u-boot/arch/x86/cpu/ivybridge/sata.c
Simon Glass 401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00

259 lines
7 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* From Coreboot
* Copyright (C) 2008-2009 coresystems GmbH
*/
#include <common.h>
#include <ahci.h>
#include <dm.h>
#include <fdtdec.h>
#include <log.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/pch_common.h>
#include <asm/pci.h>
#include <asm/arch/pch.h>
DECLARE_GLOBAL_DATA_PTR;
static void common_sata_init(struct udevice *dev, unsigned int port_map)
{
u32 reg32;
u16 reg16;
/* Set IDE I/O Configuration */
reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
dm_pci_write_config32(dev, IDE_CONFIG, reg32);
/* Port enable */
dm_pci_read_config16(dev, 0x92, &reg16);
reg16 &= ~0x3f;
reg16 |= port_map;
dm_pci_write_config16(dev, 0x92, reg16);
/* SATA Initialization register */
port_map &= 0xff;
dm_pci_write_config32(dev, 0x94, ((port_map ^ 0x3f) << 24) | 0x183);
}
static void bd82x6x_sata_init(struct udevice *dev, struct udevice *pch)
{
unsigned int port_map, speed_support, port_tx;
const void *blob = gd->fdt_blob;
int node = dev_of_offset(dev);
const char *mode;
u32 reg32;
u16 reg16;
debug("SATA: Initializing...\n");
/* SATA configuration */
port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
speed_support = fdtdec_get_int(blob, node,
"sata_interface_speed_support", 0);
mode = fdt_getprop(blob, node, "intel,sata-mode", NULL);
if (!mode || !strcmp(mode, "ahci")) {
ulong abar;
debug("SATA: Controller in AHCI mode\n");
/* Set timings */
dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
IDE_PPE0 | IDE_IE0 | IDE_TIME0);
dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
/* Sync DMA */
dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0);
dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0001);
common_sata_init(dev, 0x8000 | port_map);
/* Initialize AHCI memory-mapped space */
abar = dm_pci_read_bar32(dev, 5);
debug("ABAR: %08lx\n", abar);
/* CAP (HBA Capabilities) : enable power management */
reg32 = readl(abar + 0x00);
reg32 |= 0x0c006000; /* set PSC+SSC+SALP+SSS */
reg32 &= ~0x00020060; /* clear SXS+EMS+PMS */
/* Set ISS, if available */
if (speed_support) {
reg32 &= ~0x00f00000;
reg32 |= (speed_support & 0x03) << 20;
}
writel(reg32, abar + 0x00);
/* PI (Ports implemented) */
writel(port_map, abar + 0x0c);
(void) readl(abar + 0x0c); /* Read back 1 */
(void) readl(abar + 0x0c); /* Read back 2 */
/* CAP2 (HBA Capabilities Extended)*/
reg32 = readl(abar + 0x24);
reg32 &= ~0x00000002;
writel(reg32, abar + 0x24);
/* VSP (Vendor Specific Register */
reg32 = readl(abar + 0xa0);
reg32 &= ~0x00000005;
writel(reg32, abar + 0xa0);
} else if (!strcmp(mode, "combined")) {
debug("SATA: Controller in combined mode\n");
/* No AHCI: clear AHCI base */
dm_pci_write_bar32(dev, 5, 0x00000000);
/* And without AHCI BAR no memory decoding */
dm_pci_read_config16(dev, PCI_COMMAND, &reg16);
reg16 &= ~PCI_COMMAND_MEMORY;
dm_pci_write_config16(dev, PCI_COMMAND, reg16);
dm_pci_write_config8(dev, 0x09, 0x80);
/* Set timings */
dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
IDE_PPE0 | IDE_IE0 | IDE_TIME0);
/* Sync DMA */
dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0);
dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0200);
common_sata_init(dev, port_map);
} else {
debug("SATA: Controller in plain-ide mode\n");
/* No AHCI: clear AHCI base */
dm_pci_write_bar32(dev, 5, 0x00000000);
/* And without AHCI BAR no memory decoding */
dm_pci_read_config16(dev, PCI_COMMAND, &reg16);
reg16 &= ~PCI_COMMAND_MEMORY;
dm_pci_write_config16(dev, PCI_COMMAND, reg16);
/*
* Native mode capable on both primary and secondary (0xa)
* OR'ed with enabled (0x50) = 0xf
*/
dm_pci_write_config8(dev, 0x09, 0x8f);
/* Set timings */
dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
IDE_PPE0 | IDE_IE0 | IDE_TIME0);
dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
IDE_SITRE | IDE_ISP_3_CLOCKS |
IDE_RCT_1_CLOCKS | IDE_IE0 | IDE_TIME0);
/* Sync DMA */
dm_pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0 | IDE_PSDE0);
dm_pci_write_config16(dev, IDE_SDMA_TIM, 0x0201);
common_sata_init(dev, port_map);
}
/* Set Gen3 Transmitter settings if needed */
port_tx = fdtdec_get_int(blob, node, "intel,sata-port0-gen3-tx", 0);
if (port_tx)
pch_iobp_update(pch, SATA_IOBP_SP0G3IR, 0, port_tx);
port_tx = fdtdec_get_int(blob, node, "intel,sata-port1-gen3-tx", 0);
if (port_tx)
pch_iobp_update(pch, SATA_IOBP_SP1G3IR, 0, port_tx);
/* Additional Programming Requirements */
pch_common_sir_write(dev, 0x04, 0x00001600);
pch_common_sir_write(dev, 0x28, 0xa0000033);
reg32 = pch_common_sir_read(dev, 0x54);
reg32 &= 0xff000000;
reg32 |= 0x5555aa;
pch_common_sir_write(dev, 0x54, reg32);
pch_common_sir_write(dev, 0x64, 0xcccc8484);
reg32 = pch_common_sir_read(dev, 0x68);
reg32 &= 0xffff0000;
reg32 |= 0xcccc;
pch_common_sir_write(dev, 0x68, reg32);
reg32 = pch_common_sir_read(dev, 0x78);
reg32 &= 0x0000ffff;
reg32 |= 0x88880000;
pch_common_sir_write(dev, 0x78, reg32);
pch_common_sir_write(dev, 0x84, 0x001c7000);
pch_common_sir_write(dev, 0x88, 0x88338822);
pch_common_sir_write(dev, 0xa0, 0x001c7000);
pch_common_sir_write(dev, 0xc4, 0x0c0c0c0c);
pch_common_sir_write(dev, 0xc8, 0x0c0c0c0c);
pch_common_sir_write(dev, 0xd4, 0x10000000);
pch_iobp_update(pch, 0xea004001, 0x3fffffff, 0xc0000000);
pch_iobp_update(pch, 0xea00408a, 0xfffffcff, 0x00000100);
}
static void bd82x6x_sata_enable(struct udevice *dev)
{
const void *blob = gd->fdt_blob;
int node = dev_of_offset(dev);
unsigned port_map;
const char *mode;
u16 map = 0;
/*
* Set SATA controller mode early so the resource allocator can
* properly assign IO/Memory resources for the controller.
*/
mode = fdt_getprop(blob, node, "intel,sata-mode", NULL);
if (mode && !strcmp(mode, "ahci"))
map = 0x0060;
port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
map |= (port_map ^ 0x3f) << 8;
dm_pci_write_config16(dev, 0x90, map);
}
static int bd82x6x_sata_bind(struct udevice *dev)
{
struct udevice *scsi_dev;
int ret;
if (gd->flags & GD_FLG_RELOC) {
ret = ahci_bind_scsi(dev, &scsi_dev);
if (ret)
return ret;
}
return 0;
}
static int bd82x6x_sata_probe(struct udevice *dev)
{
struct udevice *pch;
int ret;
ret = uclass_first_device_err(UCLASS_PCH, &pch);
if (ret)
return ret;
if (!(gd->flags & GD_FLG_RELOC))
bd82x6x_sata_enable(dev);
else {
bd82x6x_sata_init(dev, pch);
ret = ahci_probe_scsi_pci(dev);
if (ret)
return ret;
}
return 0;
}
static const struct udevice_id bd82x6x_ahci_ids[] = {
{ .compatible = "intel,pantherpoint-ahci" },
{ }
};
U_BOOT_DRIVER(ahci_ivybridge_drv) = {
.name = "ahci_ivybridge",
.id = UCLASS_AHCI,
.of_match = bd82x6x_ahci_ids,
.bind = bd82x6x_sata_bind,
.probe = bd82x6x_sata_probe,
};