u-boot/cpu/mpc8xxx/ddr/ddr.h
Kumar Gala e7563aff17 fsl-ddr: Fix handling of >4G of memory when !CONFIG_PHYS_64BIT
The ddr code computes most things as 64-bit quantities and had some places
in the middle that it was using phy_addr_t and phys_size_t.

Instead we use unsigned long long through out and only at the last stage of
setting the LAWs and reporting the amount of memory to the board code do we
truncate down to what we can cover via phys_size_t.

This has the added benefit that the DDR controller itself is always setup
the same way regardless of how much memory we have.  Its only the LAW
setup that limits what is visible to the system.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-12 09:15:50 -05:00

81 lines
2.6 KiB
C

/*
* Copyright 2008 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* Version 2 as published by the Free Software Foundation.
*/
#ifndef FSL_DDR_MAIN_H
#define FSL_DDR_MAIN_H
#include <asm/fsl_ddr_sdram.h>
#include <asm/fsl_ddr_dimm_params.h>
#include "common_timing_params.h"
/*
* Bind the main DDR setup driver's generic names
* to this specific DDR technology.
*/
static __inline__ int
compute_dimm_parameters(const generic_spd_eeprom_t *spd,
dimm_params_t *pdimm,
unsigned int dimm_number)
{
return ddr_compute_dimm_parameters(spd, pdimm, dimm_number);
}
/*
* Data Structures
*
* All data structures have to be on the stack
*/
#define CONFIG_SYS_NUM_DDR_CTLRS CONFIG_NUM_DDR_CONTROLLERS
#define CONFIG_SYS_DIMM_SLOTS_PER_CTLR CONFIG_DIMM_SLOTS_PER_CTLR
typedef struct {
generic_spd_eeprom_t
spd_installed_dimms[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_SYS_DIMM_SLOTS_PER_CTLR];
struct dimm_params_s
dimm_params[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_SYS_DIMM_SLOTS_PER_CTLR];
memctl_options_t memctl_opts[CONFIG_SYS_NUM_DDR_CTLRS];
common_timing_params_t common_timing_params[CONFIG_SYS_NUM_DDR_CTLRS];
fsl_ddr_cfg_regs_t fsl_ddr_config_reg[CONFIG_SYS_NUM_DDR_CTLRS];
} fsl_ddr_info_t;
/* Compute steps */
#define STEP_GET_SPD (1 << 0)
#define STEP_COMPUTE_DIMM_PARMS (1 << 1)
#define STEP_COMPUTE_COMMON_PARMS (1 << 2)
#define STEP_GATHER_OPTS (1 << 3)
#define STEP_ASSIGN_ADDRESSES (1 << 4)
#define STEP_COMPUTE_REGS (1 << 5)
#define STEP_PROGRAM_REGS (1 << 6)
#define STEP_ALL 0xFFF
extern unsigned long long
fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step);
extern const char * step_to_string(unsigned int step);
extern unsigned int
compute_fsl_memctl_config_regs(const memctl_options_t *popts,
fsl_ddr_cfg_regs_t *ddr,
const common_timing_params_t *common_dimm,
const dimm_params_t *dimm_parameters,
unsigned int dbw_capacity_adjust);
extern unsigned int
compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
common_timing_params_t *outpdimm,
unsigned int number_of_dimms);
extern unsigned int populate_memctl_options(int all_DIMMs_registered,
memctl_options_t *popts,
dimm_params_t *pdimm,
unsigned int ctrl_num);
extern unsigned int mclk_to_picos(unsigned int mclk);
extern unsigned int get_memory_clk_period_ps(void);
extern unsigned int picos_to_mclk(unsigned int picos);
#endif