mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 02:08:38 +00:00
4c60512ad9
It add documentation on licencing & provides links to the amlogic-boot-fip pre-built files collections. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
117 lines
3.3 KiB
ReStructuredText
117 lines
3.3 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
|
|
U-Boot for Beelink GT-King
|
|
==========================
|
|
|
|
The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference
|
|
board with an S922X-H chip.
|
|
|
|
- 4GB LPDDR4 RAM
|
|
- 64GB eMMC storage
|
|
- 10/100/1000 Base-T Ethernet
|
|
- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
|
|
- HDMI 2.1 video
|
|
- S/PDIF optical output
|
|
- Analogue audio output
|
|
- 1x USB 2.0 port
|
|
- 2x USB 3.0 ports
|
|
- IR receiver
|
|
- 1x micro SD card slot
|
|
|
|
Beelink do not provide public schematics, but have been willing
|
|
to share them with known distro developers on request.
|
|
|
|
U-Boot compilation
|
|
------------------
|
|
|
|
.. code-block:: bash
|
|
|
|
$ export CROSS_COMPILE=aarch64-none-elf-
|
|
$ make beelink-gtking_defconfig
|
|
$ make
|
|
|
|
Image creation
|
|
--------------
|
|
|
|
Amlogic does not provide sources for the firmware and for tools needed
|
|
to create the bootloader image. Beelink have provided the Amlogic "SDK"
|
|
in their forums, but the u-boot sources included result in 2GB RAM being
|
|
detected. The following FIPs were generated with newer private sources
|
|
and give correct (4GB) RAM detection:
|
|
|
|
https://github.com/LibreELEC/amlogic-boot-fip/tree/master/beelink-s922x
|
|
|
|
NB: Beelink use a common board config for GT-King, GT-King Pro and the
|
|
GS-King-X model, hence the "beelink-s922x" name.
|
|
|
|
For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `beelink-s922x`
|
|
|
|
.. code-block:: bash
|
|
|
|
$ wget https://github.com/LibreELEC/amlogic-boot-fip/archive/master.zip
|
|
$ unzip master.zip
|
|
$ export FIPDIR=$PWD/amlogic-boot-fip/beelink-s922x
|
|
|
|
Go back to the mainline U-Boot source tree then:
|
|
|
|
.. code-block:: bash
|
|
|
|
$ mkdir fip
|
|
$ cp $FIPDIR/* fip/
|
|
$ cp u-boot.bin fip/bl33.bin
|
|
|
|
$ sh fip/blx_fix.sh \
|
|
fip/bl30.bin \
|
|
fip/zero_tmp \
|
|
fip/bl30_zero.bin \
|
|
fip/bl301.bin \
|
|
fip/bl301_zero.bin \
|
|
fip/bl30_new.bin \
|
|
bl30
|
|
|
|
$ sh fip/blx_fix.sh \
|
|
fip/bl2.bin \
|
|
fip/zero_tmp \
|
|
fip/bl2_zero.bin \
|
|
fip/acs.bin \
|
|
fip/bl21_zero.bin \
|
|
fip/bl2_new.bin \
|
|
bl2
|
|
|
|
$ fip/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
|
|
--output fip/bl30_new.bin.g12a.enc \
|
|
--level v3
|
|
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
|
|
--output fip/bl30_new.bin.enc \
|
|
--level v3 --type bl30
|
|
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
|
|
--output fip/bl31.img.enc \
|
|
--level v3 --type bl31
|
|
$ fip/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
|
|
--output fip/bl33.bin.enc \
|
|
--level v3 --type bl33
|
|
$ fip/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
|
|
--output fip/bl2.n.bin.sig
|
|
$ fip/aml_encrypt_g12b --bootmk \
|
|
--output fip/u-boot.bin \
|
|
--bl2 fip/bl2.n.bin.sig \
|
|
--bl30 fip/bl30_new.bin.enc \
|
|
--bl31 fip/bl31.img.enc \
|
|
--bl33 fip/bl33.bin.enc \
|
|
--ddrfw1 fip/ddr4_1d.fw \
|
|
--ddrfw2 fip/ddr4_2d.fw \
|
|
--ddrfw3 fip/ddr3_1d.fw \
|
|
--ddrfw4 fip/piei.fw \
|
|
--ddrfw5 fip/lpddr4_1d.fw \
|
|
--ddrfw6 fip/lpddr4_2d.fw \
|
|
--ddrfw7 fip/diag_lpddr4.fw \
|
|
--ddrfw8 fip/aml_ddr.fw \
|
|
--level v3
|
|
|
|
and then write the image to SD with:
|
|
|
|
.. code-block:: bash
|
|
|
|
$ DEV=/dev/your_sd_device
|
|
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
|
|
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
|