u-boot/board/eltec/elppc/asm_init.S
Wolfgang Denk 700a0c648d Add common (with Linux) MTD partition scheme and "mtdparts" command
Old, obsolete and duplicated code was cleaned up and replace by the
new partitioning method. There are two possible approaches now:
* define a single, static partition
* use mtdparts command line option and dynamic partitioning
Default is static partitioning.
2005-08-08 01:03:24 +02:00

878 lines
22 KiB
ArmAsm

/*
* (C) Copyright 2001 ELTEC Elektronik AG
* Frank Gottschling <fgottschling@eltec.de>
*
* ELTEC ELPPC RAM initialization
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <asm/processor.h>
#include <version.h>
#include <mpc106.h>
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
.globl board_asm_init
board_asm_init:
/*
* setup pointer to message block
*/
mflr r13 /* save away link register */
bl get_lnk_reg /* r3=addr of next instruction */
subi r4, r3, 8 /* r4=board_asm_init addr */
addi r29, r4, (MessageBlock-board_asm_init)
/*
* dcache_disable
*/
mfspr r3, HID0
li r4, HID0_DCE
andc r3, r3, r4
mr r2, r3
ori r3, r3, HID0_DCI
sync
mtspr HID0, r3
mtspr HID0, r2
isync
sync
/*
* icache_disable
*/
mfspr r3, HID0
li r4, 0
ori r4, r4, HID0_ICE
andc r3, r3, r4
sync
mtspr HID0, r3
/*
* invalidate caches
*/
ori r3, r3, (HID0_ICE | HID0_ICFI | HID0_DCI | HID0_DCE)
or r4, r4, r3
isync
mtspr HID0, r4
andc r4, r4, r3
isync
mtspr HID0, r4
isync
/*
* icache_enable
*/
mfspr r3, HID0
ori r3, r3, (HID0_ICE | HID0_ICFI)
sync
mtspr HID0, r3
/*
* setup memory controller
*/
lis r1, MPC106_REG_ADDR@h
ori r1, r1, MPC106_REG_ADDR@l
lis r2, MPC106_REG_DATA@h
ori r2, r2, MPC106_REG_DATA@l
/* Configure PICR1 */
lis r3, MPC106_REG@h
ori r3, r3, PCI_PICR1
stwbrx r3, 0, r1
addis r3, r0, 0xFF14
ori r3, r3, 0x1CC8
eieio
stwbrx r3, 0, r2
/* Configure PICR2 */
lis r3, MPC106_REG@h
ori r3, r3, PCI_PICR2
stwbrx r3, 0, r1
addis r3, r0, 0x0000
ori r3, r3, 0x0000
eieio
stwbrx r3, 0, r2
/* Configure EUMBAR */
lis r3, MPC106_REG@h
ori r3, r3, 0x0078 /* offest of EUMBAR in PCI config space */
stwbrx r3, 0, r1
lis r3, MPC107_EUMB_ADDR@h
eieio
stwbrx r3, 0, r2
/* Configure Address Map B Option Reg */
lis r3, MPC106_REG@h
ori r3, r3, 0x00e0 /* offest of AMBOR in PCI config space */
stwbrx r3, 0, r1
lis r3, 0
eieio
stwbrx r3, 0, r2
/* Configure I2C Controller */
lis r14, MPC107_I2C_ADDR@h /* base of I2C controller */
ori r14, r14, MPC107_I2C_ADDR@l
lis r3, 0x2b10 /* I2C clock = 100MHz/1024 */
stw r3, 4(r14)
li r3, 0 /* clear arbitration */
eieio
stw r3, 12(r14)
/* Configure MCCR1 */
lis r3, MPC106_REG@h
ori r3, r3, MPC106_MCCR1
stwbrx r3, 0, r1
addis r3, r0, 0x0660 /* don't set MEMGO now ! */
ori r3, r3, 0x0000
eieio
stwbrx r3, 0, r2
/* Configure MCCR2 */
lis r3, MPC106_REG@h
ori r3, r3, MPC106_MCCR2
stwbrx r3, 0, r1
addis r3, r0, 0x0400
ori r3, r3, 0x1800
eieio
stwbrx r3, 0, r2
/* Configure MCCR3 */
lis r3, MPC106_REG@h
ori r3, r3, MPC106_MCCR3
stwbrx r3, 0, r1
addis r3, r0, 0x0230
ori r3, r3, 0x0000
eieio
stwbrx r3, 0, r2
/* Configure MCCR4 */
lis r3, MPC106_REG@h
ori r3, r3, MPC106_MCCR4
stwbrx r3, 0, r1
addis r3, r0, 0x2532
ori r3, r3, 0x2220
eieio
stwbrx r3, 0, r2
/*
* configure memory interface (MICRs)
*/
addis r3, r0, 0x8000 /* ADDR_80 */
ori r3, r3, 0x0080 /* SMEMADD1 */
stwbrx r3, 0, r1
addis r3, r0, 0xFFFF
ori r3, r3, 0x4000
eieio
stwbrx r3, 0, r2
addis r3, r0, 0x8000 /* ADDR_84 */
ori r3, r3, 0x0084 /* SMEMADD2 */
stwbrx r3, 0, r1
addis r3, r0, 0xFFFF
ori r3, r3, 0xFFFF
eieio
stwbrx r3, 0, r2
addis r3, r0, 0x8000 /* ADDR_88 */
ori r3, r3, 0x0088 /* EXTSMEM1 */
stwbrx r3, 0, r1
addis r3, r0, 0x0303
ori r3, r3, 0x0000
eieio
stwbrx r3, 0, r2
addis r3, r0, 0x8000 /* ADDR_8C */
ori r3, r3, 0x008c /* EXTSMEM2 */
stwbrx r3, 0, r1
addis r3, r0, 0x0303
ori r3, r3, 0x0303
eieio
stwbrx r3, 0, r2
addis r3, r0, 0x8000 /* ADDR_90 */
ori r3, r3, 0x0090 /* EMEMADD1 */
stwbrx r3, 0, r1
addis r3, r0, 0xFFFF
ori r3, r3, 0x7F3F
eieio
stwbrx r3, 0, r2
addis r3, r0, 0x8000 /* ADDR_94 */
ori r3, r3, 0x0094 /* EMEMADD2 */
stwbrx r3, 0, r1
addis r3, r0, 0xFFFF
ori r3, r3, 0xFFFF
eieio
stwbrx r3, 0, r2
addis r3, r0, 0x8000 /* ADDR_98 */
ori r3, r3, 0x0098 /* EXTEMEM1 */
stwbrx r3, 0, r1
addis r3, r0, 0x0303
ori r3, r3, 0x0000
eieio
stwbrx r3, 0, r2
addis r3, r0, 0x8000 /* ADDR_9C */
ori r3, r3, 0x009c /* EXTEMEM2 */
stwbrx r3, 0, r1
addis r3, r0, 0x0303
ori r3, r3, 0x0303
eieio
stwbrx r3, 0, r2
addis r3, r0, 0x8000 /* ADDR_A0 */
ori r3, r3, 0x00a0 /* MEMBNKEN */
stwbrx r3, 0, r1
addis r3, r0, 0x0000
ori r3, r3, 0x0003
eieio
stwbrx r3, 0, r2
/*
* must wait at least 100us after HRESET to issue a MEMGO
*/
lis r0, 1
mtctr r0
memStartWait:
bdnz memStartWait
/*
* enable RAM Operations through MCCR1 (MEMGO)
*/
lis r3, 0x8000
ori r3, r3, 0x00f0
stwbrx r3, r0, r1
sync
lwbrx r3, 0, r2
lis r0, 0x0008
or r3, r0, r3
stwbrx r3, 0, r2
sync
/*
* set LEDs first time
*/
li r3, 0x1
lis r30, CFG_USR_LED_BASE@h
stb r3, 2(r30)
sync
/*
* init COM1 for polled output
*/
lis r8, CFG_NS16550_COM1@h /* COM1 base address*/
ori r8, r8, CFG_NS16550_COM1@l
li r9, 0x00
stb r9, 1(r8) /* int disabled */
eieio
li r9, 0x00
stb r9, 4(r8) /* modem ctrl */
eieio
li r9, 0x80
stb r9, 3(r8) /* link ctrl */
eieio
li r9, (CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE)
stb r9, 0(r8) /* baud rate (LSB)*/
eieio
li r9, ((CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE) >> 8)
stb r9, 1(r8) /* baud rate (MSB) */
eieio
li r9, 0x07
stb r9, 3(r8) /* 8 data bits, 2 stop bit, no parity */
eieio
li r9, 0x0b
stb r9, 4(r8) /* enable the receiver and transmitter (modem ctrl) */
eieio
waitEmpty:
lbz r9, 5(r8) /* transmit empty */
andi. r9, r9, 0x40
beq waitEmpty
li r9, 0x47
stb r9, 3(r8) /* send break, 8 data bits, 2 stop bit, no parity */
eieio
lis r0, 0x0001
mtctr r0
waitCOM1:
lwz r0, 5(r8) /* load from port for delay */
bdnz waitCOM1
waitEmpty1:
lbz r9, 5(r8) /* transmit empty */
andi. r9, r9, 0x40
beq waitEmpty1
li r9, 0x07
stb r9, 3(r8) /* 8 data bits, 2 stop bit, no parity */
eieio
/*
* intro message from message block
*/
addi r3, r29, (MnewLine-MessageBlock)
bl Printf
addi r3, r29, (MinitLogo-MessageBlock)
bl Printf
/*
* memory cofiguration using SPD information stored on the SODIMMs
*/
addi r3, r29, (Mspd01-MessageBlock)
bl Printf
li r17, 0
li r3, 0x0002 /* get RAM type from spd for bank0/1 */
bl spdRead
cmpi 0, 0, r3, -1 /* error ? */
bne noSpdError
addi r3, r29, (Mfail-MessageBlock)
bl Printf
li r6, 0xe /* error codes in r6 and r7 */
li r7, 0x0
b toggleError /* fail - loop forever */
noSpdError:
mr r15, r3 /* save r3 */
addi r3, r29, (Mok-MessageBlock)
bl Printf
cmpli 0, 0, r15, 0x0004 /* SDRAM ? */
beq isSDRAM
addi r3, r29, (MramTyp-MessageBlock)
bl Printf
li r6, 0xd /* error codes in r6 and r7 */
li r7, 0x0
b toggleError /* fail - loop forever */
isSDRAM:
li r3, 0x0012 /* get supported CAS latencies from byte 18 */
bl spdRead
mr r15, r3
li r3, 0x09
andi. r0, r15, 0x04
bne maxCLis3
li r3, 0x17
maxCLis3:
andi. r0, r15, 0x02
bne CL2
addi r3, r29, (MramTyp-MessageBlock)
bl Printf
li r6, 0xc /* error codes in r6 and r7 */
li r7, 0x0
b toggleError /* fail - loop forever */
CL2:
bl spdRead
cmpli 0, 0, r3, 0xa1 /* cycle time must be 10ns max. */
blt speedOk
addi r3, r29, (MramTyp-MessageBlock)
bl Printf
li r6, 0xb /* error codes in r6 and r7 */
li r7, 0x0
b toggleError /* fail - loop forever */
speedOk:
lis r20, 0x06e8 /* preset MCR1 value */
li r3, 0x0011 /* get number of internal banks from spd for bank0/1 */
bl spdRead
cmpli 0, 0, r3, 0x02
beq SD_2B
cmpli 0, 0, r3, 0x04
beq SD_4B
memConfErr:
addi r3, r29, (MramConfErr-MessageBlock)
bl Printf
li r6, 0xa /* error codes in r6 and r7 */
li r7, 0x0
b toggleError /* fail - loop forever */
SD_2B:
li r3, 0x0003 /* get number of row bits from spd for bank0/1 */
bl spdRead
cmpli 0, 0, r3, 0x0b
beq row11x2
cmpli 0, 0, r3, 0x0c
beq row12x2or13x2
cmpli 0, 0, r3, 0x0d
beq row12x2or13x2
b memConfErr
SD_4B:
li r3, 0x0003 /* get number of row bits from spd for bank0/1 */
bl spdRead
cmpli 0, 0, r3, 0x0b
beq row11x4or12x4
cmpli 0, 0, r3, 0x0c
beq row11x4or12x4
cmpli 0, 0, r3, 0x0d
beq row13x4
b memConfErr
row12x2or13x2:
ori r20, r20, 0x05
b row11x4or12x4
row13x4:
ori r20, r20, 0x0a
b row11x4or12x4
row11x2:
ori r20, r20, 0x0f
row11x4or12x4:
/* get the size of bank 0-1 */
li r3, 0x001f /* get bank size from spd for bank0/1 */
bl spdRead
rlwinm r16, r3, 2, 24, 29 /* calculate size in MByte (128 MB max.) */
li r3, 0x0005 /* get number of banks from spd for bank0/1 */
bl spdRead
cmpi 0, 0, r3, 2 /* 2 banks ? */
bne SDRAMnobank1
mr r17, r16
SDRAMnobank1:
li r3, 0x000c /* get refresh from spd for bank0/1 */
bl spdRead
andi. r3, r3, 0x007f /* mask selfrefresh bit */
li r4, 0x1800 /* refesh cycle 1536 clocks left shifted 2 */
cmpli 0, 0, r3, 0x0000 /* 15.6 us ? */
beq writeRefresh
li r4, 0x0c00 /* refesh cycle 768 clocks left shifted 2 */
cmpli 0, 0, r3, 0x0002 /* 7.8 us ? */
beq writeRefresh
li r4, 0x3000 /* refesh cycle 3072 clocks left shifted 2 */
cmpli 0, 0, r3, 0x0003 /* 31.3 us ? */
beq writeRefresh
li r4, 0x6000 /* refesh cycle 6144 clocks left shifted 2 */
cmpli 0, 0, r3, 0x0004 /* 62.5 us ? */
beq writeRefresh
li r4, 0
ori r4, r4, 0xc000 /* refesh cycle 8224 clocks left shifted 2 */
cmpli 0, 0, r3, 0x0005 /* 125 us ? */
beq writeRefresh
b memConfErr
writeRefresh:
lis r21, 0x0400 /* preset MCCR2 value */
or r21, r21, r4
/* Overwrite MCCR1 */
lis r3, MPC106_REG@h
ori r3, r3, MPC106_MCCR1
stwbrx r3, 0, r1
eieio
stwbrx r20, 0, r2
/* Overwrite MCCR2 */
lis r3, MPC106_REG@h
ori r3, r3, MPC106_MCCR2
stwbrx r3, 0, r1
eieio
stwbrx r21, 0, r2
/* set the memory boundary registers for bank 0-3 */
li r20, 0
lis r23, 0x0303
lis r24, 0x0303
subi r21, r16, 1 /* calculate end address bank0 */
li r22, 1
cmpi 0, 0, r17, 0 /* bank1 present ? */
beq nobank1
andi. r3, r16, 0x00ff /* calculate start address of bank1 */
andi. r4, r16, 0x0300
rlwinm r3, r3, 8, 16, 23
or r20, r20, r3
or r23, r23, r4
add r16, r16, r17 /* add to total memory size */
subi r3, r16, 1 /* calculate end address of bank1 */
andi. r4, r3, 0x0300
andi. r3, r3, 0x00ff
rlwinm r3, r3, 8, 16, 23
or r21, r21, r3
or r24, r24, r4
ori r22, r22, 2 /* enable bank1 */
b bankOk
nobank1:
ori r23, r23, 0x0300 /* set bank1 start to unused area */
ori r24, r24, 0x0300 /* set bank1 end to unused area */
bankOk:
addi r3, r29, (Mactivate-MessageBlock)
bl Printf
mr r3, r16
bl OutDec
addi r3, r29, (Mact0123e-MessageBlock)
bl Printf
/*
* overwrite MSAR1, MEAR1, EMSAR1, and EMEAR1
*/
addis r3, r0, 0x8000 /* ADDR_80 */
ori r3, r3, 0x0080 /* MSAR1 */
stwbrx r3, 0, r1
eieio
stwbrx r20, 0, r2
addis r3, r0, 0x8000 /* ADDR_88 */
ori r3, r3, 0x0088 /* EMSAR1 */
stwbrx r3, 0, r1
eieio
stwbrx r23, 0, r2
addis r3, r0, 0x8000 /* ADDR_90 */
ori r3, r3, 0x0090 /* MEAR1 */
stwbrx r3, 0, r1
eieio
stwbrx r21, 0, r2
addis r3, r0, 0x8000 /* ADDR_98 */
ori r3, r3, 0x0098 /* EMEAR1 */
stwbrx r3, 0, r1
eieio
stwbrx r24, 0, r2
addis r3, r0, 0x8000 /* ADDR_A0 */
ori r3, r3, 0x00a0 /* MBER */
stwbrx r3, 0, r1
eieio
stwbrx r22, 0, r2
/*
* delay to let SDRAM go through several initialization/refresh cycles
*/
lis r3, 3
mtctr r3
memStartWait_1:
bdnz memStartWait_1
eieio
/*
* set LEDs end
*/
li r3, 0xf
lis r30, CFG_USR_LED_BASE@h
stb r3, 2(r30)
sync
mtlr r13
blr /* EXIT board_asm_init ... */
/*----------------------------------------------------------------------------*/
/*
* print a message to COM1 in polling mode (r10=COM1 port, r3=(char*)string)
*/
Printf:
lis r10, CFG_NS16550_COM1@h /* COM1 base address*/
ori r10, r10, CFG_NS16550_COM1@l
WaitChr:
lbz r0, 5(r10) /* read link status */
eieio
andi. r0, r0, 0x40 /* mask transmitter empty bit */
beq cr0, WaitChr /* wait till empty */
lbzx r0, r0, r3 /* get char */
stb r0, 0(r10) /* write to transmit reg */
eieio
addi r3, r3, 1 /* next char */
lbzx r0, r0, r3 /* get char */
cmpwi cr1, r0, 0 /* end of string ? */
bne cr1, WaitChr
blr
/*
* print a char to COM1 in polling mode (r10=COM1 port, r3=char)
*/
OutChr:
lis r10, CFG_NS16550_COM1@h /* COM1 base address*/
ori r10, r10, CFG_NS16550_COM1@l
OutChr1:
lbz r0, 5(r10) /* read link status */
eieio
andi. r0, r0, 0x40 /* mask transmitter empty bit */
beq cr0, OutChr1 /* wait till empty */
stb r3, 0(r10) /* write to transmit reg */
eieio
blr
/*
* print 8/4/2 digits hex value to COM1 in polling mode (r10=COM1 port, r3=val)
*/
OutHex2:
li r9, 4 /* shift reg for 2 digits */
b OHstart
OutHex4:
li r9, 12 /* shift reg for 4 digits */
b OHstart
OutHex:
li r9, 28 /* shift reg for 8 digits */
OHstart:
lis r10, CFG_NS16550_COM1@h /* COM1 base address*/
ori r10, r10, CFG_NS16550_COM1@l
OutDig:
lbz r0, 0(r29) /* slow down dummy read */
lbz r0, 5(r10) /* read link status */
eieio
andi. r0, r0, 0x40 /* mask transmitter empty bit */
beq cr0, OutDig
sraw r0, r3, r9
clrlwi r0, r0, 28
cmpwi cr1, r0, 9
ble cr1, digIsNum
addic r0, r0, 55
b nextDig
digIsNum:
addic r0, r0, 48
nextDig:
stb r0, 0(r10) /* write to transmit reg */
eieio
addic. r9, r9, -4
bge OutDig
blr
/*
* print 3 digits hdec value to COM1 in polling mode
* (r10=COM1 port, r3=val, r7=x00, r8=x0, r9=x, r0, r6=scratch)
*/
OutDec:
li r6, 10
divwu r0, r3, r6 /* r0 = r3 / 10, r9 = r3 mod 10 */
mullw r10, r0, r6
subf r9, r10, r3
mr r3, r0
divwu r0, r3, r6 /* r0 = r3 / 10, r8 = r3 mod 10 */
mullw r10, r0, r6
subf r8, r10, r3
mr r3, r0
divwu r0, r3, r6 /* r0 = r3 / 10, r7 = r3 mod 10 */
mullw r10, r0, r6
subf r7, r10, r3
lis r10, CFG_NS16550_COM1@h /* COM1 base address*/
ori r10, r10, CFG_NS16550_COM1@l
or. r7, r7, r7
bne noblank1
li r3, 0x20
b OutDec4
noblank1:
addi r3, r7, 48 /* convert to ASCII */
OutDec4:
lbz r0, 0(r29) /* slow down dummy read */
lbz r0, 5(r10) /* read link status */
eieio
andi. r0, r0, 0x40 /* mask transmitter empty bit */
beq cr0, OutDec4
stb r3, 0(r10) /* x00 to transmit */
eieio
or. r7, r7, r8
beq OutDec5
addi r3, r8, 48 /* convert to ASCII */
OutDec5:
lbz r0, 0(r29) /* slow down dummy read */
lbz r0, 5(r10) /* read link status */
eieio
andi. r0, r0, 0x40 /* mask transmitter empty bit */
beq cr0, OutDec5
stb r3, 0(r10) /* x0 to transmit */
eieio
addi r3, r9, 48 /* convert to ASCII */
OutDec6:
lbz r0, 0(r29) /* slow down dummy read */
lbz r0, 5(r10) /* read link status */
eieio
andi. r0, r0, 0x40 /* mask transmitter empty bit */
beq cr0, OutDec6
stb r3, 0(r10) /* x to transmit */
eieio
blr
/*
* hang endless loop
*/
toggleError: /* fail type in r6, r7=0xff, toggle LEDs */
stb r7, 2(r30) /* r7 to LED */
li r0, 0
lis r9, 127
ori r9, r9, 65535
toggleError1:
addic r0, r0, 1
cmpw cr1, r0, r9
ble cr1, toggleError1
stb r6, 2(r30) /* r6 to LED */
li r0, 0
lis r9, 127
ori r9, r9, 65535
toggleError2:
addic r0, r0, 1
cmpw cr1, r0, r9
ble cr1, toggleError2
b toggleError
/*
* routines to read from ram spd
*/
spdWaitIdle:
lis r0, 0x1 /* timeout for about 100us */
mtctr r0
iSpd:
lbz r10, 12(r14)
andi. r10, r10, 0x20 /* mask and test MBB */
beq idle
bdnz iSpd
orc. r10, r0, r0 /* return -1 to caller */
idle:
bclr 20, 0 /* return to caller */
waitSpd:
lis r0, 0x10 /* timeout for about 1.5ms */
mtctr r0
wSpd:
lbz r10, 12(r14)
andi. r10, r10, 0x82
cmpli 0, 0, r10, 0x82 /* test MCF and MIF set */
beq wend
bdnz wSpd
orc. r10, r0, r0 /* return -1 to caller */
bclr 20, 0 /* return to caller */
wend:
li r10, 0
stb r10, 12(r14) /* clear status */
bclr 20, 0 /* return to caller */
/*
* spdread
* in: r3 adr to read
* out: r3 val or -1 for error
* uses r10, assumes that r14 points to I2C controller
*/
spdRead:
mfspr r25, 8 /* save link register */
bl spdWaitIdle
bne spdErr
li r10, 0x80 /* start with MEN */
stb r10, 8(r14)
eieio
li r10, 0xb0 /* start as master */
stb r10, 8(r14)
eieio
li r10, 0xa0 /* write device 0xA0 */
stb r10, 16(r14)
eieio
bl waitSpd
bne spdErr
lbz r10, 12(r14) /* test ACK */
andi. r10, r10, 0x01
bne gotNoAck
stb r3, 16(r14) /* data address */
eieio
bl waitSpd
bne spdErr
li r10, 0xb4 /* switch to read - restart */
stb r10, 8(r14)
eieio
li r10, 0xa1 /* read device 0xA0 */
stb r10, 16(r14)
eieio
bl waitSpd
bne spdErr
li r10, 0xa8 /* no ACK */
stb r10, 8(r14)
eieio
lbz r10, 16(r14) /* trigger read next byte */
eieio
bl waitSpd
bne spdErr
li r10, 0x88 /* generate STOP condition */
stb r10, 8(r14)
eieio
lbz r3, 16(r14) /* return read byte */
mtspr 8, r25 /* restore link register */
blr
gotNoAck:
li r10, 0x80 /* generate STOP condition */
stb r10, 8(r14)
eieio
spdErr:
orc r3, r0, r0 /* return -1 */
mtspr 8, r25 /* restore link register */
blr
get_lnk_reg:
mflr r3 /* return link reg */
blr
MessageBlock:
MinitLogo:
.ascii "\015\012*** ELTEC Elektronik, Mainz ***\015\012"
.ascii "\015\012Initialising RAM\015\012\000"
Mspd01:
.ascii " Reading SPD of SODIMM ...... \000"
MramTyp:
.ascii "\015\012\SDRAM with CL=2 at 100 MHz required!\015\012\000"
MramConfErr:
.ascii "\015\012\Unsupported SODIMM Configuration!\015\012\000"
Mactivate:
.ascii " Activating \000"
Mact0123e:
.ascii " MByte.\015\012\000"
Mok:
.ascii "OK \015\012\000"
Mfail:
.ascii "FAILED \015\012\000"
MnewLine:
.ascii "\015\012\000"
.align 4