mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 22:20:45 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
355 lines
7.9 KiB
C
355 lines
7.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2007,2009-2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <pci.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_pci.h>
|
|
#include <fsl_ddr_sdram.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <spd_sdram.h>
|
|
#include <i2c.h>
|
|
#include <ioports.h>
|
|
#include <linux/libfdt.h>
|
|
#include <fdt_support.h>
|
|
|
|
#include "bcsr.h"
|
|
|
|
const qe_iop_conf_t qe_iop_conf_tab[] = {
|
|
/* GETH1 */
|
|
{4, 10, 1, 0, 2}, /* TxD0 */
|
|
{4, 9, 1, 0, 2}, /* TxD1 */
|
|
{4, 8, 1, 0, 2}, /* TxD2 */
|
|
{4, 7, 1, 0, 2}, /* TxD3 */
|
|
{4, 23, 1, 0, 2}, /* TxD4 */
|
|
{4, 22, 1, 0, 2}, /* TxD5 */
|
|
{4, 21, 1, 0, 2}, /* TxD6 */
|
|
{4, 20, 1, 0, 2}, /* TxD7 */
|
|
{4, 15, 2, 0, 2}, /* RxD0 */
|
|
{4, 14, 2, 0, 2}, /* RxD1 */
|
|
{4, 13, 2, 0, 2}, /* RxD2 */
|
|
{4, 12, 2, 0, 2}, /* RxD3 */
|
|
{4, 29, 2, 0, 2}, /* RxD4 */
|
|
{4, 28, 2, 0, 2}, /* RxD5 */
|
|
{4, 27, 2, 0, 2}, /* RxD6 */
|
|
{4, 26, 2, 0, 2}, /* RxD7 */
|
|
{4, 11, 1, 0, 2}, /* TX_EN */
|
|
{4, 24, 1, 0, 2}, /* TX_ER */
|
|
{4, 16, 2, 0, 2}, /* RX_DV */
|
|
{4, 30, 2, 0, 2}, /* RX_ER */
|
|
{4, 17, 2, 0, 2}, /* RX_CLK */
|
|
{4, 19, 1, 0, 2}, /* GTX_CLK */
|
|
{1, 31, 2, 0, 3}, /* GTX125 */
|
|
|
|
/* GETH2 */
|
|
{5, 10, 1, 0, 2}, /* TxD0 */
|
|
{5, 9, 1, 0, 2}, /* TxD1 */
|
|
{5, 8, 1, 0, 2}, /* TxD2 */
|
|
{5, 7, 1, 0, 2}, /* TxD3 */
|
|
{5, 23, 1, 0, 2}, /* TxD4 */
|
|
{5, 22, 1, 0, 2}, /* TxD5 */
|
|
{5, 21, 1, 0, 2}, /* TxD6 */
|
|
{5, 20, 1, 0, 2}, /* TxD7 */
|
|
{5, 15, 2, 0, 2}, /* RxD0 */
|
|
{5, 14, 2, 0, 2}, /* RxD1 */
|
|
{5, 13, 2, 0, 2}, /* RxD2 */
|
|
{5, 12, 2, 0, 2}, /* RxD3 */
|
|
{5, 29, 2, 0, 2}, /* RxD4 */
|
|
{5, 28, 2, 0, 2}, /* RxD5 */
|
|
{5, 27, 2, 0, 3}, /* RxD6 */
|
|
{5, 26, 2, 0, 2}, /* RxD7 */
|
|
{5, 11, 1, 0, 2}, /* TX_EN */
|
|
{5, 24, 1, 0, 2}, /* TX_ER */
|
|
{5, 16, 2, 0, 2}, /* RX_DV */
|
|
{5, 30, 2, 0, 2}, /* RX_ER */
|
|
{5, 17, 2, 0, 2}, /* RX_CLK */
|
|
{5, 19, 1, 0, 2}, /* GTX_CLK */
|
|
{1, 31, 2, 0, 3}, /* GTX125 */
|
|
{4, 6, 3, 0, 2}, /* MDIO */
|
|
{4, 5, 1, 0, 2}, /* MDC */
|
|
|
|
/* UART1 */
|
|
{2, 0, 1, 0, 2}, /* UART_SOUT1 */
|
|
{2, 1, 1, 0, 2}, /* UART_RTS1 */
|
|
{2, 2, 2, 0, 2}, /* UART_CTS1 */
|
|
{2, 3, 2, 0, 2}, /* UART_SIN1 */
|
|
|
|
{0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */
|
|
};
|
|
|
|
void local_bus_init(void);
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
/*
|
|
* Initialize local bus.
|
|
*/
|
|
local_bus_init ();
|
|
|
|
enable_8568mds_duart();
|
|
enable_8568mds_flash_write();
|
|
#if defined(CONFIG_UEC_ETH1) || defined(CONFIG_UEC_ETH2)
|
|
reset_8568mds_uccs();
|
|
#endif
|
|
#if defined(CONFIG_QE) && !defined(CONFIG_eTSEC_MDIO_BUS)
|
|
enable_8568mds_qe_mdio();
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_I2C2_OFFSET
|
|
/* Enable I2C2_SCL and I2C2_SDA */
|
|
volatile struct par_io *port_c;
|
|
port_c = (struct par_io*)(CONFIG_SYS_IMMR + 0xe0140);
|
|
port_c->cpdir2 |= 0x0f000000;
|
|
port_c->cppar2 &= ~0x0f000000;
|
|
port_c->cppar2 |= 0x0a000000;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard (void)
|
|
{
|
|
printf ("Board: 8568 MDS\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Initialize Local Bus
|
|
*/
|
|
void
|
|
local_bus_init(void)
|
|
{
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
|
|
|
|
uint clkdiv;
|
|
sys_info_t sysinfo;
|
|
|
|
get_sys_info(&sysinfo);
|
|
clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
|
|
|
|
gur->lbiuiplldcr1 = 0x00078080;
|
|
if (clkdiv == 16) {
|
|
gur->lbiuiplldcr0 = 0x7c0f1bf0;
|
|
} else if (clkdiv == 8) {
|
|
gur->lbiuiplldcr0 = 0x6c0f1bf0;
|
|
} else if (clkdiv == 4) {
|
|
gur->lbiuiplldcr0 = 0x5c0f1bf0;
|
|
}
|
|
|
|
lbc->lcrr |= 0x00030000;
|
|
|
|
asm("sync;isync;msync");
|
|
}
|
|
|
|
/*
|
|
* Initialize SDRAM memory on the Local Bus.
|
|
*/
|
|
void lbc_sdram_init(void)
|
|
{
|
|
#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
|
|
|
|
uint idx;
|
|
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
|
|
uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
|
|
uint lsdmr_common;
|
|
|
|
puts("LBC SDRAM: ");
|
|
print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024,
|
|
"\n ");
|
|
|
|
/*
|
|
* Setup SDRAM Base and Option Registers
|
|
*/
|
|
set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
|
|
set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
|
|
asm("msync");
|
|
|
|
lbc->lbcr = CONFIG_SYS_LBC_LBCR;
|
|
asm("msync");
|
|
|
|
lbc->lsrt = CONFIG_SYS_LBC_LSRT;
|
|
lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
|
|
asm("msync");
|
|
|
|
/*
|
|
* MPC8568 uses "new" 15-16 style addressing.
|
|
*/
|
|
lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
|
|
lsdmr_common |= LSDMR_BSMA1516;
|
|
|
|
/*
|
|
* Issue PRECHARGE ALL command.
|
|
*/
|
|
lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL;
|
|
asm("sync;msync");
|
|
*sdram_addr = 0xff;
|
|
ppcDcbf((unsigned long) sdram_addr);
|
|
udelay(100);
|
|
|
|
/*
|
|
* Issue 8 AUTO REFRESH commands.
|
|
*/
|
|
for (idx = 0; idx < 8; idx++) {
|
|
lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH;
|
|
asm("sync;msync");
|
|
*sdram_addr = 0xff;
|
|
ppcDcbf((unsigned long) sdram_addr);
|
|
udelay(100);
|
|
}
|
|
|
|
/*
|
|
* Issue 8 MODE-set command.
|
|
*/
|
|
lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW;
|
|
asm("sync;msync");
|
|
*sdram_addr = 0xff;
|
|
ppcDcbf((unsigned long) sdram_addr);
|
|
udelay(100);
|
|
|
|
/*
|
|
* Issue NORMAL OP command.
|
|
*/
|
|
lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
|
|
asm("sync;msync");
|
|
*sdram_addr = 0xff;
|
|
ppcDcbf((unsigned long) sdram_addr);
|
|
udelay(200); /* Overkill. Must wait > 200 bus cycles */
|
|
|
|
#endif /* enable SDRAM init */
|
|
}
|
|
|
|
#if defined(CONFIG_PCI)
|
|
#ifndef CONFIG_PCI_PNP
|
|
static struct pci_config_table pci_mpc8568mds_config_table[] = {
|
|
{
|
|
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
|
|
pci_cfgfunc_config_device,
|
|
{PCI_ENET0_IOADDR,
|
|
PCI_ENET0_MEMADDR,
|
|
PCI_COMMON_MEMORY | PCI_COMMAND_MASTER}
|
|
},
|
|
{}
|
|
};
|
|
#endif
|
|
|
|
static struct pci_controller pci1_hose;
|
|
#endif /* CONFIG_PCI */
|
|
|
|
/*
|
|
* pib_init() -- Initialize the PCA9555 IO expander on the PIB board
|
|
*/
|
|
void
|
|
pib_init(void)
|
|
{
|
|
u8 val8, orig_i2c_bus;
|
|
/*
|
|
* Assign PIB PMC2/3 to PCI bus
|
|
*/
|
|
|
|
/*switch temporarily to I2C bus #2 */
|
|
orig_i2c_bus = i2c_get_bus_num();
|
|
i2c_set_bus_num(1);
|
|
|
|
val8 = 0x00;
|
|
i2c_write(0x23, 0x6, 1, &val8, 1);
|
|
i2c_write(0x23, 0x7, 1, &val8, 1);
|
|
val8 = 0xff;
|
|
i2c_write(0x23, 0x2, 1, &val8, 1);
|
|
i2c_write(0x23, 0x3, 1, &val8, 1);
|
|
|
|
val8 = 0x00;
|
|
i2c_write(0x26, 0x6, 1, &val8, 1);
|
|
val8 = 0x34;
|
|
i2c_write(0x26, 0x7, 1, &val8, 1);
|
|
val8 = 0xf9;
|
|
i2c_write(0x26, 0x2, 1, &val8, 1);
|
|
val8 = 0xff;
|
|
i2c_write(0x26, 0x3, 1, &val8, 1);
|
|
|
|
val8 = 0x00;
|
|
i2c_write(0x27, 0x6, 1, &val8, 1);
|
|
i2c_write(0x27, 0x7, 1, &val8, 1);
|
|
val8 = 0xff;
|
|
i2c_write(0x27, 0x2, 1, &val8, 1);
|
|
val8 = 0xef;
|
|
i2c_write(0x27, 0x3, 1, &val8, 1);
|
|
|
|
asm("eieio");
|
|
i2c_set_bus_num(orig_i2c_bus);
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
void pci_init_board(void)
|
|
{
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
int first_free_busno = 0;
|
|
#ifdef CONFIG_PCI1
|
|
struct fsl_pci_info pci_info;
|
|
u32 devdisr, pordevsr, io_sel;
|
|
u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
|
|
|
|
devdisr = in_be32(&gur->devdisr);
|
|
pordevsr = in_be32(&gur->pordevsr);
|
|
porpllsr = in_be32(&gur->porpllsr);
|
|
io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
|
|
|
|
debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
|
|
|
|
pci_speed = 66666000;
|
|
pci_32 = 1;
|
|
pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
|
|
pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
|
|
|
|
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
|
|
SET_STD_PCI_INFO(pci_info, 1);
|
|
set_next_law(pci_info.mem_phys,
|
|
law_size_bits(pci_info.mem_size), pci_info.law);
|
|
set_next_law(pci_info.io_phys,
|
|
law_size_bits(pci_info.io_size), pci_info.law);
|
|
|
|
pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs);
|
|
printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
|
|
(pci_32) ? 32 : 64,
|
|
(pci_speed == 33333000) ? "33" :
|
|
(pci_speed == 66666000) ? "66" : "unknown",
|
|
pci_clk_sel ? "sync" : "async",
|
|
pci_agent ? "agent" : "host",
|
|
pci_arb ? "arbiter" : "external-arbiter",
|
|
pci_info.regs);
|
|
|
|
#ifndef CONFIG_PCI_PNP
|
|
pci1_hose.config_table = pci_mpc8568mds_config_table;
|
|
#endif
|
|
first_free_busno = fsl_pci_init_port(&pci_info,
|
|
&pci1_hose, first_free_busno);
|
|
} else {
|
|
printf("PCI: disabled\n");
|
|
}
|
|
|
|
puts("\n");
|
|
#else
|
|
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
|
|
#endif
|
|
|
|
fsl_pcie_init_board(first_free_busno);
|
|
}
|
|
#endif /* CONFIG_PCI */
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
FT_FSL_PCI_SETUP;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|