mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 23:02:59 +00:00
c2120fbfbc
The sandburst-specific i2c drivers have been deleted, conflict was just over the SPDX conversion. Conflicts: board/sandburst/common/ppc440gx_i2c.c board/sandburst/common/ppc440gx_i2c.h Signed-off-by: Tom Rini <trini@ti.com>
318 lines
6.3 KiB
C
318 lines
6.3 KiB
C
/*
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <netdev.h>
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
#include <fsl_esdhc.h>
|
|
#endif
|
|
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
#endif
|
|
|
|
#ifdef CONFIG_MXC_OCOTP
|
|
void enable_ocotp_clk(unsigned char enable)
|
|
{
|
|
struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
|
|
u32 reg;
|
|
|
|
reg = readl(&ccm->ccgr6);
|
|
if (enable)
|
|
reg |= CCM_CCGR6_OCOTP_CTRL_MASK;
|
|
else
|
|
reg &= ~CCM_CCGR6_OCOTP_CTRL_MASK;
|
|
writel(reg, &ccm->ccgr6);
|
|
}
|
|
#endif
|
|
|
|
static u32 get_mcu_main_clk(void)
|
|
{
|
|
struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
|
|
u32 ccm_ccsr, ccm_cacrr, armclk_div;
|
|
u32 sysclk_sel, pll_pfd_sel = 0;
|
|
u32 freq = 0;
|
|
|
|
ccm_ccsr = readl(&ccm->ccsr);
|
|
sysclk_sel = ccm_ccsr & CCM_CCSR_SYS_CLK_SEL_MASK;
|
|
sysclk_sel >>= CCM_CCSR_SYS_CLK_SEL_OFFSET;
|
|
|
|
ccm_cacrr = readl(&ccm->cacrr);
|
|
armclk_div = ccm_cacrr & CCM_CACRR_ARM_CLK_DIV_MASK;
|
|
armclk_div >>= CCM_CACRR_ARM_CLK_DIV_OFFSET;
|
|
armclk_div += 1;
|
|
|
|
switch (sysclk_sel) {
|
|
case 0:
|
|
freq = FASE_CLK_FREQ;
|
|
break;
|
|
case 1:
|
|
freq = SLOW_CLK_FREQ;
|
|
break;
|
|
case 2:
|
|
pll_pfd_sel = ccm_ccsr & CCM_CCSR_PLL2_PFD_CLK_SEL_MASK;
|
|
pll_pfd_sel >>= CCM_CCSR_PLL2_PFD_CLK_SEL_OFFSET;
|
|
if (pll_pfd_sel == 0)
|
|
freq = PLL2_MAIN_FREQ;
|
|
else if (pll_pfd_sel == 1)
|
|
freq = PLL2_PFD1_FREQ;
|
|
else if (pll_pfd_sel == 2)
|
|
freq = PLL2_PFD2_FREQ;
|
|
else if (pll_pfd_sel == 3)
|
|
freq = PLL2_PFD3_FREQ;
|
|
else if (pll_pfd_sel == 4)
|
|
freq = PLL2_PFD4_FREQ;
|
|
break;
|
|
case 3:
|
|
freq = PLL2_MAIN_FREQ;
|
|
break;
|
|
case 4:
|
|
pll_pfd_sel = ccm_ccsr & CCM_CCSR_PLL1_PFD_CLK_SEL_MASK;
|
|
pll_pfd_sel >>= CCM_CCSR_PLL1_PFD_CLK_SEL_OFFSET;
|
|
if (pll_pfd_sel == 0)
|
|
freq = PLL1_MAIN_FREQ;
|
|
else if (pll_pfd_sel == 1)
|
|
freq = PLL1_PFD1_FREQ;
|
|
else if (pll_pfd_sel == 2)
|
|
freq = PLL1_PFD2_FREQ;
|
|
else if (pll_pfd_sel == 3)
|
|
freq = PLL1_PFD3_FREQ;
|
|
else if (pll_pfd_sel == 4)
|
|
freq = PLL1_PFD4_FREQ;
|
|
break;
|
|
case 5:
|
|
freq = PLL3_MAIN_FREQ;
|
|
break;
|
|
default:
|
|
printf("unsupported system clock select\n");
|
|
}
|
|
|
|
return freq / armclk_div;
|
|
}
|
|
|
|
static u32 get_bus_clk(void)
|
|
{
|
|
struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
|
|
u32 ccm_cacrr, busclk_div;
|
|
|
|
ccm_cacrr = readl(&ccm->cacrr);
|
|
|
|
busclk_div = ccm_cacrr & CCM_CACRR_BUS_CLK_DIV_MASK;
|
|
busclk_div >>= CCM_CACRR_BUS_CLK_DIV_OFFSET;
|
|
busclk_div += 1;
|
|
|
|
return get_mcu_main_clk() / busclk_div;
|
|
}
|
|
|
|
static u32 get_ipg_clk(void)
|
|
{
|
|
struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
|
|
u32 ccm_cacrr, ipgclk_div;
|
|
|
|
ccm_cacrr = readl(&ccm->cacrr);
|
|
|
|
ipgclk_div = ccm_cacrr & CCM_CACRR_IPG_CLK_DIV_MASK;
|
|
ipgclk_div >>= CCM_CACRR_IPG_CLK_DIV_OFFSET;
|
|
ipgclk_div += 1;
|
|
|
|
return get_bus_clk() / ipgclk_div;
|
|
}
|
|
|
|
static u32 get_uart_clk(void)
|
|
{
|
|
return get_ipg_clk();
|
|
}
|
|
|
|
static u32 get_sdhc_clk(void)
|
|
{
|
|
struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
|
|
u32 ccm_cscmr1, ccm_cscdr2, sdhc_clk_sel, sdhc_clk_div;
|
|
u32 freq = 0;
|
|
|
|
ccm_cscmr1 = readl(&ccm->cscmr1);
|
|
sdhc_clk_sel = ccm_cscmr1 & CCM_CSCMR1_ESDHC1_CLK_SEL_MASK;
|
|
sdhc_clk_sel >>= CCM_CSCMR1_ESDHC1_CLK_SEL_OFFSET;
|
|
|
|
ccm_cscdr2 = readl(&ccm->cscdr2);
|
|
sdhc_clk_div = ccm_cscdr2 & CCM_CSCDR2_ESDHC1_CLK_DIV_MASK;
|
|
sdhc_clk_div >>= CCM_CSCDR2_ESDHC1_CLK_DIV_OFFSET;
|
|
sdhc_clk_div += 1;
|
|
|
|
switch (sdhc_clk_sel) {
|
|
case 0:
|
|
freq = PLL3_MAIN_FREQ;
|
|
break;
|
|
case 1:
|
|
freq = PLL3_PFD3_FREQ;
|
|
break;
|
|
case 2:
|
|
freq = PLL1_PFD3_FREQ;
|
|
break;
|
|
case 3:
|
|
freq = get_bus_clk();
|
|
break;
|
|
}
|
|
|
|
return freq / sdhc_clk_div;
|
|
}
|
|
|
|
u32 get_fec_clk(void)
|
|
{
|
|
struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
|
|
u32 ccm_cscmr2, rmii_clk_sel;
|
|
u32 freq = 0;
|
|
|
|
ccm_cscmr2 = readl(&ccm->cscmr2);
|
|
rmii_clk_sel = ccm_cscmr2 & CCM_CSCMR2_RMII_CLK_SEL_MASK;
|
|
rmii_clk_sel >>= CCM_CSCMR2_RMII_CLK_SEL_OFFSET;
|
|
|
|
switch (rmii_clk_sel) {
|
|
case 0:
|
|
freq = ENET_EXTERNAL_CLK;
|
|
break;
|
|
case 1:
|
|
freq = AUDIO_EXTERNAL_CLK;
|
|
break;
|
|
case 2:
|
|
freq = PLL5_MAIN_FREQ;
|
|
break;
|
|
case 3:
|
|
freq = PLL5_MAIN_FREQ / 2;
|
|
break;
|
|
}
|
|
|
|
return freq;
|
|
}
|
|
|
|
static u32 get_i2c_clk(void)
|
|
{
|
|
return get_ipg_clk();
|
|
}
|
|
|
|
unsigned int mxc_get_clock(enum mxc_clock clk)
|
|
{
|
|
switch (clk) {
|
|
case MXC_ARM_CLK:
|
|
return get_mcu_main_clk();
|
|
case MXC_BUS_CLK:
|
|
return get_bus_clk();
|
|
case MXC_IPG_CLK:
|
|
return get_ipg_clk();
|
|
case MXC_UART_CLK:
|
|
return get_uart_clk();
|
|
case MXC_ESDHC_CLK:
|
|
return get_sdhc_clk();
|
|
case MXC_FEC_CLK:
|
|
return get_fec_clk();
|
|
case MXC_I2C_CLK:
|
|
return get_i2c_clk();
|
|
default:
|
|
break;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
/* Dump some core clocks */
|
|
int do_vf610_showclocks(cmd_tbl_t *cmdtp, int flag, int argc,
|
|
char * const argv[])
|
|
{
|
|
printf("\n");
|
|
printf("cpu clock : %8d MHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000);
|
|
printf("bus clock : %8d MHz\n", mxc_get_clock(MXC_BUS_CLK) / 1000000);
|
|
printf("ipg clock : %8d MHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
clocks, CONFIG_SYS_MAXARGS, 1, do_vf610_showclocks,
|
|
"display clocks",
|
|
""
|
|
);
|
|
|
|
#ifdef CONFIG_FEC_MXC
|
|
void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
|
|
{
|
|
struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
|
|
struct fuse_bank *bank = &ocotp->bank[4];
|
|
struct fuse_bank4_regs *fuse =
|
|
(struct fuse_bank4_regs *)bank->fuse_regs;
|
|
|
|
u32 value = readl(&fuse->mac_addr0);
|
|
mac[0] = (value >> 8);
|
|
mac[1] = value;
|
|
|
|
value = readl(&fuse->mac_addr1);
|
|
mac[2] = value >> 24;
|
|
mac[3] = value >> 16;
|
|
mac[4] = value >> 8;
|
|
mac[5] = value;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_DISPLAY_CPUINFO)
|
|
static char *get_reset_cause(void)
|
|
{
|
|
u32 cause;
|
|
struct src *src_regs = (struct src *)SRC_BASE_ADDR;
|
|
|
|
cause = readl(&src_regs->srsr);
|
|
writel(cause, &src_regs->srsr);
|
|
cause &= 0xff;
|
|
|
|
switch (cause) {
|
|
case 0x08:
|
|
return "WDOG";
|
|
case 0x20:
|
|
return "JTAG HIGH-Z";
|
|
case 0x80:
|
|
return "EXTERNAL RESET";
|
|
case 0xfd:
|
|
return "POR";
|
|
default:
|
|
return "unknown reset";
|
|
}
|
|
}
|
|
|
|
int print_cpuinfo(void)
|
|
{
|
|
printf("CPU: Freescale Vybrid VF610 at %d MHz\n",
|
|
mxc_get_clock(MXC_ARM_CLK) / 1000000);
|
|
printf("Reset cause: %s\n", get_reset_cause());
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int cpu_eth_init(bd_t *bis)
|
|
{
|
|
int rc = -ENODEV;
|
|
|
|
#if defined(CONFIG_FEC_MXC)
|
|
rc = fecmxc_initialize(bis);
|
|
#endif
|
|
|
|
return rc;
|
|
}
|
|
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
int cpu_mmc_init(bd_t *bis)
|
|
{
|
|
return fsl_esdhc_mmc_init(bis);
|
|
}
|
|
#endif
|
|
|
|
int get_clocks(void)
|
|
{
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
|
|
#endif
|
|
return 0;
|
|
}
|