */
|
|
#define CONFIG_OF_BOARD_SETUP
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
/* SPL */
|
|
#include "imx6_spl.h"
|
|
#define CONFIG_SPL_MMC_SUPPORT
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80 /* offset 64 kb */
|
|
#define CONFIG_SYS_MONITOR_LEN (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS / 2 * 1024)
|
|
#define CONFIG_SPL_SPI_SUPPORT
|
|
#define CONFIG_SPL_SPI_FLASH_SUPPORT
|
|
#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
|
|
#define CONFIG_SPL_SPI_LOAD
|
|
|
|
/* Display */
|
|
#define CONFIG_VIDEO
|
|
#define CONFIG_VIDEO_IPUV3
|
|
#define CONFIG_IPUV3_CLK 260000000
|
|
#define CONFIG_IMX_HDMI
|
|
#define CONFIG_CFB_CONSOLE
|
|
#define CONFIG_VGA_AS_SINGLE_DEVICE
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
|
#define CONFIG_CONSOLE_MUX
|
|
#define CONFIG_VIDEO_SW_CURSOR
|
|
|
|
#define CONFIG_SPLASH_SCREEN
|
|
#define CONFIG_SPLASH_SOURCE
|
|
#define CONFIG_CMD_BMP
|
|
#define CONFIG_VIDEO_BMP_RLE8
|
|
|
|
#define CONFIG_VIDEO_LOGO
|
|
#define CONFIG_VIDEO_BMP_LOGO
|
|
|
|
#endif /* __CONFIG_CM_FX6_H */
|