mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 23:51:33 +00:00
333e4a621d
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
466 lines
10 KiB
C
466 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Generic DWC3 Glue layer
|
|
*
|
|
* Copyright (C) 2016 - 2018 Xilinx, Inc.
|
|
*
|
|
* Based on dwc3-omap.c.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <cpu_func.h>
|
|
#include <log.h>
|
|
#include <dm.h>
|
|
#include <dm/device-internal.h>
|
|
#include <dm/lists.h>
|
|
#include <dwc3-uboot.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <malloc.h>
|
|
#include <usb.h>
|
|
#include "core.h"
|
|
#include "gadget.h"
|
|
#include <reset.h>
|
|
#include <clk.h>
|
|
#include <usb/xhci.h>
|
|
|
|
struct dwc3_glue_data {
|
|
struct clk_bulk clks;
|
|
struct reset_ctl_bulk resets;
|
|
fdt_addr_t regs;
|
|
};
|
|
|
|
struct dwc3_generic_plat {
|
|
fdt_addr_t base;
|
|
u32 maximum_speed;
|
|
enum usb_dr_mode dr_mode;
|
|
};
|
|
|
|
struct dwc3_generic_priv {
|
|
void *base;
|
|
struct dwc3 dwc3;
|
|
struct phy_bulk phys;
|
|
};
|
|
|
|
struct dwc3_generic_host_priv {
|
|
struct xhci_ctrl xhci_ctrl;
|
|
struct dwc3_generic_priv gen_priv;
|
|
};
|
|
|
|
static int dwc3_generic_probe(struct udevice *dev,
|
|
struct dwc3_generic_priv *priv)
|
|
{
|
|
int rc;
|
|
struct dwc3_generic_plat *plat = dev_get_plat(dev);
|
|
struct dwc3 *dwc3 = &priv->dwc3;
|
|
struct dwc3_glue_data *glue = dev_get_plat(dev->parent);
|
|
|
|
dwc3->dev = dev;
|
|
dwc3->maximum_speed = plat->maximum_speed;
|
|
dwc3->dr_mode = plat->dr_mode;
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL)
|
|
dwc3_of_parse(dwc3);
|
|
#endif
|
|
|
|
/*
|
|
* It must hold whole USB3.0 OTG controller in resetting to hold pipe
|
|
* power state in P2 before initializing TypeC PHY on RK3399 platform.
|
|
*/
|
|
if (device_is_compatible(dev->parent, "rockchip,rk3399-dwc3")) {
|
|
reset_assert_bulk(&glue->resets);
|
|
udelay(1);
|
|
}
|
|
|
|
rc = dwc3_setup_phy(dev, &priv->phys);
|
|
if (rc && rc != -ENOTSUPP)
|
|
return rc;
|
|
|
|
if (device_is_compatible(dev->parent, "rockchip,rk3399-dwc3"))
|
|
reset_deassert_bulk(&glue->resets);
|
|
|
|
priv->base = map_physmem(plat->base, DWC3_OTG_REGS_END, MAP_NOCACHE);
|
|
dwc3->regs = priv->base + DWC3_GLOBALS_REGS_START;
|
|
|
|
|
|
rc = dwc3_init(dwc3);
|
|
if (rc) {
|
|
unmap_physmem(priv->base, MAP_NOCACHE);
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwc3_generic_remove(struct udevice *dev,
|
|
struct dwc3_generic_priv *priv)
|
|
{
|
|
struct dwc3 *dwc3 = &priv->dwc3;
|
|
|
|
dwc3_remove(dwc3);
|
|
dwc3_shutdown_phy(dev, &priv->phys);
|
|
unmap_physmem(dwc3->regs, MAP_NOCACHE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwc3_generic_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct dwc3_generic_plat *plat = dev_get_plat(dev);
|
|
ofnode node = dev_ofnode(dev);
|
|
|
|
plat->base = dev_read_addr(dev);
|
|
|
|
plat->maximum_speed = usb_get_maximum_speed(node);
|
|
if (plat->maximum_speed == USB_SPEED_UNKNOWN) {
|
|
pr_info("No USB maximum speed specified. Using super speed\n");
|
|
plat->maximum_speed = USB_SPEED_SUPER;
|
|
}
|
|
|
|
plat->dr_mode = usb_get_dr_mode(node);
|
|
if (plat->dr_mode == USB_DR_MODE_UNKNOWN) {
|
|
pr_err("Invalid usb mode setup\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(DM_USB_GADGET)
|
|
int dm_usb_gadget_handle_interrupts(struct udevice *dev)
|
|
{
|
|
struct dwc3_generic_priv *priv = dev_get_priv(dev);
|
|
struct dwc3 *dwc3 = &priv->dwc3;
|
|
|
|
dwc3_gadget_uboot_handle_interrupt(dwc3);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwc3_generic_peripheral_probe(struct udevice *dev)
|
|
{
|
|
struct dwc3_generic_priv *priv = dev_get_priv(dev);
|
|
|
|
return dwc3_generic_probe(dev, priv);
|
|
}
|
|
|
|
static int dwc3_generic_peripheral_remove(struct udevice *dev)
|
|
{
|
|
struct dwc3_generic_priv *priv = dev_get_priv(dev);
|
|
|
|
return dwc3_generic_remove(dev, priv);
|
|
}
|
|
|
|
U_BOOT_DRIVER(dwc3_generic_peripheral) = {
|
|
.name = "dwc3-generic-peripheral",
|
|
.id = UCLASS_USB_GADGET_GENERIC,
|
|
.of_to_plat = dwc3_generic_of_to_plat,
|
|
.probe = dwc3_generic_peripheral_probe,
|
|
.remove = dwc3_generic_peripheral_remove,
|
|
.priv_auto = sizeof(struct dwc3_generic_priv),
|
|
.plat_auto = sizeof(struct dwc3_generic_plat),
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPL_USB_HOST) || \
|
|
!defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_HOST)
|
|
static int dwc3_generic_host_probe(struct udevice *dev)
|
|
{
|
|
struct xhci_hcor *hcor;
|
|
struct xhci_hccr *hccr;
|
|
struct dwc3_generic_host_priv *priv = dev_get_priv(dev);
|
|
int rc;
|
|
|
|
rc = dwc3_generic_probe(dev, &priv->gen_priv);
|
|
if (rc)
|
|
return rc;
|
|
|
|
hccr = (struct xhci_hccr *)priv->gen_priv.base;
|
|
hcor = (struct xhci_hcor *)(priv->gen_priv.base +
|
|
HC_LENGTH(xhci_readl(&(hccr)->cr_capbase)));
|
|
|
|
return xhci_register(dev, hccr, hcor);
|
|
}
|
|
|
|
static int dwc3_generic_host_remove(struct udevice *dev)
|
|
{
|
|
struct dwc3_generic_host_priv *priv = dev_get_priv(dev);
|
|
int rc;
|
|
|
|
rc = xhci_deregister(dev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
return dwc3_generic_remove(dev, &priv->gen_priv);
|
|
}
|
|
|
|
U_BOOT_DRIVER(dwc3_generic_host) = {
|
|
.name = "dwc3-generic-host",
|
|
.id = UCLASS_USB,
|
|
.of_to_plat = dwc3_generic_of_to_plat,
|
|
.probe = dwc3_generic_host_probe,
|
|
.remove = dwc3_generic_host_remove,
|
|
.priv_auto = sizeof(struct dwc3_generic_host_priv),
|
|
.plat_auto = sizeof(struct dwc3_generic_plat),
|
|
.ops = &xhci_usb_ops,
|
|
.flags = DM_FLAG_ALLOC_PRIV_DMA,
|
|
};
|
|
#endif
|
|
|
|
struct dwc3_glue_ops {
|
|
void (*select_dr_mode)(struct udevice *dev, int index,
|
|
enum usb_dr_mode mode);
|
|
};
|
|
|
|
void dwc3_ti_select_dr_mode(struct udevice *dev, int index,
|
|
enum usb_dr_mode mode)
|
|
{
|
|
#define USBOTGSS_UTMI_OTG_STATUS 0x0084
|
|
#define USBOTGSS_UTMI_OTG_OFFSET 0x0480
|
|
|
|
/* UTMI_OTG_STATUS REGISTER */
|
|
#define USBOTGSS_UTMI_OTG_STATUS_SW_MODE BIT(31)
|
|
#define USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT BIT(9)
|
|
#define USBOTGSS_UTMI_OTG_STATUS_TXBITSTUFFENABLE BIT(8)
|
|
#define USBOTGSS_UTMI_OTG_STATUS_IDDIG BIT(4)
|
|
#define USBOTGSS_UTMI_OTG_STATUS_SESSEND BIT(3)
|
|
#define USBOTGSS_UTMI_OTG_STATUS_SESSVALID BIT(2)
|
|
#define USBOTGSS_UTMI_OTG_STATUS_VBUSVALID BIT(1)
|
|
enum dwc3_omap_utmi_mode {
|
|
DWC3_OMAP_UTMI_MODE_UNKNOWN = 0,
|
|
DWC3_OMAP_UTMI_MODE_HW,
|
|
DWC3_OMAP_UTMI_MODE_SW,
|
|
};
|
|
|
|
u32 use_id_pin;
|
|
u32 host_mode;
|
|
u32 reg;
|
|
u32 utmi_mode;
|
|
u32 utmi_status_offset = USBOTGSS_UTMI_OTG_STATUS;
|
|
|
|
struct dwc3_glue_data *glue = dev_get_plat(dev);
|
|
void *base = map_physmem(glue->regs, 0x10000, MAP_NOCACHE);
|
|
|
|
if (device_is_compatible(dev, "ti,am437x-dwc3"))
|
|
utmi_status_offset += USBOTGSS_UTMI_OTG_OFFSET;
|
|
|
|
utmi_mode = dev_read_u32_default(dev, "utmi-mode",
|
|
DWC3_OMAP_UTMI_MODE_UNKNOWN);
|
|
if (utmi_mode != DWC3_OMAP_UTMI_MODE_HW) {
|
|
debug("%s: OTG is not supported. defaulting to PERIPHERAL\n",
|
|
dev->name);
|
|
mode = USB_DR_MODE_PERIPHERAL;
|
|
}
|
|
|
|
switch (mode) {
|
|
case USB_DR_MODE_PERIPHERAL:
|
|
use_id_pin = 0;
|
|
host_mode = 0;
|
|
break;
|
|
case USB_DR_MODE_HOST:
|
|
use_id_pin = 0;
|
|
host_mode = 1;
|
|
break;
|
|
case USB_DR_MODE_OTG:
|
|
default:
|
|
use_id_pin = 1;
|
|
host_mode = 0;
|
|
break;
|
|
}
|
|
|
|
reg = readl(base + utmi_status_offset);
|
|
|
|
reg &= ~(USBOTGSS_UTMI_OTG_STATUS_SW_MODE);
|
|
if (!use_id_pin)
|
|
reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
|
|
|
|
writel(reg, base + utmi_status_offset);
|
|
|
|
reg &= ~(USBOTGSS_UTMI_OTG_STATUS_SESSEND |
|
|
USBOTGSS_UTMI_OTG_STATUS_VBUSVALID |
|
|
USBOTGSS_UTMI_OTG_STATUS_IDDIG);
|
|
|
|
reg |= USBOTGSS_UTMI_OTG_STATUS_SESSVALID |
|
|
USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT;
|
|
|
|
if (!host_mode)
|
|
reg |= USBOTGSS_UTMI_OTG_STATUS_IDDIG |
|
|
USBOTGSS_UTMI_OTG_STATUS_VBUSVALID;
|
|
|
|
writel(reg, base + utmi_status_offset);
|
|
|
|
unmap_physmem(base, MAP_NOCACHE);
|
|
}
|
|
|
|
struct dwc3_glue_ops ti_ops = {
|
|
.select_dr_mode = dwc3_ti_select_dr_mode,
|
|
};
|
|
|
|
static int dwc3_glue_bind(struct udevice *parent)
|
|
{
|
|
ofnode node;
|
|
int ret;
|
|
|
|
ofnode_for_each_subnode(node, dev_ofnode(parent)) {
|
|
const char *name = ofnode_get_name(node);
|
|
enum usb_dr_mode dr_mode;
|
|
struct udevice *dev;
|
|
const char *driver = NULL;
|
|
|
|
debug("%s: subnode name: %s\n", __func__, name);
|
|
|
|
dr_mode = usb_get_dr_mode(node);
|
|
|
|
switch (dr_mode) {
|
|
case USB_DR_MODE_PERIPHERAL:
|
|
case USB_DR_MODE_OTG:
|
|
#if CONFIG_IS_ENABLED(DM_USB_GADGET)
|
|
debug("%s: dr_mode: OTG or Peripheral\n", __func__);
|
|
driver = "dwc3-generic-peripheral";
|
|
#endif
|
|
break;
|
|
#if defined(CONFIG_SPL_USB_HOST) || !defined(CONFIG_SPL_BUILD)
|
|
case USB_DR_MODE_HOST:
|
|
debug("%s: dr_mode: HOST\n", __func__);
|
|
driver = "dwc3-generic-host";
|
|
break;
|
|
#endif
|
|
default:
|
|
debug("%s: unsupported dr_mode\n", __func__);
|
|
return -ENODEV;
|
|
};
|
|
|
|
if (!driver)
|
|
continue;
|
|
|
|
ret = device_bind_driver_to_node(parent, driver, name,
|
|
node, &dev);
|
|
if (ret) {
|
|
debug("%s: not able to bind usb device mode\n",
|
|
__func__);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwc3_glue_reset_init(struct udevice *dev,
|
|
struct dwc3_glue_data *glue)
|
|
{
|
|
int ret;
|
|
|
|
ret = reset_get_bulk(dev, &glue->resets);
|
|
if (ret == -ENOTSUPP || ret == -ENOENT)
|
|
return 0;
|
|
else if (ret)
|
|
return ret;
|
|
|
|
ret = reset_deassert_bulk(&glue->resets);
|
|
if (ret) {
|
|
reset_release_bulk(&glue->resets);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwc3_glue_clk_init(struct udevice *dev,
|
|
struct dwc3_glue_data *glue)
|
|
{
|
|
int ret;
|
|
|
|
ret = clk_get_bulk(dev, &glue->clks);
|
|
if (ret == -ENOSYS || ret == -ENOENT)
|
|
return 0;
|
|
if (ret)
|
|
return ret;
|
|
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
ret = clk_enable_bulk(&glue->clks);
|
|
if (ret) {
|
|
clk_release_bulk(&glue->clks);
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwc3_glue_probe(struct udevice *dev)
|
|
{
|
|
struct dwc3_glue_ops *ops = (struct dwc3_glue_ops *)dev_get_driver_data(dev);
|
|
struct dwc3_glue_data *glue = dev_get_plat(dev);
|
|
struct udevice *child = NULL;
|
|
int index = 0;
|
|
int ret;
|
|
|
|
glue->regs = dev_read_addr(dev);
|
|
|
|
ret = dwc3_glue_clk_init(dev, glue);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = dwc3_glue_reset_init(dev, glue);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = device_find_first_child(dev, &child);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (glue->resets.count == 0) {
|
|
ret = dwc3_glue_reset_init(child, glue);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
while (child) {
|
|
enum usb_dr_mode dr_mode;
|
|
|
|
dr_mode = usb_get_dr_mode(dev_ofnode(child));
|
|
device_find_next_child(&child);
|
|
if (ops && ops->select_dr_mode)
|
|
ops->select_dr_mode(dev, index, dr_mode);
|
|
index++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwc3_glue_remove(struct udevice *dev)
|
|
{
|
|
struct dwc3_glue_data *glue = dev_get_plat(dev);
|
|
|
|
reset_release_bulk(&glue->resets);
|
|
|
|
clk_release_bulk(&glue->clks);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id dwc3_glue_ids[] = {
|
|
{ .compatible = "xlnx,zynqmp-dwc3" },
|
|
{ .compatible = "xlnx,versal-dwc3" },
|
|
{ .compatible = "ti,keystone-dwc3"},
|
|
{ .compatible = "ti,dwc3", .data = (ulong)&ti_ops },
|
|
{ .compatible = "ti,am437x-dwc3", .data = (ulong)&ti_ops },
|
|
{ .compatible = "ti,am654-dwc3" },
|
|
{ .compatible = "rockchip,rk3328-dwc3" },
|
|
{ .compatible = "rockchip,rk3399-dwc3" },
|
|
{ .compatible = "qcom,dwc3" },
|
|
{ .compatible = "intel,tangier-dwc3" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(dwc3_generic_wrapper) = {
|
|
.name = "dwc3-generic-wrapper",
|
|
.id = UCLASS_NOP,
|
|
.of_match = dwc3_glue_ids,
|
|
.bind = dwc3_glue_bind,
|
|
.probe = dwc3_glue_probe,
|
|
.remove = dwc3_glue_remove,
|
|
.plat_auto = sizeof(struct dwc3_glue_data),
|
|
|
|
};
|