mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 03:23:47 +00:00
305 lines
14 KiB
C
305 lines
14 KiB
C
/**************** DEFINES for Intel 28F008S5 FLASH chip **********************/
|
|
|
|
/* register addresses, valid only following a I8S5_CMD_RD_ID command */
|
|
#define I8S5_ADDR_MAN 0x00000 /* manufacturer's id */
|
|
#define I8S5_ADDR_DEV 0x00001 /* device id */
|
|
#define I8S5_ADDR_CFGM 0x00003 /* master lock configuration */
|
|
#define I8S5_ADDR_CFG(b) (((b)<<16)|2) /* block lock configuration */
|
|
|
|
/* Commands */
|
|
#define I8S5_CMD_RST 0xFF /* reset flash */
|
|
#define I8S5_CMD_RD_ID 0x90 /* read the id and lock bits */
|
|
#define I8S5_CMD_RD_STAT 0x70 /* read the status register */
|
|
#define I8S5_CMD_CLR_STAT 0x50 /* clear the staus register */
|
|
#define I8S5_CMD_ERASE1 0x20 /* first word for block erase */
|
|
#define I8S5_CMD_ERASE2 0xD0 /* second word for block erase */
|
|
#define I8S5_CMD_PROG 0x40 /* program word command */
|
|
#define I8S5_CMD_LOCK 0x60 /* first word for all lock commands */
|
|
#define I8S5_CMD_SET_LOCK_BLK 0x01 /* 2nd word for set block lock bit */
|
|
#define I8S5_CMD_SET_LOCK_MSTR 0xF1 /* 2nd word for set master lock bit */
|
|
#define I8S5_CMD_CLR_LOCK_BLK 0xD0 /* 2nd word for clear block lock bit */
|
|
|
|
/* status register bits */
|
|
#define I8S5_STAT_DPS 0x02 /* Device Protect Status */
|
|
#define I8S5_STAT_PSS 0x04 /* Program Suspend Status */
|
|
#define I8S5_STAT_VPPS 0x08 /* VPP Status */
|
|
#define I8S5_STAT_PSLBS 0x10 /* Program and Set Lock Bit Status */
|
|
#define I8S5_STAT_ECLBS 0x20 /* Erase and Clear Lock Bit Status */
|
|
#define I8S5_STAT_ESS 0x40 /* Erase Suspend Status */
|
|
#define I8S5_STAT_RDY 0x80 /* Write State Machine Status, 1=rdy */
|
|
|
|
#define I8S5_STAT_ERR (I8S5_STAT_VPPS | I8S5_STAT_DPS | \
|
|
I8S5_STAT_ECLBS | I8S5_STAT_PSLBS)
|
|
|
|
/* ID and Lock Configuration */
|
|
#define I8S5_RD_ID_LOCK 0x01 /* Bit 0 of each byte */
|
|
#define I8S5_RD_ID_MAN 0x89 /* Manufacturer code = 0x89 */
|
|
#define I8S5_RD_ID_DEV 0xA6 /* Device code = 0xA6, 28F008S5 */
|
|
|
|
/* dimensions */
|
|
#define I8S5_NBLOCKS 16 /* a 28F008S5 consists of 16 blocks */
|
|
#define I8S5_BLKSZ (64*1024) /* of 64Kbyte each */
|
|
#define I8S5_SIZE (I8S5_BLKSZ * I8S5_NBLOCKS)
|
|
|
|
/**************** DEFINES for Intel 28F800B5 FLASH chip **********************/
|
|
|
|
/* register addresses, valid only following a I8S5_CMD_RD_ID command */
|
|
#define I8B5_ADDR_MAN 0x00000 /* manufacturer's id */
|
|
#define I8B5_ADDR_DEV 0x00001 /* device id */
|
|
|
|
/* Commands */
|
|
#define I8B5_CMD_RST 0xFF /* reset flash */
|
|
#define I8B5_CMD_RD_ID 0x90 /* read the id and lock bits */
|
|
#define I8B5_CMD_RD_STAT 0x70 /* read the status register */
|
|
#define I8B5_CMD_CLR_STAT 0x50 /* clear the staus register */
|
|
#define I8B5_CMD_ERASE1 0x20 /* first word for block erase */
|
|
#define I8B5_CMD_ERASE2 0xD0 /* second word for block erase */
|
|
#define I8B5_CMD_PROG 0x40 /* program word command */
|
|
|
|
/* status register bits */
|
|
#define I8B5_STAT_VPPS 0x08 /* VPP Status */
|
|
#define I8B5_STAT_DWS 0x10 /* Program and Set Lock Bit Status */
|
|
#define I8B5_STAT_ES 0x20 /* Erase and Clear Lock Bit Status */
|
|
#define I8B5_STAT_ESS 0x40 /* Erase Suspend Status */
|
|
#define I8B5_STAT_RDY 0x80 /* Write State Machine Status, 1=rdy */
|
|
|
|
#define I8B5_STAT_ERR (I8B5_STAT_VPPS | I8B5_STAT_DWS | I8B5_STAT_ES)
|
|
|
|
/* ID Configuration */
|
|
#define I8B5_RD_ID_MAN 0x89 /* Manufacturer code = 0x89 */
|
|
#define I8B5_RD_ID_DEV1 0x889D /* Device code = 0x889D, 28F800B5 */
|
|
|
|
/* dimensions */
|
|
#define I8B5_NBLOCKS 8 /* a 28F008S5 consists of 16 blocks */
|
|
#define I8B5_BLKSZ (128*1024) /* of 64Kbyte each */
|
|
#define I8B5_SIZE (I8B5_BLKSZ * I8B5_NBLOCKS)
|
|
|
|
/****************** DEFINES for Cogent CMA302 Flash **************************/
|
|
|
|
/*
|
|
* Quoted from the CMA302 manual:
|
|
*
|
|
* Although the CMA302 supports 64-bit reads, all writes must be done with
|
|
* word size only. When programming the CMA302, the FLASH devices appear as 2
|
|
* banks of interleaved, 32-bit wide FLASH. Each 32-bit word consists of four
|
|
* 28F008S5 devices. The first bank is accessed when the word address is even,
|
|
* while the second bank is accessed when the word address is odd. This must
|
|
* be taken into account when programming the desired word. Also, when locking
|
|
* blocks, software must lock both banks. The CMA302 does not directly support
|
|
* byte writing. Programming and/or erasing individual bytes is done with
|
|
* selective use of the Write Command. By not placing the Write Command value
|
|
* on a particular byte lane, that byte will not be written with the following
|
|
* Write Data. Also, remember that within a byte lane (i.e. D0-7), there are
|
|
* two 28F008S5 devices, one for each bank or every other word.
|
|
*
|
|
* End quote.
|
|
*
|
|
* Each 28F008S5 is 8Mbit, with 8 bit wide data. i.e. each is 1Mbyte. The
|
|
* chips are arranged on the CMA302 in multiples of two banks, each bank having
|
|
* 4 chips. Each bank must be accessed as a single 32 bit wide device (i.e.
|
|
* aligned on a 32 bit boundary), with each byte lane within the 32 bits (0-3)
|
|
* going to each of the 4 chips and the word address selecting the bank, even
|
|
* being the low bank and odd the high bank. For 64bit reads, both banks are
|
|
* read simultaneously with the second bank on byte lanes 4-7. Each 28F008S5
|
|
* consists of 16 64Kbyte "block"s. Before programming a byte, the block that
|
|
* the byte resides within must be erased. So if you want to program contiguous
|
|
* memory locations, you must erase all 8 chips at the same time. i.e. the
|
|
* flash on the CMA302 can be viewed as a number of 512Kbyte blocks.
|
|
*
|
|
* Note: I am going to treat banks as 8 Mbytes (1Meg of 64bit words), whereas
|
|
* the example code treats them as a pair of interleaved 1 Mbyte x 32bit banks.
|
|
*/
|
|
|
|
typedef unsigned long c302f_word_t; /* 32 or 64 bit unsigned integer */
|
|
typedef volatile c302f_word_t *c302f_addr_t;
|
|
typedef unsigned long c302f_size_t; /* want this big - at least 32 bit */
|
|
|
|
/* layout of banks on cma302 board */
|
|
#define C302F_BNK_WIDTH 8 /* each bank is 8 chips wide */
|
|
#define C302F_BNK_WSHIFT 3 /* log base 2 of C302F_BNK_WIDTH */
|
|
#define C302F_BNK_NBLOCKS I8S5_NBLOCKS
|
|
#define C302F_BNK_BLKSZ (I8S5_BLKSZ * C302F_BNK_WIDTH)
|
|
#define C302F_BNK_SIZE (I8S5_SIZE * C302F_BNK_WIDTH)
|
|
|
|
#define C302F_MAX_BANKS 2 /* up to 2 banks (8M each) on CMA302 */
|
|
|
|
/* align addresses and sizes to bank boundaries */
|
|
#define C302F_BNK_ADDR_ALIGN(a) ((c302f_addr_t)((c302f_size_t)(a) \
|
|
& ~(C302F_BNK_WIDTH - 1)))
|
|
#define C302F_BNK_SIZE_ALIGN(s) ((c302f_size_t)C302F_BNK_ADDR_ALIGN( \
|
|
(c302f_size_t)(s) + (C302F_BNK_WIDTH - 1)))
|
|
|
|
/* align addresses and sizes to block boundaries */
|
|
#define C302F_BLK_ADDR_ALIGN(a) ((c302f_addr_t)((c302f_size_t)(a) \
|
|
& ~(C302F_BNK_BLKSZ - 1)))
|
|
#define C302F_BLK_SIZE_ALIGN(s) ((c302f_size_t)C302F_BLK_ADDR_ALIGN( \
|
|
(c302f_size_t)(s) + (C302F_BNK_BLKSZ - 1)))
|
|
|
|
/* add a byte offset to a flash address */
|
|
#define C302F_ADDR_ADD_BYTEOFF(a,o) \
|
|
(c302f_addr_t)((c302f_size_t)(a) + (o))
|
|
|
|
/* get base address of bank b, given flash base address a */
|
|
#define C302F_BNK_ADDR_BASE(a,b) \
|
|
C302F_ADDR_ADD_BYTEOFF((a), \
|
|
(c302f_size_t)(b) * C302F_BNK_SIZE)
|
|
|
|
/* adjust an address a (within a bank) to next word, block or bank */
|
|
#define C302F_BNK_ADDR_NEXT_WORD(a) \
|
|
C302F_ADDR_ADD_BYTEOFF((a), C302F_BNK_WIDTH)
|
|
#define C302F_BNK_ADDR_NEXT_BLK(a) \
|
|
C302F_ADDR_ADD_BYTEOFF((a), C302F_BNK_BLKSZ)
|
|
#define C302F_BNK_ADDR_NEXT_BNK(a) \
|
|
C302F_ADDR_ADD_BYTEOFF((a), C302F_BNK_SIZE)
|
|
|
|
/* get bank address of chip register r given a bank base address a */
|
|
#define C302F_BNK_ADDR_I8S5REG(a,r) \
|
|
C302F_ADDR_ADD_BYTEOFF((a), \
|
|
(r) << C302F_BNK_WSHIFT)
|
|
|
|
/* make a bank representation for each chip address */
|
|
|
|
#define C302F_BNK_ADDR_MAN(a) C302F_BNK_ADDR_I8S5REG((a), I8S5_ADDR_MAN)
|
|
#define C302F_BNK_ADDR_DEV(a) C302F_BNK_ADDR_I8S5REG((a), I8S5_ADDR_DEV)
|
|
#define C302F_BNK_ADDR_CFGM(a) C302F_BNK_ADDR_I8S5REG((a), I8S5_ADDR_CFGM)
|
|
#define C302F_BNK_ADDR_CFG(b,a) C302F_BNK_ADDR_I8S5REG((a), I8S5_ADDR_CFG(b))
|
|
|
|
/*
|
|
* replicate a chip cmd/stat/rd value into each byte position within a word
|
|
* so that multiple chips are accessed in a single word i/o operation
|
|
*
|
|
* this must be as wide as the c302f_word_t type
|
|
*/
|
|
#define C302F_FILL_WORD(o) (((unsigned long)(o) << 24) | \
|
|
((unsigned long)(o) << 16) | \
|
|
((unsigned long)(o) << 8) | \
|
|
(unsigned long)(o))
|
|
|
|
/* make a bank representation for each chip cmd/stat/rd value */
|
|
|
|
/* Commands */
|
|
#define C302F_BNK_CMD_RST C302F_FILL_WORD(I8S5_CMD_RST)
|
|
#define C302F_BNK_CMD_RD_ID C302F_FILL_WORD(I8S5_CMD_RD_ID)
|
|
#define C302F_BNK_CMD_RD_STAT C302F_FILL_WORD(I8S5_CMD_RD_STAT)
|
|
#define C302F_BNK_CMD_CLR_STAT C302F_FILL_WORD(I8S5_CMD_CLR_STAT)
|
|
#define C302F_BNK_CMD_ERASE1 C302F_FILL_WORD(I8S5_CMD_ERASE1)
|
|
#define C302F_BNK_CMD_ERASE2 C302F_FILL_WORD(I8S5_CMD_ERASE2)
|
|
#define C302F_BNK_CMD_PROG C302F_FILL_WORD(I8S5_CMD_PROG)
|
|
#define C302F_BNK_CMD_LOCK C302F_FILL_WORD(I8S5_CMD_LOCK)
|
|
#define C302F_BNK_CMD_SET_LOCK_BLK C302F_FILL_WORD(I8S5_CMD_SET_LOCK_BLK)
|
|
#define C302F_BNK_CMD_SET_LOCK_MSTR C302F_FILL_WORD(I8S5_CMD_SET_LOCK_MSTR)
|
|
#define C302F_BNK_CMD_CLR_LOCK_BLK C302F_FILL_WORD(I8S5_CMD_CLR_LOCK_BLK)
|
|
|
|
/* status register bits */
|
|
#define C302F_BNK_STAT_DPS C302F_FILL_WORD(I8S5_STAT_DPS)
|
|
#define C302F_BNK_STAT_PSS C302F_FILL_WORD(I8S5_STAT_PSS)
|
|
#define C302F_BNK_STAT_VPPS C302F_FILL_WORD(I8S5_STAT_VPPS)
|
|
#define C302F_BNK_STAT_PSLBS C302F_FILL_WORD(I8S5_STAT_PSLBS)
|
|
#define C302F_BNK_STAT_ECLBS C302F_FILL_WORD(I8S5_STAT_ECLBS)
|
|
#define C302F_BNK_STAT_ESS C302F_FILL_WORD(I8S5_STAT_ESS)
|
|
#define C302F_BNK_STAT_RDY C302F_FILL_WORD(I8S5_STAT_RDY)
|
|
|
|
#define C302F_BNK_STAT_ERR C302F_FILL_WORD(I8S5_STAT_ERR)
|
|
|
|
/* ID and Lock Configuration */
|
|
#define C302F_BNK_RD_ID_LOCK C302F_FILL_WORD(I8S5_RD_ID_LOCK)
|
|
#define C302F_BNK_RD_ID_MAN C302F_FILL_WORD(I8S5_RD_ID_MAN)
|
|
#define C302F_BNK_RD_ID_DEV C302F_FILL_WORD(I8S5_RD_ID_DEV)
|
|
|
|
/*************** DEFINES for Cogent Motherboard Flash ************************/
|
|
|
|
typedef unsigned short cmbf_word_t; /* 16 bit unsigned integer */
|
|
typedef volatile cmbf_word_t *cmbf_addr_t;
|
|
typedef unsigned long cmbf_size_t; /* want this big - at least 32 bit */
|
|
|
|
/* layout of banks on cogent motherboard - only 1 bank, 16 bit wide */
|
|
#define CMBF_BNK_WIDTH 1 /* each bank is one chip wide */
|
|
#define CMBF_BNK_WSHIFT 0 /* log base 2 of CMBF_BNK_WIDTH */
|
|
#define CMBF_BNK_NBLOCKS I8B5_NBLOCKS
|
|
#define CMBF_BNK_BLKSZ (I8B5_BLKSZ * CMBF_BNK_WIDTH)
|
|
#define CMBF_BNK_SIZE (I8B5_SIZE * CMBF_BNK_WIDTH)
|
|
|
|
#define CMBF_MAX_BANKS 1 /* only 1 x 1Mbyte bank on cogent m/b */
|
|
|
|
/* align addresses and sizes to bank boundaries */
|
|
#define CMBF_BNK_ADDR_ALIGN(a) ((c302f_addr_t)((c302f_size_t)(a) \
|
|
& ~(CMBF_BNK_WIDTH - 1)))
|
|
#define CMBF_BNK_SIZE_ALIGN(s) ((c302f_size_t)CMBF_BNK_ADDR_ALIGN( \
|
|
(c302f_size_t)(s) + (CMBF_BNK_WIDTH - 1)))
|
|
|
|
/* align addresses and sizes to block boundaries */
|
|
#define CMBF_BLK_ADDR_ALIGN(a) ((c302f_addr_t)((c302f_size_t)(a) \
|
|
& ~(CMBF_BNK_BLKSZ - 1)))
|
|
#define CMBF_BLK_SIZE_ALIGN(s) ((c302f_size_t)CMBF_BLK_ADDR_ALIGN( \
|
|
(c302f_size_t)(s) + (CMBF_BNK_BLKSZ - 1)))
|
|
|
|
/* add a byte offset to a flash address */
|
|
#define CMBF_ADDR_ADD_BYTEOFF(a,o) \
|
|
(c302f_addr_t)((c302f_size_t)(a) + (o))
|
|
|
|
/* get base address of bank b, given flash base address a */
|
|
#define CMBF_BNK_ADDR_BASE(a,b) \
|
|
CMBF_ADDR_ADD_BYTEOFF((a), \
|
|
(c302f_size_t)(b) * CMBF_BNK_SIZE)
|
|
|
|
/* adjust an address a (within a bank) to next word, block or bank */
|
|
#define CMBF_BNK_ADDR_NEXT_WORD(a) \
|
|
CMBF_ADDR_ADD_BYTEOFF((a), CMBF_BNK_WIDTH)
|
|
#define CMBF_BNK_ADDR_NEXT_BLK(a) \
|
|
CMBF_ADDR_ADD_BYTEOFF((a), CMBF_BNK_BLKSZ)
|
|
#define CMBF_BNK_ADDR_NEXT_BNK(a) \
|
|
CMBF_ADDR_ADD_BYTEOFF((a), CMBF_BNK_SIZE)
|
|
|
|
/* get bank address of chip register r given a bank base address a */
|
|
#define CMBF_BNK_ADDR_I8B5REG(a,r) \
|
|
CMBF_ADDR_ADD_BYTEOFF((a), \
|
|
(r) << CMBF_BNK_WSHIFT)
|
|
|
|
/* make a bank representation for each chip address */
|
|
|
|
#define CMBF_BNK_ADDR_MAN(a) CMBF_BNK_ADDR_I8B5REG((a), I8B5_ADDR_MAN)
|
|
#define CMBF_BNK_ADDR_DEV(a) CMBF_BNK_ADDR_I8B5REG((a), I8B5_ADDR_DEV)
|
|
#define CMBF_BNK_ADDR_CFGM(a) CMBF_BNK_ADDR_I8B5REG((a), I8B5_ADDR_CFGM)
|
|
#define CMBF_BNK_ADDR_CFG(b,a) CMBF_BNK_ADDR_I8B5REG((a), I8B5_ADDR_CFG(b))
|
|
|
|
/*
|
|
* replicate a chip cmd/stat/rd value into each byte position within a word
|
|
* so that multiple chips are accessed in a single word i/o operation
|
|
*
|
|
* this must be as wide as the c302f_word_t type
|
|
*/
|
|
#define CMBF_FILL_WORD(o) (((unsigned long)(o) << 24) | \
|
|
((unsigned long)(o) << 16) | \
|
|
((unsigned long)(o) << 8) | \
|
|
(unsigned long)(o))
|
|
|
|
/* make a bank representation for each chip cmd/stat/rd value */
|
|
|
|
/* Commands */
|
|
#define CMBF_BNK_CMD_RST CMBF_FILL_WORD(I8B5_CMD_RST)
|
|
#define CMBF_BNK_CMD_RD_ID CMBF_FILL_WORD(I8B5_CMD_RD_ID)
|
|
#define CMBF_BNK_CMD_RD_STAT CMBF_FILL_WORD(I8B5_CMD_RD_STAT)
|
|
#define CMBF_BNK_CMD_CLR_STAT CMBF_FILL_WORD(I8B5_CMD_CLR_STAT)
|
|
#define CMBF_BNK_CMD_ERASE1 CMBF_FILL_WORD(I8B5_CMD_ERASE1)
|
|
#define CMBF_BNK_CMD_ERASE2 CMBF_FILL_WORD(I8B5_CMD_ERASE2)
|
|
#define CMBF_BNK_CMD_PROG CMBF_FILL_WORD(I8B5_CMD_PROG)
|
|
#define CMBF_BNK_CMD_LOCK CMBF_FILL_WORD(I8B5_CMD_LOCK)
|
|
#define CMBF_BNK_CMD_SET_LOCK_BLK CMBF_FILL_WORD(I8B5_CMD_SET_LOCK_BLK)
|
|
#define CMBF_BNK_CMD_SET_LOCK_MSTR CMBF_FILL_WORD(I8B5_CMD_SET_LOCK_MSTR)
|
|
#define CMBF_BNK_CMD_CLR_LOCK_BLK CMBF_FILL_WORD(I8B5_CMD_CLR_LOCK_BLK)
|
|
|
|
/* status register bits */
|
|
#define CMBF_BNK_STAT_DPS CMBF_FILL_WORD(I8B5_STAT_DPS)
|
|
#define CMBF_BNK_STAT_PSS CMBF_FILL_WORD(I8B5_STAT_PSS)
|
|
#define CMBF_BNK_STAT_VPPS CMBF_FILL_WORD(I8B5_STAT_VPPS)
|
|
#define CMBF_BNK_STAT_PSLBS CMBF_FILL_WORD(I8B5_STAT_PSLBS)
|
|
#define CMBF_BNK_STAT_ECLBS CMBF_FILL_WORD(I8B5_STAT_ECLBS)
|
|
#define CMBF_BNK_STAT_ESS CMBF_FILL_WORD(I8B5_STAT_ESS)
|
|
#define CMBF_BNK_STAT_RDY CMBF_FILL_WORD(I8B5_STAT_RDY)
|
|
|
|
#define CMBF_BNK_STAT_ERR CMBF_FILL_WORD(I8B5_STAT_ERR)
|
|
|
|
/* ID and Lock Configuration */
|
|
#define CMBF_BNK_RD_ID_LOCK CMBF_FILL_WORD(I8B5_RD_ID_LOCK)
|
|
#define CMBF_BNK_RD_ID_MAN CMBF_FILL_WORD(I8B5_RD_ID_MAN)
|
|
#define CMBF_BNK_RD_ID_DEV CMBF_FILL_WORD(I8B5_RD_ID_DEV)
|