mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 22:03:15 +00:00
e8d5291824
Commit286ede6("drivers: core: Add translation in live tree case") made dev_get_addr always use proper bus translations for addresses read from the device tree. But this leads to problems with certain busses, e.g. I2C busses, which run into an error during translation, and hence stop working. It turns out that of_translate_address() and fdt_translate_address() stop the address translation with an error when they're asked to translate addresses for busses where #size-cells == 0 (comment from drivers/core/of_addr.c): * Note: We consider that crossing any level with #size-cells == 0 to mean * that translation is impossible (that is we are not dealing with a value * that can be mapped to a cpu physical address). This is not really specified * that way, but this is traditionally the way IBM at least do things To fix this case, we check in both the live-tree and non-live tree-case, whether the bus of the device whose address is about to be translated has size-cell size zero. If this is the case, we just read the address as a plain integer and return it, and only apply bus translations if the size-cell size if greater than zero. Signed-off-by: Mario Six <mario.six@gdsys.cc> Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com> Reported-by: Martin Fuzzey <mfuzzey@parkeon.com> Fixes:286ede6("drivers: core: Add translation in live tree case") Reviewed-by: Simon Glass <sjg@chromium.org>
540 lines
9.4 KiB
Text
540 lines
9.4 KiB
Text
/dts-v1/;
|
|
|
|
/ {
|
|
model = "sandbox";
|
|
compatible = "sandbox";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
console = &uart0;
|
|
eth0 = "/eth@10002000";
|
|
eth3 = ð_3;
|
|
eth5 = ð_5;
|
|
i2c0 = "/i2c@0";
|
|
mmc0 = "/mmc0";
|
|
mmc1 = "/mmc1";
|
|
pci0 = &pci;
|
|
remoteproc1 = &rproc_1;
|
|
remoteproc2 = &rproc_2;
|
|
rtc0 = &rtc_0;
|
|
rtc1 = &rtc_1;
|
|
spi0 = "/spi@0";
|
|
testfdt6 = "/e-test";
|
|
testbus3 = "/some-bus";
|
|
testfdt0 = "/some-bus/c-test@0";
|
|
testfdt1 = "/some-bus/c-test@1";
|
|
testfdt3 = "/b-test";
|
|
testfdt5 = "/some-bus/c-test@5";
|
|
testfdt8 = "/a-test";
|
|
fdt_dummy0 = "/translation-test@8000/dev@0,0";
|
|
fdt_dummy1 = "/translation-test@8000/dev@1,100";
|
|
fdt_dummy2 = "/translation-test@8000/dev@2,200";
|
|
fdt_dummy3 = "/translation-test@8000/noxlatebus@3,300/dev@42";
|
|
usb0 = &usb_0;
|
|
usb1 = &usb_1;
|
|
usb2 = &usb_2;
|
|
};
|
|
|
|
a-test {
|
|
reg = <0 1>;
|
|
compatible = "denx,u-boot-fdt-test";
|
|
ping-expect = <0>;
|
|
ping-add = <0>;
|
|
u-boot,dm-pre-reloc;
|
|
test-gpios = <&gpio_a 1>, <&gpio_a 4>, <&gpio_b 5 0 3 2 1>,
|
|
<0>, <&gpio_a 12>;
|
|
test2-gpios = <&gpio_a 1>, <&gpio_a 4>, <&gpio_b 6 1 3 2 1>,
|
|
<&gpio_b 7 2 3 2 1>, <&gpio_b 8 4 3 2 1>,
|
|
<&gpio_b 9 0xc 3 2 1>;
|
|
};
|
|
|
|
junk {
|
|
reg = <1 1>;
|
|
compatible = "not,compatible";
|
|
};
|
|
|
|
no-compatible {
|
|
reg = <2 1>;
|
|
};
|
|
|
|
b-test {
|
|
reg = <3 1>;
|
|
compatible = "denx,u-boot-fdt-test";
|
|
ping-expect = <3>;
|
|
ping-add = <3>;
|
|
};
|
|
|
|
phy_provider0: gen_phy@0 {
|
|
compatible = "sandbox,phy";
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
phy_provider1: gen_phy@1 {
|
|
compatible = "sandbox,phy";
|
|
#phy-cells = <0>;
|
|
broken;
|
|
};
|
|
|
|
gen_phy_user: gen_phy_user {
|
|
compatible = "simple-bus";
|
|
phys = <&phy_provider0 0>, <&phy_provider0 1>, <&phy_provider1>;
|
|
phy-names = "phy1", "phy2", "phy3";
|
|
};
|
|
|
|
some-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "denx,u-boot-test-bus";
|
|
reg = <3 1>;
|
|
ping-expect = <4>;
|
|
ping-add = <4>;
|
|
c-test@5 {
|
|
compatible = "denx,u-boot-fdt-test";
|
|
reg = <5>;
|
|
ping-expect = <5>;
|
|
ping-add = <5>;
|
|
};
|
|
c-test@0 {
|
|
compatible = "denx,u-boot-fdt-test";
|
|
reg = <0>;
|
|
ping-expect = <6>;
|
|
ping-add = <6>;
|
|
};
|
|
c-test@1 {
|
|
compatible = "denx,u-boot-fdt-test";
|
|
reg = <1>;
|
|
ping-expect = <7>;
|
|
ping-add = <7>;
|
|
};
|
|
};
|
|
|
|
d-test {
|
|
reg = <3 1>;
|
|
ping-expect = <6>;
|
|
ping-add = <6>;
|
|
compatible = "google,another-fdt-test";
|
|
};
|
|
|
|
e-test {
|
|
reg = <3 1>;
|
|
ping-expect = <6>;
|
|
ping-add = <6>;
|
|
compatible = "google,another-fdt-test";
|
|
};
|
|
|
|
f-test {
|
|
compatible = "denx,u-boot-fdt-test";
|
|
};
|
|
|
|
g-test {
|
|
compatible = "denx,u-boot-fdt-test";
|
|
};
|
|
|
|
clocks {
|
|
clk_fixed: clk-fixed {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <1234>;
|
|
};
|
|
};
|
|
|
|
clk_sandbox: clk-sbox {
|
|
compatible = "sandbox,clk";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
clk-test {
|
|
compatible = "sandbox,clk-test";
|
|
clocks = <&clk_fixed>,
|
|
<&clk_sandbox 1>,
|
|
<&clk_sandbox 0>;
|
|
clock-names = "fixed", "i2c", "spi";
|
|
};
|
|
|
|
eth@10002000 {
|
|
compatible = "sandbox,eth";
|
|
reg = <0x10002000 0x1000>;
|
|
fake-host-hwaddr = <0x00 0x00 0x66 0x44 0x22 0x00>;
|
|
};
|
|
|
|
eth_5: eth@10003000 {
|
|
compatible = "sandbox,eth";
|
|
reg = <0x10003000 0x1000>;
|
|
fake-host-hwaddr = <0x00 0x00 0x66 0x44 0x22 0x11>;
|
|
};
|
|
|
|
eth_3: sbe5 {
|
|
compatible = "sandbox,eth";
|
|
reg = <0x10005000 0x1000>;
|
|
fake-host-hwaddr = <0x00 0x00 0x66 0x44 0x22 0x33>;
|
|
};
|
|
|
|
eth@10004000 {
|
|
compatible = "sandbox,eth";
|
|
reg = <0x10004000 0x1000>;
|
|
fake-host-hwaddr = <0x00 0x00 0x66 0x44 0x22 0x22>;
|
|
};
|
|
|
|
gpio_a: base-gpios {
|
|
compatible = "sandbox,gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <1>;
|
|
gpio-bank-name = "a";
|
|
sandbox,gpio-count = <20>;
|
|
};
|
|
|
|
gpio_b: extra-gpios {
|
|
compatible = "sandbox,gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <5>;
|
|
gpio-bank-name = "b";
|
|
sandbox,gpio-count = <10>;
|
|
};
|
|
|
|
i2c@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0 1>;
|
|
compatible = "sandbox,i2c";
|
|
clock-frequency = <100000>;
|
|
eeprom@2c {
|
|
reg = <0x2c>;
|
|
compatible = "i2c-eeprom";
|
|
emul {
|
|
compatible = "sandbox,i2c-eeprom";
|
|
sandbox,filename = "i2c.bin";
|
|
sandbox,size = <256>;
|
|
};
|
|
};
|
|
|
|
rtc_0: rtc@43 {
|
|
reg = <0x43>;
|
|
compatible = "sandbox-rtc";
|
|
emul {
|
|
compatible = "sandbox,i2c-rtc";
|
|
};
|
|
};
|
|
|
|
rtc_1: rtc@61 {
|
|
reg = <0x61>;
|
|
compatible = "sandbox-rtc";
|
|
emul {
|
|
compatible = "sandbox,i2c-rtc";
|
|
};
|
|
};
|
|
|
|
sandbox_pmic: sandbox_pmic {
|
|
reg = <0x40>;
|
|
};
|
|
};
|
|
|
|
adc@0 {
|
|
compatible = "sandbox,adc";
|
|
vdd-supply = <&buck2>;
|
|
vss-microvolts = <0>;
|
|
};
|
|
|
|
lcd {
|
|
u-boot,dm-pre-reloc;
|
|
compatible = "sandbox,lcd-sdl";
|
|
xres = <1366>;
|
|
yres = <768>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
iracibble {
|
|
gpios = <&gpio_a 1 0>;
|
|
label = "sandbox:red";
|
|
};
|
|
|
|
martinet {
|
|
gpios = <&gpio_a 2 0>;
|
|
label = "sandbox:green";
|
|
};
|
|
};
|
|
|
|
mbox: mbox {
|
|
compatible = "sandbox,mbox";
|
|
#mbox-cells = <1>;
|
|
};
|
|
|
|
mbox-test {
|
|
compatible = "sandbox,mbox-test";
|
|
mboxes = <&mbox 100>, <&mbox 1>;
|
|
mbox-names = "other", "test";
|
|
};
|
|
|
|
mmc2 {
|
|
compatible = "sandbox,mmc";
|
|
};
|
|
|
|
mmc1 {
|
|
compatible = "sandbox,mmc";
|
|
};
|
|
|
|
mmc0 {
|
|
compatible = "sandbox,mmc";
|
|
};
|
|
|
|
pci: pci-controller {
|
|
compatible = "sandbox,pci";
|
|
device_type = "pci";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges = <0x02000000 0 0x10000000 0x10000000 0 0x2000
|
|
0x01000000 0 0x20000000 0x20000000 0 0x2000>;
|
|
pci@1f,0 {
|
|
compatible = "pci-generic";
|
|
reg = <0xf800 0 0 0 0>;
|
|
emul@1f,0 {
|
|
compatible = "sandbox,swap-case";
|
|
};
|
|
};
|
|
};
|
|
|
|
probing {
|
|
compatible = "simple-bus";
|
|
test1 {
|
|
compatible = "denx,u-boot-probe-test";
|
|
};
|
|
|
|
test2 {
|
|
compatible = "denx,u-boot-probe-test";
|
|
};
|
|
|
|
test3 {
|
|
compatible = "denx,u-boot-probe-test";
|
|
};
|
|
|
|
test4 {
|
|
compatible = "denx,u-boot-probe-test";
|
|
};
|
|
};
|
|
|
|
pwrdom: power-domain {
|
|
compatible = "sandbox,power-domain";
|
|
#power-domain-cells = <1>;
|
|
};
|
|
|
|
power-domain-test {
|
|
compatible = "sandbox,power-domain-test";
|
|
power-domains = <&pwrdom 2>;
|
|
};
|
|
|
|
pwm {
|
|
compatible = "sandbox,pwm";
|
|
};
|
|
|
|
pwm2 {
|
|
compatible = "sandbox,pwm";
|
|
};
|
|
|
|
ram {
|
|
compatible = "sandbox,ram";
|
|
};
|
|
|
|
reset@0 {
|
|
compatible = "sandbox,warm-reset";
|
|
};
|
|
|
|
reset@1 {
|
|
compatible = "sandbox,reset";
|
|
};
|
|
|
|
resetc: reset-ctl {
|
|
compatible = "sandbox,reset-ctl";
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
reset-ctl-test {
|
|
compatible = "sandbox,reset-ctl-test";
|
|
resets = <&resetc 100>, <&resetc 2>;
|
|
reset-names = "other", "test";
|
|
};
|
|
|
|
rproc_1: rproc@1 {
|
|
compatible = "sandbox,test-processor";
|
|
remoteproc-name = "remoteproc-test-dev1";
|
|
};
|
|
|
|
rproc_2: rproc@2 {
|
|
compatible = "sandbox,test-processor";
|
|
internal-memory-mapped;
|
|
remoteproc-name = "remoteproc-test-dev2";
|
|
};
|
|
|
|
spi@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0 1>;
|
|
compatible = "sandbox,spi";
|
|
cs-gpios = <0>, <&gpio_a 0>;
|
|
spi.bin@0 {
|
|
reg = <0>;
|
|
compatible = "spansion,m25p16", "spi-flash";
|
|
spi-max-frequency = <40000000>;
|
|
sandbox,filename = "spi.bin";
|
|
};
|
|
};
|
|
|
|
syscon@0 {
|
|
compatible = "sandbox,syscon0";
|
|
reg = <0x10 4>;
|
|
};
|
|
|
|
syscon@1 {
|
|
compatible = "sandbox,syscon1";
|
|
reg = <0x20 5
|
|
0x28 6
|
|
0x30 7
|
|
0x38 8>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "sandbox,timer";
|
|
clock-frequency = <1000000>;
|
|
};
|
|
|
|
uart0: serial {
|
|
compatible = "sandbox,serial";
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
usb_0: usb@0 {
|
|
compatible = "sandbox,usb";
|
|
status = "disabled";
|
|
hub {
|
|
compatible = "sandbox,usb-hub";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
flash-stick {
|
|
reg = <0>;
|
|
compatible = "sandbox,usb-flash";
|
|
};
|
|
};
|
|
};
|
|
|
|
usb_1: usb@1 {
|
|
compatible = "sandbox,usb";
|
|
hub {
|
|
compatible = "usb-hub";
|
|
usb,device-class = <9>;
|
|
hub-emul {
|
|
compatible = "sandbox,usb-hub";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
flash-stick@0 {
|
|
reg = <0>;
|
|
compatible = "sandbox,usb-flash";
|
|
sandbox,filepath = "testflash.bin";
|
|
};
|
|
|
|
flash-stick@1 {
|
|
reg = <1>;
|
|
compatible = "sandbox,usb-flash";
|
|
sandbox,filepath = "testflash1.bin";
|
|
};
|
|
|
|
flash-stick@2 {
|
|
reg = <2>;
|
|
compatible = "sandbox,usb-flash";
|
|
sandbox,filepath = "testflash2.bin";
|
|
};
|
|
|
|
keyb@3 {
|
|
reg = <3>;
|
|
compatible = "sandbox,usb-keyb";
|
|
};
|
|
|
|
};
|
|
};
|
|
};
|
|
|
|
usb_2: usb@2 {
|
|
compatible = "sandbox,usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
spmi: spmi@0 {
|
|
compatible = "sandbox,spmi";
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x1>;
|
|
pm8916@0 {
|
|
compatible = "qcom,spmi-pmic";
|
|
reg = <0x0 0x1>;
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x1>;
|
|
|
|
spmi_gpios: gpios@c000 {
|
|
compatible = "qcom,pm8916-gpio";
|
|
reg = <0xc000 0x400>;
|
|
gpio-controller;
|
|
gpio-count = <4>;
|
|
#gpio-cells = <2>;
|
|
gpio-bank-name="spmi";
|
|
};
|
|
};
|
|
};
|
|
|
|
wdt0: wdt@0 {
|
|
compatible = "sandbox,wdt";
|
|
};
|
|
|
|
chosen {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
chosen-test {
|
|
compatible = "denx,u-boot-fdt-test";
|
|
reg = <9 1>;
|
|
};
|
|
};
|
|
|
|
translation-test@8000 {
|
|
compatible = "simple-bus";
|
|
reg = <0x8000 0x4000>;
|
|
|
|
#address-cells = <0x2>;
|
|
#size-cells = <0x1>;
|
|
|
|
ranges = <0 0x0 0x8000 0x1000
|
|
1 0x100 0x9000 0x1000
|
|
2 0x200 0xA000 0x1000
|
|
3 0x300 0xB000 0x1000
|
|
>;
|
|
|
|
dev@0,0 {
|
|
compatible = "denx,u-boot-fdt-dummy";
|
|
reg = <0 0x0 0x1000>;
|
|
};
|
|
|
|
dev@1,100 {
|
|
compatible = "denx,u-boot-fdt-dummy";
|
|
reg = <1 0x100 0x1000>;
|
|
|
|
};
|
|
|
|
dev@2,200 {
|
|
compatible = "denx,u-boot-fdt-dummy";
|
|
reg = <2 0x200 0x1000>;
|
|
};
|
|
|
|
|
|
noxlatebus@3,300 {
|
|
compatible = "simple-bus";
|
|
reg = <3 0x300 0x1000>;
|
|
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x0>;
|
|
|
|
dev@42 {
|
|
compatible = "denx,u-boot-fdt-dummy";
|
|
reg = <0x42>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
#include "sandbox_pmic.dtsi"
|