mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-03 18:10:13 +00:00
94d5308412
This driver uses the same pin control binding as that of linux, binding document of this patch is copied from linux. One addition done is for GPIO input and output mode configuration which was missing. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
117 lines
2.9 KiB
C
117 lines
2.9 KiB
C
#include <common.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <dm.h>
|
|
#include <dm/pinctrl.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static int prep_gpio_dsc(struct stm32_gpio_dsc *gpio_dsc, u32 port_pin)
|
|
{
|
|
gpio_dsc->port = (port_pin & 0xF000) >> 12;
|
|
gpio_dsc->pin = (port_pin & 0x0F00) >> 8;
|
|
debug("%s: GPIO:port= %d, pin= %d\n", __func__, gpio_dsc->port,
|
|
gpio_dsc->pin);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int prep_gpio_ctl(struct stm32_gpio_ctl *gpio_ctl, u32 gpio_fn, int node)
|
|
{
|
|
gpio_fn &= 0x00FF;
|
|
|
|
switch (gpio_fn) {
|
|
case 0:
|
|
gpio_ctl->mode = STM32_GPIO_MODE_IN;
|
|
break;
|
|
case 1 ... 16:
|
|
gpio_ctl->mode = STM32_GPIO_MODE_AF;
|
|
gpio_ctl->af = gpio_fn - 1;
|
|
break;
|
|
case 17:
|
|
gpio_ctl->mode = STM32_GPIO_MODE_AN;
|
|
break;
|
|
default:
|
|
gpio_ctl->mode = STM32_GPIO_MODE_OUT;
|
|
break;
|
|
}
|
|
|
|
gpio_ctl->speed = fdtdec_get_int(gd->fdt_blob, node, "slew-rate", 0);
|
|
|
|
if (fdtdec_get_bool(gd->fdt_blob, node, "drive-open-drain"))
|
|
gpio_ctl->otype = STM32_GPIO_OTYPE_OD;
|
|
else
|
|
gpio_ctl->otype = STM32_GPIO_OTYPE_PP;
|
|
|
|
if (fdtdec_get_bool(gd->fdt_blob, node, "bias-pull-up"))
|
|
gpio_ctl->pupd = STM32_GPIO_PUPD_UP;
|
|
else if (fdtdec_get_bool(gd->fdt_blob, node, "bias-pull-down"))
|
|
gpio_ctl->pupd = STM32_GPIO_PUPD_DOWN;
|
|
else
|
|
gpio_ctl->pupd = STM32_GPIO_PUPD_NO;
|
|
|
|
debug("%s: gpio fn= %d, slew-rate= %x, op type= %x, pull-upd is = %x\n",
|
|
__func__, gpio_fn, gpio_ctl->speed, gpio_ctl->otype,
|
|
gpio_ctl->pupd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_pinctrl_set_state_simple(struct udevice *dev,
|
|
struct udevice *periph)
|
|
{
|
|
u32 pin_mux[50];
|
|
struct fdtdec_phandle_args args;
|
|
int rv, len;
|
|
|
|
/* Get node pinctrl-0 */
|
|
rv = fdtdec_parse_phandle_with_args(gd->fdt_blob, periph->of_offset,
|
|
"pinctrl-0", 0, 0, 0, &args);
|
|
if (rv)
|
|
return rv;
|
|
/*
|
|
* check for "pinmux" property in each subnode (e.g. pins1 and pins2 for
|
|
* usart1) of pin controller phandle "pinctrl-0"
|
|
* */
|
|
fdt_for_each_subnode(args.node, gd->fdt_blob, args.node) {
|
|
struct stm32_gpio_dsc gpio_dsc;
|
|
struct stm32_gpio_ctl gpio_ctl;
|
|
int i;
|
|
|
|
len = fdtdec_get_int_array_count(gd->fdt_blob, args.node,
|
|
"pinmux", pin_mux,
|
|
ARRAY_SIZE(pin_mux));
|
|
debug("%s: periph->name = %s, no of pinmux entries= %d\n",
|
|
__func__, periph->name, len);
|
|
if (len < 0)
|
|
return -EINVAL;
|
|
for (i = 0; i < len; i++) {
|
|
debug("%s: pinmux = %x\n", __func__, *(pin_mux + i));
|
|
prep_gpio_dsc(&gpio_dsc, *(pin_mux + i));
|
|
prep_gpio_ctl(&gpio_ctl, *(pin_mux + i), args.node);
|
|
|
|
rv = stm32_gpio_config(&gpio_dsc, &gpio_ctl);
|
|
debug("%s: rv = %d\n\n", __func__, rv);
|
|
if (rv)
|
|
return rv;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct pinctrl_ops stm32_pinctrl_ops = {
|
|
.set_state_simple = stm32_pinctrl_set_state_simple,
|
|
};
|
|
|
|
static const struct udevice_id stm32_pinctrl_ids[] = {
|
|
{ .compatible = "st,stm32f746-pinctrl" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(pinctrl_stm32) = {
|
|
.name = "pinctrl_stm32",
|
|
.id = UCLASS_PINCTRL,
|
|
.of_match = stm32_pinctrl_ids,
|
|
.ops = &stm32_pinctrl_ops,
|
|
.bind = dm_scan_fdt_dev,
|
|
};
|