u-boot/board/freescale/p1_twr/ddr.c
Simon Glass 2189d5f1e8 Move strtomhz() to vsprintf.h
At present this function sits in its own file but it does not really
justify it. There are similar string functions in vsprintf.h, so move it
there. Also add the missing function comment.

Use the vsprintf.h include file explicitly where needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:23:09 -05:00

69 lines
2.1 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <vsprintf.h>
#include <asm/mmu.h>
#include <asm/immap_85xx.h>
#include <asm/processor.h>
#include <fsl_ddr_sdram.h>
#include <fsl_ddr_dimm_params.h>
#include <asm/io.h>
#include <asm/fsl_law.h>
/* Fixed sdram init -- doesn't use serial presence detect. */
phys_size_t fixed_sdram(void)
{
sys_info_t sysinfo;
char buf[32];
size_t ddr_size;
fsl_ddr_cfg_regs_t ddr_cfg_regs = {
.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
#if CONFIG_CHIP_SELECTS_PER_CTRL > 1
.cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
.cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
.cs[1].config_2 = CONFIG_SYS_DDR_CS1_CONFIG_2,
#endif
.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3,
.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0,
.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1,
.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2,
.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1,
.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2,
.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL,
.ddr_data_init = CONFIG_SYS_DDR_DATA_INIT,
.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL,
.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL,
.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
};
get_sys_info(&sysinfo);
printf("Configuring DDR for %s MT/s data rate\n",
strmhz(buf, sysinfo.freq_ddrbus));
ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0);
if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
ddr_size, LAW_TRGT_IF_DDR_1) < 0) {
printf("ERROR setting Local Access Windows for DDR\n");
return 0;
};
return ddr_size;
}