u-boot/arch/arm/mach-stm32mp/spl.c
Harald Seiler c51b751893 spl: mmc: Rename spl_boot_partition() to spl_mmc_boot_partition()
This function is only relevant to the MMC driver so calling it
spl_boot_partition() might be confusing.  Rename it to
spl_mmc_boot_partition() to make its purpose more clear (and bring
it in line with spl_mmc_boot_mode()).

Signed-off-by: Harald Seiler <hws@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-22 20:41:57 +08:00

118 lines
2.3 KiB
C

// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
*/
#include <common.h>
#include <dm.h>
#include <hang.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#include <linux/libfdt.h>
u32 spl_boot_device(void)
{
u32 boot_mode;
boot_mode = get_bootmode();
switch (boot_mode) {
case BOOT_FLASH_SD_1:
case BOOT_FLASH_EMMC_1:
return BOOT_DEVICE_MMC1;
case BOOT_FLASH_SD_2:
case BOOT_FLASH_EMMC_2:
return BOOT_DEVICE_MMC2;
case BOOT_SERIAL_UART_1:
case BOOT_SERIAL_UART_2:
case BOOT_SERIAL_UART_3:
case BOOT_SERIAL_UART_4:
case BOOT_SERIAL_UART_5:
case BOOT_SERIAL_UART_6:
case BOOT_SERIAL_UART_7:
case BOOT_SERIAL_UART_8:
return BOOT_DEVICE_UART;
case BOOT_SERIAL_USB_OTG:
return BOOT_DEVICE_USB;
case BOOT_FLASH_NAND_FMC:
return BOOT_DEVICE_NAND;
case BOOT_FLASH_NOR_QSPI:
return BOOT_DEVICE_SPI;
}
return BOOT_DEVICE_MMC1;
}
u32 spl_mmc_boot_mode(const u32 boot_device)
{
return MMCSD_MODE_RAW;
}
int spl_mmc_boot_partition(const u32 boot_device)
{
switch (boot_device) {
case BOOT_DEVICE_MMC1:
return CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION;
case BOOT_DEVICE_MMC2:
return CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2;
default:
return -EINVAL;
}
}
#ifdef CONFIG_SPL_DISPLAY_PRINT
void spl_display_print(void)
{
DECLARE_GLOBAL_DATA_PTR;
const char *model;
/* same code than show_board_info() but not compiled for SPL
* see CONFIG_DISPLAY_BOARDINFO & common/board_info.c
*/
model = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
if (model)
printf("Model: %s\n", model);
}
#endif
void board_init_f(ulong dummy)
{
struct udevice *dev;
int ret;
arch_cpu_init();
ret = spl_early_init();
if (ret) {
debug("spl_early_init() failed: %d\n", ret);
hang();
}
ret = uclass_get_device(UCLASS_CLK, 0, &dev);
if (ret) {
debug("Clock init failed: %d\n", ret);
return;
}
ret = uclass_get_device(UCLASS_RESET, 0, &dev);
if (ret) {
debug("Reset init failed: %d\n", ret);
return;
}
ret = uclass_get_device(UCLASS_PINCTRL, 0, &dev);
if (ret) {
debug("%s: Cannot find pinctrl device\n", __func__);
return;
}
/* enable console uart printing */
preloader_console_init();
ret = uclass_get_device(UCLASS_RAM, 0, &dev);
if (ret) {
printf("DRAM init failed: %d\n", ret);
hang();
}
}